Development of a Cornering Bench Fatigue Test for the Validation of a Lightweight Commercial Vehicle Front Hub
- 288 Downloads
Laboratory testing to validate the performance of vehicle components is a common practice in the automotive market. However, during standard bench testing of a commercial front wheel hub, several failures occurred in unexpected regions indicating an inconsistency with the vehicle cornering tests. This article addresses this inconsistency and presents methods for fatigue assessment using an accelerated rig (bench) test for a lightweight commercial vehicle front wheel hub. A complete cornering (figure of eight) vehicle test is modeled on a multi-body dynamic simulation system (ADAMS/Chassis) and the results are compared with the actual data obtained from the hub of a vehicle instrumented with a set of wheel force transducers. The multi-axial loading condition is successfully simplified due to the dominance of some stress components. Load data from the simulation are processed with the rain flow cycle counting algorithm. Critical locations on the C55 steel hub are determined with the stress analysis done on ANSYS (ANSYS Theory Reference: Release 10.0, 2005). Total damage is estimated by using the Palmgren–Miner linear damage summation rule. Finally, some validation test results are consistent with vehicle tests and may be used to substitute performance.
KeywordsFatigue life Automotive design Automotive failures Vehicle failures
The authors would like to thank the Ford Otosan Product Development Center, Kocaeli, Turkey, Chassis Engineering Department members: Erhan Eyol and Server Ersolmaz for providing simulation models and test results as well as their technical supports.
- 1.Fischer, G., Zinke, R.: Validation of wheel bearing systems in biaxial wheel/hub test facilities. SAE Technical Paper Series 2005-01-1827 (2005)Google Scholar
- 2.Fischer, G., Grubisic, V.: Design criteria and durability approval of wheel hubs. SAE Technical Paper Series 982840 (1998)Google Scholar
- 3.As, S.K.: Fatigue assessment of aluminum automotive structures. M.Sc. thesis, Department of Structural Engineering, The Norwegian University of Science and Technology (2002)Google Scholar
- 4.Gulbudak, K.: Translation: development of a bench fatigue test derived from a figure of eight test for a lightweight commercial vehicle front hub. M.Sc. thesis, Kocaeli University, pp. 6–23 (2009)Google Scholar
- 5.Subramanyam, V., Monkaba, V., Alexander, T.M.: A unique approach to all-wheel-drive vehicle dynamics model simulation and correlation. SAE Technical Paper Series 2000-01-3526 (2000)Google Scholar
- 6.ANSYS Theory Reference: Release 10.0. ANSYS, Inc., Houston, TX (2005)Google Scholar
- 7.Shigley, J.E., Mischke, C.R.: Mechanical Engineering Design, 5th edn. McGraw-Hill, Inc., New York (1989)Google Scholar
- 8.Genet, G., Johannesson, P., Gualandris, D., Mare, J., Nguyen-Tajan, T.M.-L.: An approach to multidimensional equivalent fatigue loadings. In: Proceedings of IMECE2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, 5–11 November 2005Google Scholar
- 9.Pilkey, W.D., Pilkey, D.F.: Peterson’s Stress Concentration Factors, 3rd edn. Wiley, New Jersey (2008)Google Scholar
- 10.Lampman, S.R. (technical ed.): ASM Handbook, vol. 19. Fatigue and Fracture. ASM International, Materials Park, OH (1996)Google Scholar