Advertisement

Metallurgical and Materials Transactions B

, Volume 50, Issue 1, pp 357–366 | Cite as

Phase Equilibria in the TiO2-Rich Part of the TiO2-CaO-SiO2-10 Wt Pct Al2O3-5 Wt Pct MgO System at 1773 K

  • Zhen WangEmail author
  • Qingshan Zhu
  • Haoyan Sun
Article
  • 100 Downloads

Abstract

The phase equilibria of the TiO2-CaO-SiO2-10 wt pct Al2O3-5 wt pct MgO system in the TiO2-rich part were investigated experimentally at 1773 K using the high-temperature equilibration–quenching method and the electron probe microanalyses. Through this study, the isothermal section of the above system was obtained containing one liquidus region and five solid–liquid coexistence regions. The primary phase region of anosovite was not only found, but it is the optimal composition region that is most beneficial to the anosovite selective crystallization and separation. The phase diagram of the TiO2-CaO-SiO2-10 wt pct Al2O3-5 wt pct MgO system in the TiO2-rich corner at 1773 K has been established. The obtained phase diagram can provide reliable reference for the slag adjusting during vanadium-titanium magnetites smelting to make sure the resulting Ti-bearing slag can be upgraded using the selective crystallization and phase separation method.

Notes

Acknowledgments

The authors are grateful to financial support from the National Natural Science Foundation of China (Nos. 51404226 and 21736010).

References

  1. 1.
    J. Li,Z.T. Zhang and X.D. Wang: Ironmaking Steelmaking, 2012, vol. 6, pp. 414-18.CrossRefGoogle Scholar
  2. 2.
    J. Li,Z.T. Zhang,M. Zhang,M. Guo and X.D. Wang: Steel Res. Int., 2011, vol. 82, pp. 607-14.CrossRefGoogle Scholar
  3. 3.
    M.Y. Wang, L. Zhang,Z.T. Sui,X.W. Wang and Y.H. He: Ironmaking Steelmaking, 2009, vol. 36, pp. 388-92.CrossRefGoogle Scholar
  4. 4.
    L. Zhang,L.N. Zhang,M.Y. Wang,T.P. Lou,Z.T. Sui and J.S. Jang: J. Non-Cryst. Solids, 2006, vol. 352, pp. 123-29.CrossRefGoogle Scholar
  5. 5.
    A. Ohno and H.U. Ross: Can. Metall. Q., 1963, vol. 3, pp. 259-79.CrossRefGoogle Scholar
  6. 6.
    M.T. Gueguin: Chlorine, hydrochloric acid, US Patent 5063032, 1991.Google Scholar
  7. 7.
    J.P. Van Dyk and P.C. Pistorius: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 823-26.Google Scholar
  8. 8.
    K.S. Kamala, C.A. Thomas, M. Devabrata and A. Archana: Waste Manage. Res., 2006, vol. 24, pp. 74-79.CrossRefGoogle Scholar
  9. 9.
    X.D. Wang, Y.W. Mao, X.Y. Liu and Y.K. Zhu: J. Iron Steel Res., 1990, vol. 3, pp. 1-6.Google Scholar
  10. 10.
    P.X. Zhang, Z.T. Sui, D.M. Luo and J.R. Ma: Chin. J. Mater. Res., 1995, vol. 1, pp. 66-70.Google Scholar
  11. 11.
    X.R. Wu, L.S. Li and Y.C. Dong: ISIJ Int., 2007, vol. 3, pp. 402-07.CrossRefGoogle Scholar
  12. 12.
    Y.H. Li, T.P. Lou and Z.T. Sui: Chin. J. Nonferrous Met., 2000, vol. 5, pp. 719-22.Google Scholar
  13. 13.
    Z. Wang, X.W. Liu, L. Zhang and Q.S. Zhu: Trans. Indian Inst. Met., 2016, vol. 69, pp. 97-105.CrossRefGoogle Scholar
  14. 14.
    H.H. William and M.I. Douglas: Production of anosovite from titaniferous minerals, U.S. Patent 3502460, 1970.Google Scholar
  15. 15.
    Y.J. Wang, S.M. Wen, Q.C. Feng, J. Liu, and W.C. Ren: Trans. Nonferrous Met. Soc. China, 2016, vol. 26, pp. 2518-22.CrossRefGoogle Scholar
  16. 16.
    Y.J. Wang, Y.J. Xian, S.M. Wen, J.S. Deng and D.D. Wu: J. Alloys Comp., 2017, vol. 708, pp. 982–88.CrossRefGoogle Scholar
  17. 17.
    D. Xirouchakis, A. Smirnov, K. Woody, D.H. Lindsley and D.J. Andersen: Am. Mineral., 2002, vol. 87, pp. 658–67.CrossRefGoogle Scholar
  18. 18.
    S. Seim and L. Kolbeinsen: Heavy Minerals Conf., 2009, pp. 57–62.Google Scholar
  19. 19.
    B.J. Yan, X. Wang and Z.B. Yang: J. Alloys Comp., 2017, vol.695, pp. 3476-83.CrossRefGoogle Scholar
  20. 20.
    X. Goso, J. Nell and J. Petersen: Advances in Molten Slags, Fluxes, and Salts: 10th Int. Conf. Molten Slags, Fluxes and Salts, 2016, pp. 105–14.Google Scholar
  21. 21.
    B.J. Zhao, E. Jak and P.C. Hayes: J. Iron. Steel Res., 2009, vol. 16, pp. 1172-78.Google Scholar
  22. 22.
    E.F. Osborn and K.H. Gee: Bull. Earth Miner. Sciences Exp. Stn., 1969, vol. 85, pp. 57-80.Google Scholar
  23. 23.
    J.J. Shi, L.F. Sun, B. Zhang, X.Q. Liu, J.Y. Qiu, Z.Y. Wang and M.F. Jiang: Metal. Mater. Trans. B, 2016, vol. 47, pp. 425-33.CrossRefGoogle Scholar
  24. 24.
    J.J. Shi, L.F. Sun, J.Y. Qiu and M.F. Jiang: ISIJ Int., 2018, vol. 58, pp. 431-38.CrossRefGoogle Scholar
  25. 25.
    J.J. Shi, L.F. Sun, J.Y. Qiu and M.F. Jiang: J. Alloys Comp., 2017, vol. 722, pp. 25-32.CrossRefGoogle Scholar
  26. 26.
    I.P. Ratchev and G.R. Belton: 5th Int. Conf. Molten Slags, Fluxes and Salts, 1997, pp. 387–93.Google Scholar
  27. 27.
    W.T. Holmes, L.H. Banning and L.L. Brown: US Dept. of the Inter. Bur. Mines, 1968, vol. 1, pp. 1–21.Google Scholar
  28. 28.
    E. Jak, P.C. Hayes and H.G. Lee: Met. Mater., 1995, vol. 1, pp. 1-8.Google Scholar
  29. 29.
    Z. Wang, H.Y. Sun, L. Zhang and Q.S. Zhu: J. Alloys Comp., 2016, vol. 671, pp. 137-43.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2018

Authors and Affiliations

  1. 1.State Key Laboratory of Multiphase Complex Systems, Institute of Process EngineeringChinese Academy of SciencesBeijingChina
  2. 2.School of Chemical EngineeringUniversity of Chinese Academy of SciencesBeijingChina

Personalised recommendations