Journal of Electronic Materials

, Volume 27, Issue 3, pp 149–158 | Cite as

Thermodynamics of the Sn-In-Ag solder system

  • T.-M. Korhonen
  • J. K. Kivilahti
Regular Issue Paper
Received:
Accepted:

Abstract

The lead-free solder system Sn-In-Ag was studied both experimentally and by thermodynamic modeling. Thermodynamic descriptions for the phases in Ag-In and In-Sn binary systems were optimized taking into account the available thermodynamic and phase equilibria data. They were combined with the previously assessed Ag-Sn binary system to get a complete thermodynamic description of the Sn-In-Ag system. The thermodynamic functions obtained are used to model the solidifying behavior of the alloys with diagrams of the relative amount of phases (microstructures) as a function of temperature and the effect of diffusional segregation on the solidification path. The solidification of alloys of different compositions and its relevance to the microstructure and mechanical properties of the solidified solder are discussed. In the experimental research, alloys of different compositions were heat treated and analyzed by differential scanning calorimetry (DSC), optical microscopy, and scanning electron microscopy/electron probe microanalysis techniques. Ternary alloys were annealed at 250°C to gain information about the location of the phase boundaries at this rather typical soldering temperature. Diffusion couple experiments were performed to investigate the interfacial reaction between Ag and binary SnIn and to find out the diffusion paths taken by the system. The melting/solidification behavior of the alloys in the Sn corner of the ternary diagram were investigated by DSC. It was discovered that a strong segregation takes place during the cooling of some In-containing solder alloys as the In component is rejected from the solid with an excess of In remaining in the liquid. At high enough In concentrations (>16%), this results in partial melting of the solder at temperatures in excess of 113°C.

Key words

Pb-free solder phase diagrams thermodynamic modeling 
This is a preview of subscription content, log in to check access.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    U.R. Kattner and W.J. Boettinger, J. Electron. Mater. 23, 603 (1994).Google Scholar
  2. 2.
    W.J. Tomlinson and I. Collier, J. Mater. Sci. 22, 1835 (1987).CrossRefGoogle Scholar
  3. 3.
    I. Karakaya and W.T. Thompson, Bull. Alloy Phase Diagrams 8, 340 (1987).Google Scholar
  4. 4.
    P.-Y. Chevalier, Thermochim. Acta 136, 45 (1988).CrossRefGoogle Scholar
  5. 5.
    A.T. Dinsdale, CALPHAD 15, 317 (1991).CrossRefGoogle Scholar
  6. 6.
    O. Redlich, A. Kister, Ind. Eng. Chem. 40, 3618 (1948).Google Scholar
  7. 7.
    Y.-M. Muggianu, M. Gambino and J.-P. Bros, J. Chim. Phys. 72, 85 (1975).Google Scholar
  8. 8.
    B.-J. Lee, C.-S. Oh and J.H. Shim, J. Electron. Mater. 25, 983 (1998).Google Scholar
  9. 9.
    M.R. Baren, Phase Diagrams of Indium Alloys and Their Engineering Applications, eds. C.E.T. White and H. Okamoto (Materials Park, OH: ASM Intl., 1992), p. 15.Google Scholar
  10. 10.
    F. Weibke and H. Eggers, Z. Anorg. Chem. 222, 145 (1935).CrossRefGoogle Scholar
  11. 11.
    A.N. Campbell, R Wageman and R.B. Ferguson, Can. J. Chem. 48, 1703 (1970).CrossRefGoogle Scholar
  12. 12.
    C.B. Alcock, R. Sridhar and R.C. Svedberg, Acta Met. 17, 839 (1969).CrossRefGoogle Scholar
  13. 13.
    G. Qi, M. Hino and T. Azakami, Mater. Trans. JIM 30, 575 (1989).Google Scholar
  14. 14.
    K Kameda, Y. Toshida and S. Sakairi, J. Jpn. Inst. Metals 45, 614 (1981).Google Scholar
  15. 15.
    T. Nozaki, M. Shimoji and K. Niwa, Trans. Jpn. Inst. Metals 7, 52 (1966).Google Scholar
  16. 16.
    R. Castanet, Y. Clair and M. Laffitte, J. Chim. Phys. 67, 789 (1970).Google Scholar
  17. 17.
    R. Beja and M. Laffitte, C.R. Acad. Sci. 267C, 123 (1968).Google Scholar
  18. 18.
    O.J. Kleppa, J. Phys. Chem. 60, 846 (1956).CrossRefGoogle Scholar
  19. 19.
    D.B. Masson and S.S. Prahad, Metall. Trans. A 4, 991 (1973).Google Scholar
  20. 20.
    C.B. Alcock, K.R. Jacob and T. Palamutcu, Acta Metall. 21, 1003 (1973).CrossRefGoogle Scholar
  21. 21.
    H. Okamoto, Phase Diagrams of Indium Alloys and Their Engineering Applications, eds. C.E.T. White and H. Okamoto (Materials Park, OH: ASM Intl., 1992), p. 255.Google Scholar
  22. 22.
    T. Heumann and O. Alpaut, J. Less-Common Metals 6, 108 (1964).CrossRefGoogle Scholar
  23. 23.
    B. Predel and T. Godecke, Z. Metallkd. 66, 654 (1975).Google Scholar
  24. 24.
    O. Cakir and O. Alpaut, J. Less Common Metals 141, 11 (1988).CrossRefGoogle Scholar
  25. 25.
    J.P. Bros and M. Laffitte, J. Chem. Thermodynamics 2, 151 (1970).CrossRefGoogle Scholar
  26. 26.
    F.E. Wittig and P. Scheidt, Z. Phys. Chem. 28, 120 (1961).Google Scholar
  27. 27.
    O.J. Kleppa, J. Phys. Chem. 60, 842 (1956).CrossRefGoogle Scholar
  28. 28.
    J. Terpilowski and E. Przezdziecka-Mycielska, Arch. Hutn. 5, 281 (1960).Google Scholar
  29. 29.
    O. Alpaut and T. Heumann, Acta Metall. 13, 543 (1965).CrossRefGoogle Scholar
  30. 30.
    R. Hultgren, P. Desai, D. Hawkins, M. Gleiser, K. Kelley, Selected Values of the Thermodynamic Properties of Binary Alloys, (Materials Park, OH: ASM Intl., 1973), p. 1031.Google Scholar
  31. 31.
    P.-Y. Chevalier, CALPHAD 12, 383 (1988).CrossRefGoogle Scholar
  32. 32.
    J.P. Nabot and I. Ansara, Bull. Alloy Phase Diagrams 8, 246 (1987).Google Scholar
  33. 33.
    V.J. Kuck, Thermochimica Acta 99, 233 (1986).CrossRefGoogle Scholar
  34. 34.
    I. Artaki, A.M. Jackson and P.T. Vianco, Soldering and Surface Mount Technology 20, 27 (1995).Google Scholar

Copyright information

© TMS-The Minerals, Metals and Materials Society 1998

Authors and Affiliations

  • T.-M. Korhonen
    • 1
  • J. K. Kivilahti
    • 1
  1. 1.Department of Materials Science and EngineeringHelsinki University of TechnologyEspooFinland

Personalised recommendations