Advertisement

Fundamentals of Hydrogen Solubility in Calcium-Alumino-Silicate Molten Fluxes Containing NaF

  • Sung Hoon Chung
  • Il SohnEmail author
Article
  • 27 Downloads

Abstract

The effect of the NaF and CaO/SiO2 ratio (mass percentage ratio) on hydrogen solubility in a CaO-SiO2-Al2O3-NaF system was studied and correlated to the structural units of the molten flux. Fourier transformed infrared, Raman, and X-ray photoelectron spectroscopy analyses were used to evaluate the structural units with NaF additions and various CaO/SiO2 ratios. At a CaO/SiO2 ratio of 0.8, the incorporated-hydroxyl dissolution mechanism is dominant, whereas the free-hydroxyl mechanism is pronounced at higher CaO/SiO2 ratio. At low NaF contents, the hydrogen solubility as a function of the CaO/SiO2 ratio showed a parabolic trend with a minimum typical of a change from incorporated- to a free-hydroxyl dissolution mechanism. The addition of network-modifying NaF depolymerizes the structural units of the flux, reducing the available sites for incorporated-hydroxyl groups. The hydrogen solubility behavior in the flux system correlates well with the structural analysis, where a high NaF content and CaO/SiO2 ratio are shown to depolymerize the complex structural units of the molten flux.

Notes

Acknowledgments

This work was supported by the Brain Korea 21 Plus Project and the Ministry of Trade, Industry & Energy (No. 10052751).

References

  1. 1.
    C. Lesch, N. Kwiaton, and F.B. Klose: Steel Res. Int., 2017, vol. 88, pp.1-21.CrossRefGoogle Scholar
  2. 2.
    J.E. Gould, S.P. Khurana, and T. Li: Welding J., 2006, vol. 86, pp.111-6.Google Scholar
  3. 3.
    X. Liu, S. Lan and J. Ni: Mater. Design, 2014, vol. 59, pp. 50-62.CrossRefGoogle Scholar
  4. 4.
    J.-E. Jin and Y.-K Lee (2011) Advanced Steels. Springer, Berlin, pp. 259-64.CrossRefGoogle Scholar
  5. 5.
    J.-E. Jin and Y.-K. Lee: Acta Mater., 2012, vol. 60, pp. 1680-8.CrossRefGoogle Scholar
  6. 6.
    V. Gunaraj and N. Murugan: Weld. Res., 2002, vol. 5, pp. 94-98.Google Scholar
  7. 7.
    Y. Yan, Y. Yan, Y. He, J. Li, Y. Su, and L. Qiao: Int. J. Hydrogen Energy, 2014, vol. 39, pp.17921-28.CrossRefGoogle Scholar
  8. 8.
    W.F. Savage, E.F. Nippes, and E.S. Szekeres: Weld. Res., 1976, 55, pp. 276-83.Google Scholar
  9. 9.
    B. Dixon and K. Hakansson: Weld. Res., 1995, vol. 74, pp. 122-132.Google Scholar
  10. 10.
    M. Ito, K. Morita and N. Sano: ISIJ Int, 1997, vol. 37, pp. 839-43.CrossRefGoogle Scholar
  11. 11.
    M. Pitrun, D. Nolan, and D. Dunne: Weld. World, 2004, vol. 48, pp. 2–13.CrossRefGoogle Scholar
  12. 12.
    J.H. Kiefer: Weld. Res. Suppl., 1996, pp. 155s–61s.Google Scholar
  13. 13.
    S. Kimura, M. Furuya, and A. Tanaka: Tetsu-to-Hagane, 1978, vol. 64, pp. 240-9.CrossRefGoogle Scholar
  14. 14.
    S.R. Bragan, J.M. Hohemberger, J. Vicenzi, C.M. Marques, T. Basegio, A.N.C. Lima, and C.P. Bergmann: Steel Res. Int., 2006, vol. 77, pp. 400-3.CrossRefGoogle Scholar
  15. 15.
    J.L. Davidson: Aust. Weld. J., 1998, vol. 43, pp. 33–39.Google Scholar
  16. 16.
    C. Wildash, R.C. Cochrane, R. Gee, and D.J. Widgery: Procceeding of the 5th International Conference on Trends in Welding Research, 1998, pp. 745–50.Google Scholar
  17. 17.
    J. Brandberg and D. Sichen: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 389-93.CrossRefGoogle Scholar
  18. 18.
    D.A. Meyn: Metall. Trans., 1974, vol. 5, pp. 2405-14.CrossRefGoogle Scholar
  19. 19.
    J.-Y Park, S.J. Park, W.S. Chang, and I. Sohn: J. Am. Ceram. Soc., 2012, vol. 95, pp. 1756-63.CrossRefGoogle Scholar
  20. 20.
    J.-Y. Park, W.-S. Chang, and I. Sohn: Sci. Technol. Weld. Joi., 2012, vol. 17, pp. 134–40.CrossRefGoogle Scholar
  21. 21.
    S.H. Chung and I. Sohn: Int. J. Hydrogen Energy, 2014, vol. 39, pp. 18490-7.CrossRefGoogle Scholar
  22. 22.
    S.H. Chung and I. Sohn: Int. J. Hydrogen Energy, 2015, vol. 40, pp. 15893-900.CrossRefGoogle Scholar
  23. 23.
    J.H. Walsh, J. Chipman, T.B. King, and N.J. Grant: T. Jpn. I. Met., 1956, vol. 206, pp. 1568-76.Google Scholar
  24. 24.
    G.H. Kim, C.-S. Kim, I. Sohn (2013) ISIJ Int 53:170–176.CrossRefGoogle Scholar
  25. 25.
    T. Fukushima, Y. Iguchi, S. Banya, and T. Fuwa: T. Iron Steel I. Jpn., 1966, vol. 6, pp. 19-26.Google Scholar
  26. 26.
    B. Erdem, R.A. Hunsicker, G.W. Simmons, E.D. Sudol, V.L. Dimonie, and M.S. Aasser: Langmuir, 2001, vol. 17, pp. 2664-2669.CrossRefGoogle Scholar
  27. 27.
    S.H. Chung, J.-Y. Park, S.-J. Park, W-S Chang, and I. Sohn: ISIJ Int., 2013, vol. 53, pp. 27-33.CrossRefGoogle Scholar
  28. 28.
    W. Loewenstein : Am. Min., 1954, vol. 39, pp. 92-6.Google Scholar
  29. 29.
    L. Pargamin, C.H.P. Lupis, and P.A. Flinn: Metall. Trans., 1972, vol. 3, pp.2093-105.CrossRefGoogle Scholar
  30. 30.
    S. Ueda, H. Koyo, T. Ikeda, Y. Kariya, and M. Maeda: ISIJ Int., 2000, vol. 40, pp. 739-43.CrossRefGoogle Scholar
  31. 31.
    F.A. Seifert, B.O. Mysen, and D. Virgo: Phys. Chem. Glasses, 1983, vol. 24, pp. 141-5.Google Scholar
  32. 32.
    A.N. Murashkevich, A.S. Lavitskaya, T.I. Barannikova, and I.M. Zharskii : J. Appl. Spectrosc., 2008, Vol. 75, pp.724-28.Google Scholar
  33. 33.
    J.H. Park and D.J. Min: J. Non-Cryst. Solids, 2004, vol. 337, pp. 150-6.CrossRefGoogle Scholar
  34. 34.
    J.H. Park, D.J. Min, and H.S. Song: Metall. Mater. Trans. B, 2004, vol. 35, pp. 269-75.CrossRefGoogle Scholar
  35. 35.
    J.H. Park, D.S. Kim, Y.D. Lee, H.S. Song, and D.J. Min: Molten Slags, Fluxes, and Salts, 2004, vol. 7, pp. 157–64.Google Scholar
  36. 36.
    G.W. Toop and C.S. Samis: Trans. AIME, 1962, vol. 224, pp. 878-87.Google Scholar
  37. 37.
    J.H. Park, D.J. Min, and H.S. Song: ISIJ Int., 2002, vol. 42, pp. 38-43.CrossRefGoogle Scholar
  38. 38.
    C. Feng, M.S. Chu, J. Tang, J. Qin, F. Li, and Z.G. Liu: Int. J. Miner. Metall. Mater, 2016, vol. 23, pp. 868-80.CrossRefGoogle Scholar
  39. 39.
    G.H. Zhamg, Q.G. Xue, and K.C. Chou: Ironmak. Steelmak., 2011, vol.38, pp.149-54.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2019

Authors and Affiliations

  1. 1.Materials Science and Engineering DepartmentYonsei UniversitySeoulSouth Korea

Personalised recommendations