Advertisement

Kinetics and Mechanism of Low-Grade Manganese Ore Reduction by Natural Gas

  • Alireza CheraghiEmail author
  • Hossein YoozbashizadehEmail author
  • Eli Ringdalen
  • Jafar Safarian
Article
  • 9 Downloads

Abstract

The calcination and the reduction behaviors of a low-grade manganese ore by methane was studied at 973 K to 1273 K by several techniques. The onset temperatures of thermal decompositions of pyrolusite and calcite phases for this ore were found to be 868 K and 1056 K, and the rates of decompositions are obtained as 1.4 × 10−3 s−1 and 1.53 × 10−3 s−1, respectively. Because of the presence of manganese in the goethite structure of the ore, the goethite decomposition resulted in higher degrees of decomposition and magnetite formation at the studied temperature range. The exothermic reduction of manganese oxides to MnO started prior to the reduction of the coexisting iron oxides, and the apparent activation energy of reduction of Mn3O4 to MnO was determined. The reduction of manganese oxides resulted in CO2 gas release due to the reaction of H2O with the carbon supplied via methane cracking. Although manganese oxide minerals of the ore were not carburized at the experimental conditions, the manganese associated with iron oxides was carburized to cementite ((Fe,Mn)3C), and it was accompanied with CO gas release. Higher rates and extents of manganese oxides reduction were obtained with increase in temperature; however, the simultaneous formation of manganese silicates was more favorable at higher temperatures and hindered complete reduction.

Notes

Acknowledgments

This study has been done in the laboratories at NTNU and SINTEF, and the support from both institutes is acknowledged. This work has been supported by the Research Domain 2 in SFI-Metal production; a Norwegian Centre for Research-Based Innovation.

References

  1. 1.
    N. Anacleto, O. Ostrovski, and S. Ganguly: ISIJ international, 2004, vol. 44, pp. 1480–87.CrossRefGoogle Scholar
  2. 2.
    J. Adanez, L.F. de Diego, F. Garcia-Labiano, P. Gayan, A. Abad, and J.M. Palacios: Energy & Fuels, 2004, vol. 18, pp. 371–77.CrossRefGoogle Scholar
  3. 3.
    R. Eric, A. Bhalla, P. Halli, and P. Taskinen: Solid state Reduction of Iron, Manganese and Chromium Oxide Ores with Methane, in Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies. 2017, Springer. pp. 307–18.Google Scholar
  4. 4.
    A. Bhalla and R.H. Eric: INFACON XIV, 2015, vol. 1, pp. 461–69.Google Scholar
  5. 5.
    O. Ostrovski and G. Zhang: AIChE Journal, 2006, vol. 52, pp. 300–10.CrossRefGoogle Scholar
  6. 6.
    N. Anacleto, O. Ostrovski, and S. Ganguly: ISIJ International, 2004, vol. 44, pp. 1615–22.CrossRefGoogle Scholar
  7. 7.
    R. Elliott, K. Coley, S. Mostaghel, and M. Barati: JOM, 2018, vol. 70, pp. 680–90.CrossRefGoogle Scholar
  8. 8.
    O. Ostrovski: The Use of Natural Gas for Reduction of Metal Oxides: Constraints and Prospects, in Celebrating the Megascale. 2014, Springer. pp. 529–36.Google Scholar
  9. 9.
    H. Dalaker and P. Tetlie: Decomposition of Methane During Oxide Reduction with Natural Gas, in Celebrating the Megascale. 2014, Springer. pp. 537–46.Google Scholar
  10. 10.
    K. Ohla and H. Grabke: Materials and Corrosion, 1982, vol. 33, pp. 341–46.CrossRefGoogle Scholar
  11. 11.
    B. Liu, Y. Zhang, Z. Su, Z. Peng, G. Li, and T. Jiang: JOM, 2017, vol. 69, pp. 1669–75.CrossRefGoogle Scholar
  12. 12.
    G. Akdogan and R.H. Eric: Metallurgical and Materials Transactions B, 1995, vol. 26, pp. 13–24.CrossRefGoogle Scholar
  13. 13.
    B. Liu, Y. Zhang, Z. Su, M. Lu, G. Li, and T. Jiang: Powder Technology, 2018, vol. 325, pp. 271–79.CrossRefGoogle Scholar
  14. 14.
    E.E. Sileo, M. Alvarez, and E.H. Rueda: International Journal of Inorganic Materials, 2001, vol. 3, pp. 271–79.CrossRefGoogle Scholar
  15. 15.
    R. Cornell and R. Giovanoli: Clays and Clay Minerals, 1987, vol. 35, pp. 11–20.CrossRefGoogle Scholar
  16. 16.
    W. Stiers and U. Schwertmann: Geochimica et Cosmochimica Acta, 1985, vol. 49, pp. 1909–11.CrossRefGoogle Scholar
  17. 17.
    M.S.S. Silva, M.M.F. Lima, L.M. Graça, and R.M.F. Lima: International Journal of Mineral Processing, 2016, vol. 150, pp. 54–64.CrossRefGoogle Scholar
  18. 18.
    H. Liu, T. Chen, X. Zou, C. Qing, and R.L. Frost: Thermochimica Acta, 2013, vol. 568, pp. 115–21.CrossRefGoogle Scholar
  19. 19.
    T. De Bruijn, T. Soerawidjaja, W. De Jongt, and P. Van Den Berg: Chemical Engineering Science, 1980, vol. 35, pp. 1591–99.CrossRefGoogle Scholar
  20. 20.
    H.E. Barner and C.L. Mantell: Industrial & Engineering Chemistry Process Design and Development, 1968, vol. 7, pp. 285–94.CrossRefGoogle Scholar
  21. 21.
    N. El-Hussiny, H.H.A. El-Gawad, F. Mohamed, and M. Shalabi: International Journal of Scientific & Engineering Research, 2015, vol. 6, pp. 339–46.Google Scholar
  22. 22.
    B. Sorensen, S. Gaal, E. Ringdalen, M. Tangstad, R. Kononov, and O. Ostrovski: International Journal of Mineral Processing, 2010, vol. 94, pp. 101–10.CrossRefGoogle Scholar
  23. 23.
    L. Zhou, L.R. Enakonda, S. Li, D. Gary, P. Del-Gallo, C. Mennemann, and J.M. Basset: Journal of the Taiwan Institute of Chemical Engineers, 2018, vol. 87, pp. 54–63.CrossRefGoogle Scholar
  24. 24.
    R. Ishak: Reaction Kinetics for Reduction of Manganese Ore with Carbon Monoxide in the Presence of Carbon, ISBN: 82-471-5528-1, in Department of Materials Science and Engineering. 2002, Norwegian University of Science and Technology, Trondheim.Google Scholar
  25. 25.
    Y. Nasiri, M. Panjepour, and M. Ahmadian: International Journal of Mineral Processing, 2016, vol. 153, pp. 17–28.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2019

Authors and Affiliations

  1. 1.Sharif University Technology (SUT)TehranIran
  2. 2.SINTEF, Materials and ChemistryTrondheimNorway
  3. 3.Norwegian University of Science and Technology (NTNU)TrondheimNorway

Personalised recommendations