Advertisement

Understanding Microstructural Evolution During Rapid Heat Treatment of Microalloyed Steels Through Computational Modeling, Advanced Physical Simulation, and Multiscale Characterization Techniques

  • B. M. WhitleyEmail author
  • J. G. Speer
  • R. Cryderman
  • J. Klemm-Toole
Article

Abstract

An AISI 1045 steel modified with vanadium (V) and niobium (Nb) was studied to evaluate microstructural conditioning prior to and throughout a rapid heat treat process. In order to accomplish this, both computational and physical simulation techniques have been employed with the goal of assessing the microstructural evolution in a medium-carbon bar steel during the rapid austenitization and quenching procedures involved in an induction hardening process. The appropriate thermal profiles for induction hardening were obtained through finite element modeling using Flux 2D software. Physical simulations of the induction hardening process were carried out using a Gleeble® 3500. Analysis of prior austenite grain size is complemented by observation of nanoscale carbonitride precipitation via transmission electron microscopy, scanning transmission electron microscopy, and high-energy synchrotron small-angle x-ray scattering. Through a combination of characterization techniques, this study presents a deeper understanding of nano- and microstructural changes occurring in a microalloyed steel during an induction hardening process.

Keywords

carbonitride precipitation computational modeling induction hardening microalloy physical simulation prior austenite grain size 

Notes

Acknowledgments

The authors acknowledge the support of the corporate sponsors of the Advanced Steel Processing and Products Research Center, an industry/university cooperative research center at the Colorado School of Mines. Additionally, special thanks are given to Cody Miller and Trevor Ballard for their technical contributions. This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under contract no. DE-AC02-06CH11357.

References

  1. 1.
    M. E. Burnett and C. F. Musolff, Induction Hardened Microalloy Steel Having Enhanced Fatigue Strength Properties, 5906691, 1999.Google Scholar
  2. 2.
    C. Rapids, T. G. H. L. Tubes, T. Kaneko, S. Katagiri, P. E. K. Seidel, and A. E. M. Elpel, Multiphase Microalloyed Steel and Method Thereof, 5213634, 1993.Google Scholar
  3. 3.
    M. Hamada, Y. Fukada, and Y. Komizo, Microstructure and Precipitation Behavior in Heat Affected Zone of a C-Mn Microalloyed Steel Containing Nb, V and Ti, ISIJ Int., 1995, 35(10), p 1196–1202CrossRefGoogle Scholar
  4. 4.
    P. Gong, E.J. Palmiere, and W.M. Rainforth, Dissolution and Precipitation Behaviour in Steels Microalloyed with Niobium During Thermomechanical Processing, Acta Mater., 2015, 97, p 392–403CrossRefGoogle Scholar
  5. 5.
    J.G. Speer and S.S. Hansen, Austenite Recrystallization and Carbonitride Precipitation in Niobium Microalloyed Steels, Metall. Trans. A, 1989, 20, p 25–38CrossRefGoogle Scholar
  6. 6.
    K.A. Taylor and S.S. Hansen, Effects of Vanadium and Processing Parameters on the Structures and Properties of a Direct-Quenched Low-Carbon Mo-B Steel, Metall. Trans. A, 1991, 22(10), p 2359–2374CrossRefGoogle Scholar
  7. 7.
    R. Barbosa, F. Boratto, S. Yue, and J. J. Jonas, The Influence of Chemical Composition on the Recrystallisation Behaviour of Microalloyed Steels, Processing, Microstructures and Properties of HSLA Steels, pp. 51–61, 1988Google Scholar
  8. 8.
    S. C. Kennett, Strengthening and Toughening Mechanisms in Low-C Microalloyed Martensitic Steel as Influenced by Austenite Conditioning, Ph.D. Thesis, Colorado School of Mines, 2014.Google Scholar
  9. 9.
    S. Zajac, Precipitation of Microalloy Carbo-Nitrides Prior, During and After γ/α Transformation, Mater. Sci. Forum, 2005, 500–501, p 75–86CrossRefGoogle Scholar
  10. 10.
    A. Fadel, D. Glišić, N. Radović, and D. Drobnjak, Influence of Cr, Mn and Mo Addition on Structure and Properties of V Microalloyed Medium Carbon Steels, J. Mater. Sci. Technol., 2012, 28(11), p 1053–1058CrossRefGoogle Scholar
  11. 11.
    P. Maugis and M. Gouné, Kinetics of Vanadium Carbonitride Precipitation in Steel: A Computer Model, Acta Mater., 2005, 53(12), p 3359–3367CrossRefGoogle Scholar
  12. 12.
    C. Sun, Q. Cai, H. Wu, H. Mao, and H. Chen, Effect of Controlled Rolling Processing on Nanometer-Sized Carbonitride of Ti-Mo Ferrite Matrix Microalloyed Steel, Acta Metall. Sin., 2012, 48(12), p 1415–1421CrossRefGoogle Scholar
  13. 13.
    D.K. Matlock and J.G. Speer, Microalloying Concepts and Application in Long Products, Mater. Sci. Technol., 2009, 25(9), p 1118–1125CrossRefGoogle Scholar
  14. 14.
    A. S. E112-12, Standard Test Methods for Determining Average Grain Size, ASTM International. pp. 1–27, 2013.Google Scholar
  15. 15.
    Personal Communication with Robert Goldstein, Fluxtrol Inc., 2015.Google Scholar
  16. 16.
    F. Kurosawa, I. Taguchi, and R. Matsumoto, Observation of Precipitates and Metallographic Grain Orientation n Steel by a Non-aqueous Electrolyte-Potentionstic Etching Method, J. Jpn. Inst. Metals, 1979, 43, p 1068–1077CrossRefGoogle Scholar
  17. 17.
    Y. Oba, S. Koppoju, M. Ohnuma, T. Murakami, H. Hatano, K. Sasakawa, A. Kitahara, and J. Suzuki, Quantitative Analysis of Precipitate in Vanadium-Microalloyed Medium Carbon Steels Using Small-Angle x-ray and Neutron Scattering Methods, ISIJ Int., 2011, 51(11), p 1852–1858CrossRefGoogle Scholar
  18. 18.
    S.S. Campos, E.V. Morales, and H.-J. Kestenbach, A Quantitative Study of Interphase Precipitation in a Commercial Microalloyed Steel, Mater. Sci. Forum, 2003, 426–432, p 1517–1522CrossRefGoogle Scholar
  19. 19.
    Y. Yazawa, T. Furuhara, and T. Maki, Effect of Matrix Recrystallization on Morphology, Crystallography and Coarsening Behavior of Vanadium Carbide in Austenite, Acta Mater., 2004, 52(12), p 3727–3736CrossRefGoogle Scholar
  20. 20.
    E.V. Pereloma, A.G. Kostryzhev, A. Alshahrani, C. Zhu, and J.M. Cairney, Effect of Austenite Deformation Temperature on Nb Clustering and Precipitation in Microalloyed Steel, Scr. Mater., 2014, 75, p 74–77CrossRefGoogle Scholar
  21. 21.
    T. Yokomizo, M. Enomoto, O. Umezawa, G. Spanos, and R. Rosenberg, Three-Dimensional Distribution, Morphology, and Nucleation site of Intragranular Ferrite Formed in Association with Inclusions, Mater. Sci. Eng., A, 2003, 344(1–2), p 261–267CrossRefGoogle Scholar
  22. 22.
    J. Ilavsky and F. Zhang, Development of Combined Microstructure and Structure Characterization Facility for In Situ and Operando Studies at the Advanced Photon Source, J. Appl. Crystallogr., 2018, 51, p 867–882CrossRefGoogle Scholar
  23. 23.
    J. Ilavsky and P.R. Jemian, Irena: Tool Suite for Modeling and Analysis of Small-Angle Scattering, J. Appl. Crystallogr., 2019, 42, p 347–353CrossRefGoogle Scholar
  24. 24.
    J. Ilavsky, Nika: Software for Two-Dimensional Data Reduction, J. Appl. Crystallogr., 2012, 45(2), p 324–328CrossRefGoogle Scholar
  25. 25.
    I.I. Gorbachev, A.Y. Pasynkov, and V.V. Popov, Prediction of the Austenite Grain Size of Microalloyed Steels Based on the Simulation of the Evolution of Carbonitride Precipitates, Phys. Metals Metallogr., 2015, 116(11), p 1184–1191CrossRefGoogle Scholar
  26. 26.
    R. L. Cryderman and, J. G. Speer, Microstructure and Notched Resistance of 0.56% C Steels After Simulated Induction Hardening, in Proceedings: 29th ASM Heat Treat Society Conference, Columbus, OH, October 24–26, 2017, pp. 226–233.Google Scholar

Copyright information

© ASM International 2019

Authors and Affiliations

  • B. M. Whitley
    • 1
    Email author
  • J. G. Speer
    • 1
  • R. Cryderman
    • 1
  • J. Klemm-Toole
    • 1
  1. 1.Colorado School of MinesGoldenUSA

Personalised recommendations