Investigation of Compressor Failure in a Military Turbojet Engine
- 233 Downloads
During altitude maneuver loud bang sound was observed followed by rapid winding down of engine rotation and jet pipe temperature. Compressor casing top half was found severely ruptured and broken into many pieces. On viewing through the ruptured area compressor rotor blades were found sheared at the root. Systematic investigation revealed that the failure of compressor casing was due to sudden overload. Analyzing the possible reasons of sudden overload it could be concluded that the rupture of compressor casing was most probably due to surge during the maneuvers. Remedial measures are suggested to address such failures.
KeywordsDamage Defect analysis Fractography Fracture Jet engine Scanning electron microscope
The authors are very grateful to Chief Executive (Airworthiness), CEMILAC and Executive Director, Hindustan Aeronautics Limited, Engine Division for their kind permission to present this paper. The authors are very thankful to the staff and engineers of Quality Assurance Group, Engine Division, Hindustan Aeronautics Limited, Bangalore and members of defect investigation team for their valuable suggestions and supports during this investigation.
- 1.H. Cohen, G.F.C. Rogers, H.I.H. Saravanamuttoo, Gas Turbine Theory (Longman Group, Essex, 1996)Google Scholar
- 2.H. Ozaltun, J. Seidt et al., An energy-based method for uni-axial fatigue life calculation, GT2009-59512. Proceedings of ASME turbo expo 2009, June 2009, Orlando, FL, USAGoogle Scholar
- 3.A. Koul et al., Residual life assessment and life cycle management of design life expired discs, GT2009-60352. Proceedings of ASME turbo expo 2009, June 2009, Orlando, FL, USAGoogle Scholar
- 5.S. Suresh, Fatigue of Materials, 2nd edn. (Cambridge University Press, Cambridge, 2003), pp. 256–257Google Scholar
- 6.J.A. Bannantine, J.J. Comer, J.L. Handrock, Fundamental of Metal Fatigue Analysis (Prentice Hall, Englewood Cliffs, 1990), pp. 40–87Google Scholar
- 7.C.B. Meher-Homji, G. Gabriles, Gas turbine blade failures-causes, avoidance and trouble shooting. Proceedings of 27th turbomachinery symposium, 1995Google Scholar
- 10.M.P. Boyce, Gas Turbine Engineering Handbook, 2nd edn. (Gulf Professional Publishing, Houston, 2002)Google Scholar
- 11.T. Giampaolo, Gas Turbine Handbook: Principles and Practices, 3rd edn. (Fairmont Press, Lilburn, 2006)Google Scholar
- 12.A. Young, I. Day, G. Pullan, Stall Warning by Blade Pressure Signature Analysis, GT2011-45850, 2011Google Scholar
- 13.Z. Tong, L. Li, C. Nie, B. Lin, Y. Cui, W. Qi, Online Stall Control with the Digital Signal Processing Method in an Axial Compressor, GT2009-59509, 2009Google Scholar