Journal of Failure Analysis and Prevention

, Volume 15, Issue 6, pp 803–809 | Cite as

Fatigue Failure Analysis Case Studies

Case History---Peer-Reviewed

Abstract

Fatigue fracture can occur in many components such as fasteners and tubular pole structures. In this paper, fatigue failure mechanisms have been described and the application of the principles for failure analysis for each case will be presented. Cyclic loading at stresses above the fatigue limit of the material can initiate cracks at the surface or at internal defects. Macroscopic and microscopic observations of fatigue crack initiation and approaches for characterization of fatigue failures have been described. Two case studies present application of laboratory analysis techniques to determine primary causes and modes of failures.

Keywords

Fatigue cracking Fatigue failure Metallurgical investigation Fracture 

Bibliography

  1. 1.
    S. Suresh, Fatigue of Materials, 2nd edn. (Cambridge University Press, Cambridge, 1998)CrossRefGoogle Scholar
  2. 2.
    J. Schijve, Fatigue of Structures and Materials (Kluwer Academic Publishers, Dordrecht, 2001)Google Scholar
  3. 3.
    ASM International, Fatigue and Fracture, ASM Handbook Online, vol. 19 (ASM International, Materials Park, 1996)Google Scholar
  4. 4.
    R.I. Stephens, A. Fatemi, R.R. Stephens, H.O. Fuchs, Metal Fatigue in Engineering, 2nd edn. (Wiley, New York, 2001)Google Scholar
  5. 5.
    Y. Murakami, K.J. Miller, What is fatigue damage? A view point from the observation of low cycle fatigue process. Int. J. Fatigue 27(8), 991–1005 (2005)CrossRefGoogle Scholar
  6. 6.
    ASM International, Fractography, ASM Handbook, vol. 12, 9th edn. (ASM International, Materials Park, 1987)Google Scholar
  7. 7.
    D. Hall, Fractography (Cambridge University Press, Cambridge, 1999)Google Scholar
  8. 8.
    M. Zamanzadeh, C. Kempkes, D. Aichinger, and D. Riley, Laboratory and field corrosion investigation of galvanized utility poles, Electrical transmission line and substation structures: 2006, pp. 235–249Google Scholar
  9. 9.
    M. Zamanzadeh, A. Gilpin-Jackson, Corrosion risk strategies for below-grade foundations of transmission and distribution structures. Mater. Perform. 35, 54–57 (2014)Google Scholar
  10. 10.
    R.W. Thompson, Evaluation of High-Level Lighting Poles Subjected to Fatigue Loading, Theses and Dissertations, 2012Google Scholar
  11. 11.
    M. Dawood, R. Goyal, H. Dhonde, T. Bradberry, Fatigue life assessment of cracked high mast illumination poles. J. Perform. Constr. 28, 311–320 (2014)CrossRefGoogle Scholar

Copyright information

© ASM International 2015

Authors and Affiliations

  • Mehrooz Zamanzadeh
    • 1
  • Edward Larkin
    • 1
  • Reza Mirshams
    • 2
  1. 1.ExovaPittsburghUSA
  2. 2.Department of Engineering TechnologyUniversity of North TexasDentonUSA

Personalised recommendations