Fabrication of Silver-Graphite Contact Materials Using Silver Nanopowders

Article
First Online:
Received:
Revised:
Accepted:

Abstract

Silver-graphite (AgC) composites are used in electrical switchgears as arcing as well as sliding contacts. AgC composite powders for electrical contact applications are conventionally prepared using micron-size silver powder. Present investigation is aimed at exploring the effect of nanosize silver powder, made by colloidal synthesis route, on the processing and properties of AgC contact materials. The AgC composite powders synthesized from micron-size and nanosize silver powders, respectively, are characterized for particle size distribution by dynamic light scattering technique, x-ray diffraction, and scanning electron microscopy. The bulk solid compacts produced by conventional powder metallurgy process of pressing, sintering, and repressing of AgC composite powders are evaluated for their density, microhardness, electrical conductivity, and microstructure. The study reveals that the use of nanosize silver powder not only leads to reduction in sintering temperature but also contributes in improving the properties of the AgC contact materials.

Keywords

composite materials electrical contact material nanocomposites powder technology silver-graphite contacts sintering 
This is a preview of subscription content, log in to check access.

References

  1. 1.
    G.J.Witter (2002) Arcing Contact Materials,Electrical Contacts – Principles and Applications, P.G.Slade, Ed., Marcel Dekker, New York, p 681-749Google Scholar
  2. 2.
    P.B.Joshi, P.Ramakrishnan (2004) Applications, Materials for Electrical and Electronic Contact – Processing, Properties and Applications, Science Publishers, Enfield, NH, p 165-177Google Scholar
  3. 3.
    P.C. Wingert, The Effects of Interrupting Elevated Currents on the Erosion and Structure of Silver-Graphite, Proceedings of the 42nd IEEE Holm Conference on Electrical Contacts, 16-20 Sept 1996 (Chicago, IL), 1996, p 60–69Google Scholar
  4. 4.
    B.R.Rehani, P.B.Joshi, Silver-Graphite Nanocomposite Materials for Electrical Contact Applications, Trans Powder Metall Assoc India, 31, 2005, p 7-10Google Scholar
  5. 5.
    M.P.Afonin, A.V.Boiko (2005) Effect of Structural Anisotropy on Contact Properties in a Silver-Graphite Composite, Powder Metall Met Ceram, 44(1-2): 84-87CrossRefGoogle Scholar
  6. 6.
    K.H. Schroder (1987) Development of Contact Materials for Power Engineering in Europe, IEEE Trans. CHMT 10(1): 163-173Google Scholar
  7. 7.
    P.C.Wingert, S.E.Allen, R.C. Bevington (1992) The Effects of Graphite Particle Size and Processing on the Performance of Silver-Graphite Contacts, IEEE Trans CHMT, 15(2): 154 -159Google Scholar
  8. 8.
    V. Behrens, Th. Honig, A. Kraus, E. Mahle, R. Michal, and K.E. Saeger, Test Results of Different Silver/Graphite Contact Materials in Regard to Applications in Circuit Breakers, Proceedings of the 41st IEEE Holm Conference on Electrical Contacts, 2-4 Oct 1995 (Montreal, Canada), 1995, p 393–397Google Scholar
  9. 9.
    C.Suryanarayan, C.C.Koch, Nanocrystalline Materials-Current Research and Future Directions, Hyperfine Interact., 130, 2000, p 5-44CrossRefADSGoogle Scholar
  10. 10.
    Yu, H., Lei J., Ma X., Zhu L., Lu Y., Xiang J., Weng W. (2004) Application of Nanotechnology in a Silver/Graphite Contact Material and Optimization of its Physical and Mechanical Properties, Rare Metals, 23(1), 79- 83Google Scholar
  11. 11.
    T. Hayashi, Silver Sol, Preparation Thereof, Coating Material for Forming Transparent Conductive Film and Transparent Conductive Film, U.S. Patent 5,957,828, 28 Sept 1999Google Scholar
  12. 12.
    P.K.Khanna, N. Singh, D. Kulkarni, S. Charan, P.V.Adhyapak, Water Based Simple Synthesis of Re-Dispersible Silver Nano-particles, Mater Lett, 61, 2007, p 3366-3370CrossRefGoogle Scholar
  13. 13.
    P.K.Khanna, N. Singh, S.Charan, A.K.Viswanath, Synthesis of Ag/Polyaniline Nanocomposite via an In Situ Photo Redox Mechanism, Mater Chem Phys, 92, 2005, p 214 -219CrossRefGoogle Scholar
  14. 14.
    S.Charan, N.Singh, P.K.Khanna, K.R.Patil, Direct Synthesis of Nanocrystalline Silver from Reaction Between Silver Carboxylates and n-Trioctylphosphine, J. Nanosci. Nanotechnol., 6, 2006, p 2095-2102CrossRefPubMedGoogle Scholar
  15. 15.
    R.P.Bagwe, K.C.Khilar, Effects of Intermicellar Exchange Rate on the Formation of Silver Nanoparticles in Reverse Microemulsions of AOT, Langmuir, 16, 2000, p 905-910CrossRefGoogle Scholar
  16. 16.
    R.Malewar, K.S.Kumar, B.S.Murty, B.Sharma, S.K.Pabi, On Sinterability of Nanostructured W Produced by High-Energy Ball Milling, J Mater Res, 22,2007, p 1200 -1206CrossRefADSGoogle Scholar
  17. 17.
    C. Lambert and G. Cambon, The Influence of Manufacture Conditions and Metallurgical Characteristics on the Electrical Behavior of Materials Silver-Graphite Contact, Proceedings of the 9th International Conference on Electrical Contact and Phenomena (Chicago, IL), 1978, p 401–406Google Scholar
  18. 18.
    J.R.Groza (1999) Sintering of Nanocrystalline Powders, Int. J. Powder Metall. 35(7), 59-66Google Scholar
  19. 19.
    J.R.Groza, R.J.Dowding, Nanoparticulate Materials Densification, Nanostruct. Mater., 7(7), 1996, p 749-768CrossRefGoogle Scholar
  20. 20.
    N.S. Hoyer, Electrical-Contact Materials, Metals Handbook on Powder Metallurgy, J.R. Davis and S.K. Refsnes, Eds., American Society for Metals, Metals Park, OH, 1984, p 662–695Google Scholar

Copyright information

© ASM International 2009

Authors and Affiliations

  1. 1.Metallurgical and Materials Engineering DepartmentM. S. University of BarodaVadodaraIndia
  2. 2.Nanoscience GroupCentre for Materials for Electronic Technology (C-MET)PuneIndia

Personalised recommendations