Journal of Failure Analysis and Prevention

, Volume 7, Issue 2, pp 127–136 | Cite as

Effect of Eccentricity on a Clutch System Under a Harmonically Varying Normal Load

Peer Reviewed

Abstract

This paper describes a clutch model having eleven degrees of freedom and three types of nonlinearity introduced by dry friction, double-stage stiffness, and spline clearances. The Coulomb friction formulations and spline clearance functions are smoothed before they are applied to the nonlinear system. The calculation of the dynamic response of the clutch is done by the Runge Kutta method. The dynamic behavior of both a healthy clutch system and clutch system containing an eccentricity defect is compared in the time and frequency domains. The effects of a harmonically varying load on the dynamic response of the defective clutch system with nonlinear dry friction and under sinusoidal torque excitation are also reported.

Keywords

dry friction clearance nonlinearity splines 

References

  1. 1.
    Padmanabhan, C., Singh R.: Dynamics of a piecewise non-linear system subject to dual harmonic excitation using parametric continuation. J. Sound Vib. 184(5), 767–799 (1995)Google Scholar
  2. 2.
    Gaillard, C.L., Singh, R.: Dynamic analysis of automotive clutch dampers. Appl. Acoust. 60, 399–424 (2000)CrossRefGoogle Scholar
  3. 3.
    Duan, C., Singh, R.: Super-harmonics in a torsional system with dry friction path subject to harmonic excitation under a mean torque. J. Sound Vib. 285, 803–834 (2005)CrossRefGoogle Scholar
  4. 4.
    Duan, C., Singh, R.: Transient responses of a 2-dof torsional system with nonlinear dry friction under a harmonically varying normal load. J. Sound Vib. 285, 1223–1234 (2005)CrossRefGoogle Scholar
  5. 5.
    Singh, R., Xie, H., Comparin, R.J.: Analysis of Automotive Neutral Gear Rattle. Academic Press Limited, London (1989)Google Scholar
  6. 6.
    Kim, T.C., Rook, T.E., Singh, R.: Super and sub-harmonic response calculations for a torsional system with clearance nonlinearity using the harmonic balance method. J. Sound Vib. 281, 965–993 (2005)CrossRefGoogle Scholar
  7. 7.
    Kim, T.C., Rook, T.E., Singh, R.: Effect of nonlinear impact damping on the frequency response of a torsional system with clearance. J. Sound Vib. 281, 995–1021 (2005)CrossRefGoogle Scholar
  8. 8.
    Kim, T.C., Singh, R.: Dynamic Interactions Between Loaded an Unloaded Gear Pair Under Rattle Conditions. Society of Automotive Engineers, Inc. 2001-01-1553Google Scholar
  9. 9.
    Dubowsky, S., Freudenstrein, F.: Dynamic analysis of mechanical systems with clearances, part 1: Formation of dynamic model, Transactions of the American Society of Mechanical Engineers. J. Eng. Ind. 93, 305–309 (1971)Google Scholar
  10. 10.
    Dubowsky, S., Freudenstrein, F.: Dynamic analysis of mechanical systems with clearances, part 2: dynamic response, Transactions of the American Society of Mechanical Engineers, J. Eng. Ind. 93 (1971)Google Scholar
  11. 11.
    Padmanabhan, C., Barlow, R.C., Rook, T.E., Singh, R.: Computational issues associated with gear rattle analysis. J. Mech. Design 117, 185–192 (1995)Google Scholar
  12. 12.
    Kim, T.C., Rook, T.E., Singh, R.: Effect of smoothening functions on the frequency response of an oscillator with clearance non-linearity. J. Sound Vib. 263, 665–678 (2003)CrossRefGoogle Scholar
  13. 13.
    Duan, C., Singh, R.: Dynamics of a 3dof torsional system with a dry friction controlled path. J. Sound Vib. 289(4–5), 657–688 (2005)Google Scholar
  14. 14.
    Kahraman, A., Singh, R.: Nonlinear dynamics of a geared rotor-bearing system with multiple clearances. J. Sound Vib. 144, 469–506 (1991)CrossRefGoogle Scholar
  15. 15.
    Karagiannis, K., Pfeiffer, F.: Theoretical and experimental investigations of gear-rattling. Nonlinear Dynam. 2, 367–387 (1991)CrossRefGoogle Scholar
  16. 16.
    Comparin, R.J., Singh, R.: Nonlinear frequency response characteristics of an impact pair. J. Sound Vib. 134(2), 259–290 (1989)CrossRefGoogle Scholar
  17. 17.
    Kim, Y.B., Noah, S.T.: Response and bifurcation of a MDOF rotor system with a strong nonlinearity. Nonlinear Dynam. 2, 215–234 (1991)CrossRefGoogle Scholar
  18. 18.
    Kono, K., Itoh, H., Nakamura, S., Yoshizawa, K.: Torque converter clutch slip control system. SAE Paper 950672 (1995)Google Scholar
  19. 19.
    Hahn, J., Lee, K.: Nonlinear robust control of torque converter clutch slip system for passenger vehicles using advanced torque estimation algorithms. Vehicle Syst. Dyn. 7(2), 175–192 (2002)CrossRefGoogle Scholar

Copyright information

© ASM International 2007

Authors and Affiliations

  1. 1.Unit Research of Mechanical Systems DynamicsNational School of EngineersSfaxTunisia

Personalised recommendations