Journal of Electronic Materials

, Volume 34, Issue 6, pp 786–790 | Cite as

Optical and microstructural characterization of the effects of rapid thermal annealing of CdTe thin films grown on Si (100) substrates

  • S. Neretina
  • N. V. Sochinskii
  • P. Mascher
Special Issue Paper

Abstract

The effects of rapid thermal annealing (RTA) on CdTe/Si (100) heterostructures have been studied in order to improve the structural quality of CdTe epilayers. Samples of CdTe (111) polycrystalline thin films grown by vapor phase epitaxy (VPE) on Si (100) substrates have been investigated. The strained structures were rapidly thermally annealed at 400°C, 450°C, 500°C, 550°C, and 600°C for 10 sec. The microstructural properties of the CdTe films were characterized by carrying out scanning electron microscopy (SEM), x-ray diffraction (XRD), and atomic force microscopy (AFM). We have shown that the structural quality of the CdTe epilayers improves significantly with increasing annealing temperature. The optimum annealing temperature resulting in the highest film quality has been found to be 500°C. Additionally, we have shown that the surface nucleation characterized by the island size distribution can be correlated with the crystalline quality of the film.

Key words

Infrared (IR) detection CdTe/Si heterostructures rapid thermal annealing (RTA) structural characterization 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    E.R. Gertner, S.H. Shin, D.D. Edwall, L.O. Bubulac, D.S. Lo, and W.E. Tennant, Appl. Phys. Lett. 46, 851 (1985).CrossRefGoogle Scholar
  2. 2.
    N.C. Giles-Taylor, R.N. Bicknell, D.K. Blanks, T.H. Myers, and J.F. Schetzina, J. Vac. Sci. Technol. A 3, 76 (1985).CrossRefGoogle Scholar
  3. 3.
    J. Thompson, K.T. Woodhouse, and C. Dineen, J. Cryst. Growth 77, 452 (1986).CrossRefGoogle Scholar
  4. 4.
    R.F.C. Farrow, J. Vac. Sci. Technol. A 3, 60 (1985).CrossRefGoogle Scholar
  5. 5.
    R.E. Kay, R.C. Bean, K.R. Zanio, C. Ito, and D. McIntyre, Appl. Phys. Lett. 51, 2211 (1987).CrossRefGoogle Scholar
  6. 6.
    Y.P. Chen, S. Sivananthan, and J.P. Faurie, J. Electron. Mater. 22, 951 (1993).Google Scholar
  7. 7.
    C.H. Wang, K.Y. Cheng, and S.J. Yang, Appl. Phys. Lett. 46, 962 (1985).CrossRefGoogle Scholar
  8. 8.
    H. Sitter, K. Lischa, W. Faschinger, J. Wolfrum, H. Pascher, and J.L. Pautrat, J. Cryst. Growth 86, 377 (1988).CrossRefGoogle Scholar
  9. 9.
    N.V. Sochinskii, E. Dieguez, E. Alves, M.F. da Silva, J.C. Soares, S. Bernardi, J. Garrido, and F. Agullo-Rueda, Semicond. Sci. Technol. 11, 248 (1996).CrossRefGoogle Scholar
  10. 10.
    J. Rams, N.V. Sochinskii, V. Munoz, and J.M. Cabrera, Appl. Phys. A 71, 277 (2000).CrossRefGoogle Scholar
  11. 11.
    H. Ebe and Y. Nishijima, Appl. Phys. Lett. 67, 3138 (2005).CrossRefGoogle Scholar

Copyright information

© TMS-The Minerals, Metals and Materials Society 2005

Authors and Affiliations

  • S. Neretina
    • 1
  • N. V. Sochinskii
    • 2
  • P. Mascher
    • 1
  1. 1.Centre for Electrophotonic Materials and Devices (CEMD), Department of Engineering PhysicsMcMaster UniversityHamiltonCanada
  2. 2.Instituto de Microelectronica de Madrid-CNM-CSICTres Cantos, MadridSpain

Personalised recommendations