Digitalizing the Circular Economy
- 6k Downloads
Metallurgy is a key enabler of a circular economy (CE), its digitalization is the metallurgical Internet of Things (m-IoT). In short: Metallurgy is at the heart of a CE, as metals all have strong intrinsic recycling potentials. Process metallurgy, as a key enabler for a CE, will help much to deliver its goals. The first-principles models of process engineering help quantify the resource efficiency (RE) of the CE system, connecting all stakeholders via digitalization. This provides well-argued and first-principles environmental information to empower a tax paying consumer society, policy, legislators, and environmentalists. It provides the details of capital expenditure and operational expenditure estimates. Through this path, the opportunities and limits of a CE, recycling, and its technology can be estimated. The true boundaries of sustainability can be determined in addition to the techno-economic evaluation of RE. The integration of metallurgical reactor technology and systems digitally, not only on one site but linking different sites globally via hardware, is the basis for describing CE systems as dynamic feedback control loops, i.e., the m-IoT. It is the linkage of the global carrier metallurgical processing system infrastructure that maximizes the recovery of all minor and technology elements in its associated refining metallurgical infrastructure. This will be illustrated through the following: (1) System optimization models for multimetal metallurgical processing. These map large-scale m-IoT systems linked to computer-aided design tools of the original equipment manufacturers and then establish a recycling index through the quantification of RE. (2) Reactor optimization and industrial system solutions to realize the “CE (within a) Corporation—CEC,” realizing the CE of society. (3) Real-time measurement of ore and scrap properties in intelligent plant structures, linked to the modeling, simulation, and optimization of industrial extractive process metallurgical reactors and plants for both primary and secondary materials processing. (4) Big-data analysis and process control of industrial metallurgical systems, processes, and reactors by the application of, among others, artificial intelligence techniques and computer-aided engineering. (5) Minerals processing and process metallurgical theory, technology, simulation, and analytical tools, which are all key enablers of the CE. (6) Visualizing the results of all the tools used for estimating the RE of the CE system in a form that the consumer and general public can understand. (7) The smart integration of tools and methods that quantify RE and deliver sustainable solutions, named in this article as circular economy engineering. In view of space limitations, this message will be colored in by various publications also with students and colleagues, referring to (often commercial) software that acts as a conduit to capture and formalize the research of the large body of work in the literature by distinguished metallurgical engineers and researchers and realized in innovative industrial solutions. The author stands humbly on the shoulders of these developments and their distinguished developers. This award lecture article implicitly also refers to work done while working for Ausmelt (Australia), Outotec (Finland and Australia), Mintek (South Africa), and Anglo American Corporation (South Africa), honoring the many colleagues the author has worked with over the years.
KeywordsDiscrete Element Method Resource Efficiency Metallurgical Processing Circular Economy Process Metallurgy
Circular economy corporation
Circular economy engineering
Computational fluid dynamics
Discrete element methods
Design for recycling
Design for resource efficiency
Design for sustainability
End-of-life (of products)
Energy efficiency (as used to label products)
Inform resource efficiency
Internet of things
Knowledge Innovation Community of the EU’s EIT
Metallurgical internet of things
London Metal Exchange
Material flow analysis
Mineral liberation analysis
Original equipment manufacturer (for products)
Product centric recycling
Resource efficiency: reducing the total environmental impact of the production and consumption of goods and services, from raw material extraction to final use and disposal (UNEP, http://www.unep.org)
System integrated material production
Top submerged lance smelting technology (Ausmelt-Outotec and ISASMELT™)
United Nations Environmental Program (http://www.unep.org)
Web of Metals (and Web of Things)
The CE paradigm is high on the EU political agenda. One of the key drivers of a CE is metallurgy and recycling and the understanding of entropy in each of its facets. However, the present reality is that consumer products are complex, consisting of many technological and critical and functional materials/elements. These create complex recyclates with high entropy, which are rather challenging to recycle well and, in the process, decrease the entropy again. In addition, these products often have a short life span and are intensively produced and consumed, thus challenging the recovery of these metals from large volumes of complex recyclate mixtures. Controlling the entropy creation during collection is also of significant importance.
If consumer products were simple and constructed from one material only (and then most likely rather aesthetically unattractive as well as lacking all complex functionality required by the modern products), recyclates would obviously be 100 pct pure. CE would then be an easy and simplistic endeavor, as entropy creation is low. This is, however, not the reality of our society, which is driven by complex (consumer) products. If society would reduce drastically its consumption, the complicating issues of complex society in a CE would become trivial, as these can be mitigated; in fact, a CE would become irrelevant. Perhaps this may be the only way into the future.
This implies the variability of products and materials demands a dynamically agile metallurgical processing infrastructure to absorb and process into high-quality products as many combinations of complexly linked materials. Therefore, the metallurgical infrastructure is critical to control entropy creation. This means that for a CE to be realized, a high-tech adaptive base metal (with refining infrastructure), light metal, and steel metallurgical infrastructure, which interlinks all metallurgical processing industries, must be available and nurtured. This is system integrated metal and material production. Policy must acknowledge the key importance of the metallurgical infrastructure for achieving a CE.
Digitalizing and Innovating the CE
Product centric recycling (PCR) captures the full nonlinear effects of the recovery and losses of all materials, elements, strategy, technology, and critical raw materials on each other in addition to the contamination of the materials on each other. This is analogous to processing of complex polymetallic minerals and simultaneously ensuring that all elements, metals, and gangue are processed to economically valuable environmentally benign final products.
Analytical and simulation tools of minerals and metallurgical processing, such as artificial intelligence (AI), CAE, computer-aided design (CAD), computational fluid dynamics (CFD), discrete element methods (DEM), Design for Recycling (DfR), sustainability, RE and Design for Resource Efficiency (DfRE), Design for Sustainability (DfS), life-cycle assessment (LCA), flowsheeting, plant design, plant operation, plant service, process simulation, plant and system optimization, and thermodynamic and kinetic simulation, for the theoretical analysis of the CE system are key. The innovation lies in developing these tools within the context of CE for optimizing metallurgical systems and estimating their RE.[6, 7, 8, 9] Ten DfR Rules have been developed and explained in detail by Van Schaik and Reuter.
Mineralogy of recyclates are key to determine the recycling index (RI) of products and have to be quantified in such a manner that thermodynamic and physical properties can be derived for them. This makes it possible to use simulation[9, 10, 11] tools that can represent and optimize the complete CE system. The innovation, therefore, is to consider all properties of the recyclate particles and flows in the CE system simulation, including properties such as enthalpy, entropy and energy, alloy and material composition, conductivity, color, magnetic susceptibility, density, shape, odor, near-infrared properties, interlinkages of materials in scrap particles, brittleness, and ductility. These must all form part of the predictive simulation and optimization models.
Quantifying RE of the CE for both products and recycling in a manner that acknowledges the complexity of a PCR approach, which takes all materials of the consumer product (from the urban mine) into consideration. This emulates the geometallurgy applied to the analysis of complex minerals from a geological mine. The innovation is that primary and secondary processing is considered equivalent, ensuring that all materials are recovered, as is done in classical mineral processing. We have coined this PCR.
Real-time big-data approaches must be used to calibrate metallurgical, recycling, and CE system models that create a basis to optimize the processing chain while providing the necessary detail to calculate capital expenditure (CAPEX) and operational expenditure (OPEX) in addition to the environmental footprint. The innovation is that the simulation basis provides the true economic potential of the CE as it rigorously maps all recoveries, losses, and costs incurred due to the recovery and losses.[12,13] This simulation basis determines the baseline recovery rate and potential for specific products applying a PCR approach. This highlights the actions to take to innovate the CE system.
A real-time feedback loop to DfRE and DfR and CE system configurations for real-time grade monitoring of recyclates is required using suitable multisensors to estimate all possible contaminants and valuables in them, hence linking this to high-quality material and metal production processing.
Energy efficiency (EE) and material efficiency [material efficiency in industrial production focuses on the amount of a particular material needed to produce a particular product (UNEP, http://www.unep.org)],[14,15] of which the RI forms an important part, should be optimized as a function of product, recycling, and processing infrastructure design in order to fully reveal the opportunities and limits of the CE system.
Adaptive CE system approaches[10, 11, 12] must be the basis of innovative CE business models. These aid the design of a closed-loop system for material use preventing the loss of materials from the economy and into the environment including innovations to producer responsibility and new product ownership models. This provides a basis for developing innovative collection and organizational approaches to increase the amount of sorted End-of-Life (EoL) goods (thus unmixed and, therefore, controlling entropy), collected and reported EoL goods, and their subsequent reuse, recovery, and closed-loop recycling gleaning from the feedback from limits and critical issues in recycling learned from industry process simulation. The innovation is to minimize mixing and thus decrease entropy creation, the key parameter to be optimized.
Innovative and disruptive business models will need to be connected to material science and metallurgical process engineering, underpinning policy with physics and economics creating the field of CEE. This links, for example, CAE and process control platforms while creating RE economically viable CE solutions.
Engage end users (consumers and businesses) in both the design of collection and in the testing of potential approaches. Their acceptance to recycled and reused products can be increased, especially also if they are informed in a simple manner via visual methods to show the effect on RE of their choices.
An Adaptive and Agile Metallurgical Processing Infrastructure
Therefore, the key challenge is to understand the role and digitalization of an adaptive infrastructure and process technology to innovate the true potential of CE thinking. Understanding the agile adaptive and flexible multimetal process metallurgical infrastructure of the m-IoT is one of the main underlying topics of this article. Digitalizing it by linking all stakeholders is the vehicle. Note that the steel industry has made major advances in system integration of their various high-tech fully integrated technologies, which supply high-quality steels to high-end users. This is similar for the high-tech integration of copper smelters producing a multitude of high-tech metals using sophisticated refining infrastructure. M-IoT, however, refers to a level higher, i.e., linking steel, aluminum, and base metal production facilities forming the complex WoM.[4,7] The WoM permits the capture of as many metals as possible that enter the metal production system through minerals as well as EoL products and, therefore, has the ability to maximize RE through its versatility, agility, and flexibility in metallurgy. System agility is a keyword for realizing CE.
Using the optimization of minerals processing flotation plants of the author as a starting point for system optimization in this CE centric discussion, the complex interconnected WoM[3,4,7] will be shown as an example of industrial ecology (IE) to quantify the complexity of the WoM. Therefore, digitalizing the complexity of the WoM, which is an integral part of IE in terms of PCR and metallurgical processing, will be the basis for defining m-IoT. This is one of the backbones for realizing the m-IoT, which will be a key enabling driver of the CE system.
Is the m-IoT and Its Inherent Digitalization a Key Enabler of the CE?
In this article, that reflects my award lecture, I will limit myself, in view of space, to color in the message with various publications I have been involved in. Having said this, this article is respectfully dedicated to the numerous great metallurgists on whose shoulders I stand. I use the numerous software tools and thus implicitly their innovative creators and all those that have breathed life into them through their research, data, methods, etc. as main references to the message. These are, in fact, the true fabric and platforms of CEE. In the Acknowledgments, I name mentors and colleagues who have had the biggest impact on my path.
Reading through this article, please keep in mind the statement: “Process metallurgy is a key enabler for a CE and will help much to deliver its noble goals through digitalizing the complete WoM.” The questions thus to ask are as follows: Is the previous statement in itallics true? Can industrialization, Mother Earth, and nature be harmonized to achieve “sustainability” in our present consumer society? What are the other key factors that play a role in enabling CE? Can entropy be quantified for all steps in the CE system to understand its true (sometimes rather obvious) limitations?
In summary: Understanding RE within a CE paradigm, therefore, is key for sustainability, revealing the true opportunities and limits crucial for a sustainable future. This contribution implicitly shows that we should refrain from hiding behind sweet sounding ideologies, such as cradle to cradle, that neglect limiting rigorous physics details and continue business as usual, while conveniently forgetting the hard facts of theory and industrial practice that process metallurgy so beautifully reveals. The frank and clear analysis of the true potential of CE through the application of the discussed CEE tools and their techno-economic reality may possibly produce inconvenient answers for the future, hence showing us how many fewer resources we will have to consume in view of meeting climate change goals. However, understanding and quantifying its true potential in addition to its philosophical depth will deliver the gifts of CE thinking and sustainable systems redesign.
Theoretical Basis of a CE
Process metallurgy, its metallurgical processing systems, and its infrastructure are key enablers of a CE. They are, in fact, some of the key foundations also for understanding entropy creation in the CE system. Various aspects of this network of metallurgical processing will be depicted in this section in the context that forms the fabric of m-IoT.
Geological and Urban Mines
Often the economic, ecological, and social values of the materials in modern products are determined by their “in-use value.” Only functionality, aesthetics, safety, durability, and reduced energy consumption are considered. While more value is being given presently to the recyclability of products (and their contained materials), there is a lot of work to be done to empower the user to make informed decisions about their use. Showing the user in simple ways what products have the lowest environmental and social impacts is of paramount importance to us process engineers.
Advances have been made in geometallurgy, but metallurgical process modeling needs considerable innovation to be truly dynamic and predictive, linking all aspects of Figure 1 in real-time. Linking product design to metal and material losses from the system is the true innovation and challenge. However, this requires considerable understanding of process metallurgy; not only fundamental depth is required of entropy, e.g., simulation, digitalization, and process control, but also the industry perspective of a design engineer will contribute to the digitalized link and the practicalities of metallurgical processing technology.
Tools to Quantify RE
System engineering[10,15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32]: Understanding the complex interlinkage of metals and materials in the complex WoM is crucial for optimizing RE. The future availability of materials and technology elements feeding into sustainable products and society are of great interest to realize the CE. System engineering tools, both steady state and dynamic modeling approaches are significant tools to understand the WoM.
System dynamics[13,15,25,29]: Different product lifetimes (from building materials to consumer products), economics and metal prices, availability and agility of metallurgical infrastructure, substitution, legislation, geographical aspects, new products and their functionalities, etc. all have a profound impact on the dynamics of the flows of metals and materials. Their geological and functional linkages connect these dynamics in the products as well as in the metallurgical reactors. Thus, crucial in understanding the WoM is also its dynamics, not only on a metal-by-metal basis (thus material centric) but above all also on a mineral and product centric level that recognizes complex “mineralogy” in its full thermodynamic complexity.
Process control[28,30,33]: Modeling system dynamics requires a deep knowledge of process control. Not only is this of crucial importance for understanding the feedback loops of the CE recycling systems, it is also of key importance for optimizing, controlling, and simulating metallurgical processing reactors in real time. This permits optimizing RE to the limits of what is thermodynamically and thus economically possible. This brings into consideration the CEE toolbox, which includes thermodynamics, kinetics, mass and heat transfer, particle flow, environmental impact analysis, and exergy analysis, and links it to the bigger picture of the CE system. This will enable real-time RE estimation of the CE system, a key area of development for the future, especially to optimize CE and inform the consumer and society at large of its impact.
Minerals and metallurgical process engineering[34, 35, 36, 37, 38]: It is key to be able to optimally operate each of the unit operations in the feedback loop of Figure 1 in order to maximally recover all metals and materials and, thus, to understand entropy. A keen understanding of particle properties and thus minerals processing is a key aspect. Understanding the system of recycling and metal production establishes a detailed overview of all the intricacies of m-IoT. This enables a realistic first-principles description of all the intricate flows for metallurgical processing using various thermodynamic tools (thus entropy) and recycling technology subject to market conditions.
Knowledge of product design: Understanding the relationship between product design, process metallurgy, and recycling is vitally important to bridge these presently still essentially key missing links. CAE and CAD must be linked to recycling to be able to predict metal and energy recovery and waste creation/prevention. Product functionality dictates how and which materials are connected to each other, which may and often does challenge the recovery of all elements. Thus, the dictum, “One wins some metals and therefore loses others subject to the laws of physics but dictated by the product designer,” should always be kept in mind, as it is always different depending on the mix of materials.
Legislation and knowledge transfer: This is crucial for CE. Informing and teaching the consumer the complexity of the modern consumer products while visualizing in simple ways the effect and limits of the insatiable demands of consumerism on the RE of a CE.
Societal and behavioral impact: Understanding the aspects that affect, for example, consumer purchasing behavior, collection, and presorting of EoL products, which all impact the entropy at the entry point at EoL, for instance.
Quantifying the RE of a CE
Opportunities and limits of a CE: With detailed and fundamentally based data on all impacts, CAPEX and OPEX can be derived to determine the technological and related economic limits of the CE system.
Inform legislation and societal impact[5,11]: The rigorous CEE approach provides a basis for quantifying the RE of the CE system on a process engineering first-principles basis. This provides the original equipment manufacturers (OEMs) with a fundamental basis to supply RE products to society while understanding their impact on the CE system. Linking CEE to the formulation of environmental legislation as well as disruptive CE business models is of critical importance and innovation.
Inform resource efficiency (iRE) and knowledge transfer[5,11]: The development of innovative applications (apps) and visualizing the results of complex simulation models in simple-to-understand visualizations is crucial to empower society to innovate informing RE.
Environmental impact[26,40,41] and RI: M-IoT is a detailed process metallurgical first-principles approach, which enables the integration of methodologies such as LCA and simulation-based RI calculation into CAE and CAD. The results provide the consumer with transparent information on products detailing the impacts of all stakeholders depicted in Figure 1.
The “sustainable” m-IoT of the CE system depicted by Figures 1 and 2 should be in balance with nature. All losses and flows to nature should be understood well in their full mineralogical and compositional detail to ensure that their impact can be evaluated and thus minimized or even best stopped as far as this is possible.
Metallurgical Internet of Things
In the present time and age, all conducted research and development should quantify its societal and environmental impact. It must be pitched within the bigger sustainability picture; thus, its social and environmental consequences must be made visible. This is most certainly valid for materials research; thus, environmental and societal impact for newly designed materials within consumer products should be known in the CE paradigm. A larger systemic picture should always be at hand to evaluate the consequences of the actions of engineers, material scientists, OEMs, and society throughout the life of the product. The impact of contained materials and associated embodied energy must be quantified and made known to the consumer. M-IoT will be the fundamental basis for this discussion.
Definition of m-IoT
In order to be able to achieve the quantification and the digitalization of the m-IoT, various research and development will be required, as reflected by Pillars 1 through 3 in Figure 4, all embedded and embraced in sustainability (social, economic, and environmental). Also of importance is the development of analysis tools and sensors that can be used to calibrate the unit models from industrial materials, recyclates, residues, scrap, etc. This is where big data comes into play—from a large body of poorly defined data, these unit operation models have to be calibrated. Figures 1 and 2 give some indication of the type of mineralogy data one is speaking of, which are hardly measureable, presently with large variances for many of the defining properties.
Realizing a CE and Informing Society
The following sections provide a brief overview of what each of the pillars in Figure 5 could mean, coloring it in with the author’s experience and work in academia and industry.
Pillar 1: Sustainable Systems and System Modeling
Product design has a crucial influence on the closure of the material cycles and the efficient use of resources. Acknowledging that products have complex “mineralogies” due to functionality reasons, fundamentally based system modeling is a key tool to evaluate the performance of the complex interlinked metal cycles referred to as the WoM. These are indispensable to provide information on the impact of consumer and technology behavior while keeping policy realistic and agile. These system models not only provide an important input to the economic dimension of sustainability but, perhaps more importantly, to the social dimension. Furthermore, these system models are the basis quantifying the RE of m-IoT and, hence, provide an important input to the environmental dimension of sustainability. Minerals processing plant simulation and optimization carry a wealth of knowledge that is applied with adaptation to the recycling field within the CE.
Multimetal flow networks or, in other words, the WoM[6,46] are complex and highly connected and not simulated easily due to the inherent complex nonlinear thermodynamics, kinetics, and transfer processes in metallurgical reactors. For this reason, the individual metal flows can never be considered separately as material flow analysis (MFA) does. The complex mixtures of metals and materials entering metallurgical reactors via minerals as well as products through their complex functional material combinations create these complexities in metallurgical processing.
A first attempt has been made to simulate this complexity in detail. It was proven, for example, that it could be quite problematic to sustain the intricate interconnected metal cycle system if any metal production system is removed from the intricate WoM, i.e., the primary and secondary metal production system. Of importance is also maintaining tacit process operational knowledge within the metallurgical industry—the knowledge that often makes it possible for operations to survive, run safely, be environmentally friendly, etc. This knowledge provides the content and substance of m-IoT; if the system is destroyed, for example, by legislation, the CE system will most likely collapse within a region. Obviously, this system will then migrate to places where full metallurgical processing infrastructures are available that cover the stakeholders and complexity shown in Figures 1 and 2.
The Metal Wheel was developed to show in a simple visual way the intricacies of process metallurgy of primary ores to nonmetallurgists. These often tend to analyze metallurgical systems without including mineralogy or thermodynamics (thus entropy) in their MFA tools. The wheel shows that the minerals of the carrier commodity metals are unique mixes of inorganic compounds explained by geochemistry. Their treatment is governed by methodologies that fall under the umbrella of geometallurgy. This estimates which elements can be economically recovered, which are lost (the gangue), and which have to be collected and treated well due to their environmental impacts. The wheel was also intended to visualize the fact that their respective processing infrastructures are, in fact, the backbone of a CE. In other words, removing any one of the carrier metal infrastructures from the CE system will collapse it. It must be noted that the metallurgical infrastructure is a unique blend of process metallurgical technical as well as tacit knowledge that needs to be preserved lest it goes lost and, therefore, also the capability of the CE system to agilely adjust and evolve itself. Therefore, eliminating or disrupting the production of one element will have a ripple and knock-on effect over all connected carrier elements as well as all associated minor elements (often with considerable economic value) within the m-IoT.[6, 7, 8, 9, 10, 11] It would be self-evident, therefore, that each metal and element within the WoM has a unique and delicate position, which all together will make the CE an economic reality.
Figure 8 visualizes this complex interconnected system though a Simulink simulation model. It simulates the complex WoM that links the depth of metallurgical process engineering and reactor technology of the 10 linked metals. In a transparent scalable approach, the dynamics of process metallurgy have been linked to the tools that quantify the environmental performance of the global anthropogenic system of the flow of the depicted 10 metals. Thus, all mutual dynamic and nonlinear effects are quantified and can be investigated based on the thermodynamically driven processes that occur in each reactor.
The complex interactions between the various reactors for the production of the various metals can only be produced with extensive industrial metallurgical process knowledge. Thus, the complex web of interactions can only be created in such a model if process metallurgy is known.
Complexity of the CE
There is the thinking that, by automatic sorting, improved recycling can be achieved. Considering Figure 7, it would be clear that, due to functional connections of materials, no sorting technology will ever be able to improve the RE of the recycling of these materials. Materials are together for functionality reasons, in many cases so intimately linked that only chemical separation is possible. Then thermodynamics comes into play dictating simply “You will win some elements and lose others, depending on the thermodynamics, technology, and economics.”
“Designing” Minerals—The Role of the Product Designer
The geometallurgy of minerals is determined by the complexity of natural minerals. The metallurgical infrastructure for specific minerals has evolved and optimized itself around ore mineralogy for many years. Think of all the carrier metal infrastructures that presently supply metals, along with the associated technological and other critical as well as nonvaluable metals.
Product design and the product’s functionality affect the behavior of complexly linked functional materials during shredding, cutting, or dismantling. Figure 7 shows different degrees of liberation, enveloping or similar; it is self-evident that the ultimate degree of metal and material recovery from these scrap particles is directly related to their complexity and the number of materials and metals that can be found in the large number of different scrap particles that originate from an EoL product. There is a chemical geochemical reason for minerals to be structured in the way they are; this is not the case for consumer “designer” minerals. Their complexity and functionality determines what metals and materials can be recovered and recycled back into the same products and what the losses from the recycling chain will be, as depicted by Figure 1 and Figure 2. In fact, the designer and the functionality thus determine the entropy state of the product and thus how much energy must be returned into the system to undo the entropy creation by the designer and product functionality.
To recover the metals from such complexity requires complexly linked metallurgical infrastructure that can recover as many as possible metals, as shown by Figure 7. This determines the RE of the CE system and also reveals what critical metallurgical infrastructure has to be available to act agilely to capture as many as possible metals and materials from this complex WoM. Therefore, it is key that the metallurgical infrastructure must continue to develop and evolve in order to capture as many as possible materials and metals in the WoM, playing its key enabling role in the CE system.
Minerals Processing and Process Metallurgy—The Roots of CE System Models
Commercial CE systems, as shown by Figures 1, 2 and 7, never create pure material streams from the various materials from end-of-life vehicles and EoL consumer goods. It would be self-evident that 100 pct recycling rates are never achieved during physical separation nor 100 pct metal recovery during metallurgical processing. These facts are simply dictated by separation physics, thermodynamics, kinetics, stochastic processes, measurements, sampling and sample analysis distributions, transfer processes, technology, entropy creation, product distributions, types, etc. These aspects all affect the quality of the recycling streams, as depicted by Figures 1, 2, and 7, which determine the mineral classes (thus the combination of materials in the product and thus in the scrap), particle size distribution (of scrap and particles), and degree of liberation, as shown by Figure 7. These parameters affect the physical separation efficiency, metallurgy, and energy recovery, which all as a result determine the quality and economic value of the recycling products in the CE system.
It was explained earlier that design determines the quality of recyclates and thus the ultimate recycling rate of a product, as shown by Figure 2. It will be a key innovation to have recycling tools available that are linked via CAE and CAD software tools that can predict recyclability of a product during design. All materials and metals in the product have to be accounted for when estimating the RI of products. At the same time, the social and environmental value of the materials applied in the product are revealed, thus informing and empowering the consumer to make decisions when purchasing these goods.
Therefore, it is a key innovation for a CE to simulate the complete system by dedicated tools that include minerals processing and metallurgical depth.[13,26,32] These quantify RE and thus estimate the limits of the CE system and thus of the CE paradigm. This demands a deep understanding of first-principles knowledge of recycling processes as alluded to previously. It requires continuous further innovation in pyro- and hydrometallurgical systems and their agility so that it can deal with the ever-increasing complexity of modern consumer products. The mentioned tools include this depth.
Optimization and Quantification of the CE System
Predicting the RI of EoL products during the design stage requires the simulation of recycling on a fundamental basis, as noted previously. Figure 7 shows that if RI values are of any value, their underlying theory must consider and embrace the following: (i) material composition, i.e., both physical and chemical; (ii) the calorific values of the (intermediate) recycling streams based on their composition and mineralogy; (iii) material and mineral classes; (iv) particle size classes; (v) liberation and agglomeration classes of scrap (Figure 7);[39, 40, 41] (vi) the economic value of intermediate streams based on metal values;[9,11] (vii) separation physics as well as metallurgical process thermodynamics;[9,11] (viii) losses and emissions and their mineralogy; (ix) harmonization of processing infrastructure with changing product design;[4,9] and (x) distributed and dynamic properties of functional materials in present product designs simultaneously anticipating future designs.[47, 48, 49] Figure 9 provides a detailed flow sheet of an example of a recycling optimization model, from which it is clear that the complete flow sheet of recycling is always considered. Thus, physical separation and process metallurgy are always linked. Most recycling flow sheets in environmental analysis do not consider or simplify this so important aspect.
With the knowledge of minerals processing and from observation of particles created in recycling systems (Figures 1, 2, and 7), we can define the fundamental basis of the CE systems in terms of (i) mineral classes, (ii) particle size classes, (iii) liberation classes (LCs), (iv) agglomeration classes, (v) the link between these, and (vi) the definition of the minerals for a consumer product through a sequence of publications.[4,15,39]
Through this, the dynamic nature of CE systems could be investigated, showing the effect of time delays in the system on recycling rate as well as highly distributed properties. Subsequently, we could quantify the fundamental limits of RE in relationship to product design.
Liberation, physical, and chemical separations are key to the production of pure recyclates within the recycling system.
Furthermore, LCA methodology was developed to evaluate the environmental impact of the performance of larger systems and linked to HSC Sim.
The effect of particle size reduction and liberation on the recycling rate of products was investigated theoretically and industrially[12,15] to show what the key cause was for losses in the recycling system and, hence, the reason for low recycling rates and the key limitation and challenge for a CE system. Also, linking design and liberation of materials during shredding to the recycling models made it possible to estimate recycling rates as a function of product design.
Extractive metallurgy designs are always underpinned by detailed process flowsheeting and simulation for evaluating alternative solutions. However, most flow sheets in environmental analysis do not consider or simplify the preceding detail. We considered these aspects, for example, in detail for lead,[43,47,50] zinc,[43,47,50] and copper flow sheets,[11,42] including their optimization and industrial understanding.
The quality of the recyclate streams ultimately determines in which processing steps of the complex flow sheet (Figure 9) these materials can be economically processed to metals, high-quality materials, or energy.
To assist the product designer, the Design Wheel[7,12] (Figure 6) was developed to reflect the (in)compatibility of material combinations in the recyclates and their effect on the RI. The colors in the wheel help to visualize the imperfect liberation or separation. This compatibility is based on the material combination matrix, which in turn is based on the thermodynamics and kinetics of metallurgical processing. This explains simply why, for example, copper and gold connected to steel will dissolve in steel, but since copper and gold are more noble than steel, these cannot be removed from steel during steelmaking.
Linking Product Design to Recycling
Figure 9 depicts a system for EoL products (e.g., vehicles passing through a shredder) recycling and a complex optimization model for doing so. Figure 1, 2, 6, and 7 depict recyclate particles after shredding/cutting/sorting, the complexity of which determines their recyclability, among others, due their quality and resulting economic value.[4,9] The economic value of each material and metal, determined by both the London Metal Exchange (LME) price and the mass of each metal and material in the product (and thus in scrap particles), is a key driver in realizing the CE system. Undesired material combinations and contaminations diminish economic value (if exceeding permitted concentrations, alloy specifications, etc.) and hence recyclability, as these could potentially dissolve in metals, appear in flue dusts, and report to slag, slimes, residues, sludges, etc. Simple tools such as the metal compatibility tables as well as the Metal Wheel were developed in the late 1990s and early 2000s[6,7,9] for design engineers to visualize these complexities. Furthermore, product complexity creates complex residue streams or undesired possibly harmful emissions that may not be recoverable in the current system and process metallurgical infrastructure. As a consequence, these residues will have to be stored in well-contained ponds so as to be possibly recovered in the future when the economics are better, which may also imply that uses may have been found for these presently invaluable elements.
Simulation and optimization models, of which the flow sheet depicted by Figure 9 is an example, are imperative to evaluate all the complex interactions that determine economic viability and environmental impact. However, these models are often too complex to link to CAD directly. For this reason, simpler approaches were developed, e.g., fuzzy logic models, that learn and map these complex models from the numerical results of the recycling simulation and optimization models. As for the simulation models, these fuzzy logic models can be linked to CAE and CAD software, and they can also be integrated into LCA tools[11,26] to help design RE efficient products. A key innovation, therefore, is to link product design to simulation and to environmental impact to ensure the RE of the CE system can be quantified. This helps minimize the loss of valuable materials and metals from the CE system as well as prevents the decrease of both qualities of recyclates and recycling rates of products.
Theoretical Basis for the m-IoT
Pillar 2—Phenomena, Process Modeling, and Simulation
Closing the material and metal cycle is not possible without a thorough knowledge of the technology (and its theory) that creates and recycles the metals and materials used in consumer products. Not only does this require a good fundamental description and understanding of the technology, but it also requires sufficient measured data to calibrate models and also to predict environmental performance. This section shows that the principles of process engineering have an important and necessary role to play within any sustainability discussion. It is also crucial to understand the bigger system in which this technology is residing of which process control is a fundamental ingredient. High-temperature process reactors will be the focus of the discussion, since it is conjectured that these are crucial for closure of the material cycle. Process metallurgical reactors facilitate sustainability in metals processing and are key to a CE paradigm; in fact, metallurgical reactors and metallurgy are the true “closers” of the loops in the CE system.
Calibration of Models, Data Driven Modeling—Big-Data and System Analysis
EoL consumer goods are a valuable resource of metals. Processing these is key to recycling and “closing” of the metal and material cycles, contributing to the sustainability of the CE system. Rapidly changing metal combinations in consumer products challenge the current boundaries of thermodynamics and kinetics and their use to recover these metals from postconsumer products in metallurgical reactors, as shown by Figure 8. Figure 8 shows that the distribution behavior of key elements has a vital impact on where these metals report in the CE system either as products or residues. As explained, optimizing the CE system requires detailed knowledge and control of process metallurgical reactors. Calibrating process models requires detailed sampling and real-time analysis of data. Classical sampling theory and statistically based data reconciliation play an extremely important part when collecting data, closing mass balances over unit operations, plants, and systems, as depicted by Figures 1, 2, and 8 through 10. The reconciled data may then be used to calibrate the simulation, optimization, and dynamic models.[51, 52, 53, 54, 55,57, 58, 59] The key is linking industrial compositional data of the EoL products, their separation efficiency in separation processes, their liberation, and their quality (or grade) to their behavior in process metallurgical reactors.
System optimization models, if they have any value, require detailed industrial calibration data on the reactor and unit operation level. If the models can be calibrated by industrial data, these obviously provide a theoretical basis for detailed collection of process data as well as product data defining them in detailed mineralogical granularity. The preferred basis for data collection applies data reconciliation, and the corresponding sample and sampling statistics, when auditing an industrial plant, are underpinned by sampling theory. In addition, the simulation models support system optimization models on the basis of rigorous mass and energy balances.
Reducing large bodies of real-time and other data from the reactor to the system level requires significant data reduction techniques that then can be applied to calibrate simulation models and flow sheets. Numerous software tools exist[51, 52, 53, 54] that can perform the tasks of data acquisition and reconciliation and then use these reconciled data to optimize processes, furnaces, and complete systems. Platforms such as the PI System from OSIsoft have gone a long way toward harmonizing real-time data acquisition with complex system models to optimize complete plants. This requires that data have a unified format that is scalable, i.e., that permits the mineralogy of ores, minerals, consumer goods, etc. to be quantified in terms of compositional and material associations (i.e., geometallurgy), and linked to the thermodynamic data formats of process simulators. Furthermore, for the data to be usable in simulation models that define the system, as depicted by Figures 1 and 2, these data should have the same time stamp inclusive of time delays, as reflected by Figure 3. If these data from the geological and urban mines (Figure 1) are compatible, they can be usefully linked and used to optimize metallurgical processing systems.
Use reconciled data for TSL, submerged arc (Si, FeSi, FeCr, FeMn, CaC2),[59,62] salt slag aluminum recycling, chemical waste incineration, and blast furnaces (among others) to create dynamic models linked to thermodynamics (captured in neural net functions) to predict metal recovery, heat loss, matte grades, etc. as well as for environmental impact assessment.
- (2)The use of AI and big-data analysis techniques for the modeling of ill-defined metallurgical reactors has been ongoing since the early 1990s,[58,59] and various platforms have evolved that apply these practices.[51,52,55] These techniques provide valuable insights into technology and permits to extend help in their optimization when using well-conditioned real-time data; e.g., neural net estimation and capture of thermodynamics relationships data were published for the first time in this journal in 1992, as were the data on approximating kinetics with neural nets in 1993,[57,58,64] followed by various applications such as reactor diagnosis and optimization, as depicted by Figure 11.
Metallurgical Reactors—Closers of the Metal and Material Cycles
Metallurgical reactors play a key role in closing the material cycle.[4,10,11] For these reactors to optimally do this, a thorough knowledge of metallurgical process engineering and technology as well as the associated knowledge of thermodynamics is required. At the same time, process control is a key to achieving optimal reactor performance, minimal energy consumption, minimal residue creation, and maximal production of metal.
Understanding Scrap Particles in Their Full Three-Dimensional Multimaterial Complexity
Particles play an important part in recycling systems.[9, 10, 11, 12, 13] Particle behavior and, hence, controlling their destinations during physical separation are of extreme importance for realizing a CE to maximize RE. Equally important is the behavior of particles and their interaction with gaseous, aqueous, and molten phases in metallurgical reactors,[63,73] aspects that are simulated by DEM in combination with CFD methods—various examples exist in metallurgy including for blast furnaces, fluidized bed reactors, and rotary kilns, to mention but a few. This is an important field of development that will further enhance the understanding and maximization of RE within the CE system. CAE tools, such as modeFRONTIER, already go a long way toward integrating, for example, flowsheeting tools, CAD, DEM, and CFD under the umbrella of CAE through which optimization of reactors, products, and systems, for example, can be done. These types of platforms will increasingly be used, which also include LCA environmental indicators in objective functions for the optimization of systems.
Value of These Models and Approaches?
With all the detail of the reactor technology discussed previously, as well as a thorough understanding of the thermodynamics, kinetics, and technology of processing including all the stakeholders reflected by Figure 15, it should be possible to create sufficiently accurate system models that predict the recycling performance of the complete CE system. However, all these methods are as good as their calibration and comparison with the real world, and these thus can be used to optimize reactors, processes, and systems. Often impressive colorful pictures and MFA results are produced through the use of these methods, though it is still rather challenging to create suitable DfR and DfS tools as well as quantification of RE that reflect reality well. If all the preceding information is known and integrated within the models with a clear interaction between model builders and industrial application, significant improvements will be achieved.
Pillar—Measurement, Process Control, and Apps
Quantification of the RE of the CE system is key in driving its innovation and its success. The required digitalization to link the WoM together into the m-IoT is a unique opportunity of the metallurgical processing industry to lead the IoT paradigm for a CE. It has been shown that various simulation techniques exist connecting product design to process metallurgy, but these still need work. This section will discuss this aspect and also suggest developing easy-to-use computer applications (apps for various IT platforms) that can be used by the general public to access RE information easily to assess and understand its personal footprint.
Estimating All the Properties of Complex Materials in Real Time
Process control and system dynamics are key aspects of understanding CE systems. The previous sections discuss various dynamic modeling methods, both through simulation and via data-driven approaches. In the context of CE, this section will elaborate briefly on some key aspects that are of importance to realizing and quantifying the m-IoT and, hence, delivering the detail and platform from which innovative CE business models can be developed.
Physical separation systems for sorting particles through real-time analysis have already evolved significantly. Usually, these industrial systems act only on one property and sort accordingly, e.g., by color, near infrared, magnetic, or eddy. The innovation in the future will be to use multisensors and in real-time feed information to calibrate simulation models that track particles[8,11,26] through complete recycling flow sheets. Proxy measurements done with three-dimensional (3-D) X-ray tomography as well as mineral liberation analysis (MLA)[76,77] will help to link multimaterial real-time measurements to the calibration of recycling and system simulation models. This will capture the mineralogies of ores as well as scrap, hence enabling the linking of all the stakeholders in Figure 1[4,9,10] on a fundamental basis.
The key innovation that this brings is that it links recycling to product design via a detailed analysis and simulation to the prediction of metal recovery during metallurgical processing. This subsequently permits a detailed calculation of RE and thus the loss of materials, elements, alloys, etc. to streams of low economic value. Included is all the statistical information that documents standard deviations, averages, etc. all as a function of time.
It was proposed for the optimization of flotation plants that a flexible minerals processing plant structure could help to optimize grade and recovery. This means that the processing plant can in an agile manner adapt to changing feed conditions and ore grades, not only by changing flotation and grinding conditions, but also through rerouting streams to different unit operations. This is also implicitly what the optimization of complete recycling systems suggests, as depicted by the optimization models reflected by Figure 9. A key innovation of the future, similar to what was done for flotation, is to link optimization models with simulation models to maximize RE by optimal routing of EoL products, scrap, materials, residues, etc. to appropriate metal production and refining infrastructure, as shown by Figure 9.
Informing and Empowering Society
Metallurgical systems are complex and simulation models can become rather complicated and detailed and in some cases so detailed that they have no practical value nor can they be easily calibrated and tuned with real-time data. Obviously, these are not easy to use and even more challenging for society to understand, but these define the basis of RE and cannot be simplified to produce trivial academic solutions.
It is crucial for the metallurgical industry to picture its complexity in simple-to-understand visualizations.[11,82] Figure 6 shows such a visualization that could inform the consumer of the recyclability of products showing the recovery of all elements (weight averaged) as a RI for the complete cycle shown by Figure 1. It is also useful for the product designer to visualize the effect of redesigns of a product and their effect on recycling, providing a rigorous basis for DfR, as often the complexity of metallurgy is not fully understood by everyone.
Presently, the CE discussion is often still rather general and neglects the detailed discussion of true losses from the system due to complexity. The document by the MacArthur Foundation is such an example, in which figures similar to Figure 15 are depicted but do not precisely detail all the losses shown in Figure 15, therefore risking oversimplification of the benefits of a CE. The losses, not clearly shown and discussed by the MacArthur Foundation, will all have to be managed well within techno-economic boundaries to maximize the RE of a CE for society.
Engineering has always had a strong societal role and impact. The present global situation requires more than ever a leading role from engineers by the application of their unique design skills and engineering approach to the creation of sustainable technologies and systems; or, on the other hand, to provide the tools to analyze systems to reveal the limits of the CE and what technology cannot provide and perhaps only human behavior can. Their strong practical and techno-economic based problem solving abilities are a key ingredient of this analysis. Legislation plays an important role in recycling, environmental control, etc., contributing to rendering our future more sustainable. Engineers can contribute significantly to this debate, enhancing the (fundamental) quality of the legislation, identifying its flaws, and subsequently assisting in the creation of legislation that inherently contributes to and enhances sustainability.
Criticality of the Metallurgical Processing Infrastructure
Various approaches to questions of crucial importance to the quantification of RE of the CE system have been discussed in this article. Various industries are taking these approaches on board to ensure among others that sustainability criteria are met and that industries are good global citizens. These approaches, however, also show the challenges and limitations and pose difficult and complex questions regarding the achievability of a CE. With the advanced tools alluded to in this article and industrial calibration data, however, useful simulation and business models can be developed; therefore, the potential and risks of a CE should be explored and quantified to minimize the losses shown in Figures 1 and 15. The criticality of maintaining a metallurgical processing infrastructure is key to keeping the WoM agile.
The importance of deep understanding (both tacit and theoretical) of the process metallurgical technology within the CE system is highlighted as a key enabler. It is crucial for engineers to be part of this legislative, policy, and political discussion, bringing into it the rigorous process of the engineering and technological method. A further objective is for engineers to keep society informed so that clarity exists and can be communicated on a rigorous techno-economic basis. Thus, process metallurgists play an important role in this public dialogue. However, process metallurgy should visualize its results in a manner that educates the public; therefore, metallurgists should be playing a leading role in this dialogue, as reflected by Figure 6.
It is clear that recycling plays a crucial part in the complete resource cycle of a CE, as it increases RE through high-tech sorting and metallurgy (Figure 8). As recycling technology comes of age, it will move in general to a more sophisticated sorting technology and digitalization, as depicted by Figure 14. As computing power increases and sensors become more sophisticated, so will the ability to deal with extremely large bodies of data, which, for example, will characterize the multitude of particles in scrap and all their material properties. Complexity, however, can also mitigate the possibilities of these developments.
Circular Economy Corporation
It goes without saying that corporations that understand the complete material and metal cycle will remain viable in the future and help to drive the sustainability path and also show the importance of the metallurgical industry. This implies that corporations that have as their mission vision and courage to engage in the complete cycle, as depicted in Figs. 1 and 2, will advance sustainability and will be the future leaders due to among others their sophisticated and agile multibase metal and minor metallurgical processing flow sheets. Resource corporations may in the short term be more profitable through a linear product portfolio, i.e., mine-to-mill, dig-and-ship, or oil well-to-refinery, which may be and probably is inherently unsustainable in the long run. Having said that, the CE paradigm opens up great opportunity; it opens up the paradigm “Circular Economy Corporation (CEC).” Acknowledging the fact that metals and their associated WoM are probably presently the only anthropogenic system that can hesitantly be labeled sustainable opens attractive perspectives for resource and metal producing corporations. A rethink and shift in resource and recycling metal and alloy producing corporation vision will contribute significantly to ensuring a sustainable future for the planet.
Resource, metal producing, and recycling corporations are excellently positioned within the CE paradigm to contribute significantly to a resource efficient CE.
Innovative CECs will drive their respective corporations to be economically optimal while at the same time also maximizing RE.
System modeling and optimization should be used by corporations to ensure global optima are obtained for RE while at the same time setting the bar for a CE and highlighting metallurgical infrastructure criticality.
Policy makers should be made aware of the critical importance of metallurgical infrastructure to ensure there exists agility and system flexibility to deal with the vastly complex metal and material mixtures in products and, hence, to close the loop of the CE system.
Thorough technological, economic, and fundamental knowledge of the CE system permits the quantification of the limits of recycling and a CE, creating a fundamental basis for the formulation of environmental.
CE simulation models are linked to environmental LCA tools, providing the fundamental technological and statistical basis for the calculations of RI and RE.
A fundamental and technological basis for DfR guidelines is hence provided supporting eco-design by providing fundamental knowledge on CE systems and DfR.
Future DfR will link CAD and additive manufacturing via m-IoT process simulation to predict recyclate qualities that feed process metallurgy.
To realize an m-IoT requires the assimilation of not only real-time process data but also thermodynamic data to calibrate the required system models that quantify all the losses, including entropy.
The given theoretical engineering foundation provides a basis for the formulation of RE and provides the basis for CEE.
A CEE approach will provide the true techno-economic limits of a CE and highlight the importance of an agile and complete metallurgical infrastructure.
Delivering the CE
Best practice and good governance in resource and metallurgical corporations make them excellently suited to create CECs. This is the easiest way to show the potential of a CE. This will demonstrate the key role the metallurgical industry plays in establishing the m-IoT within the CE. This provides the metallurgical industry with the opportunity to play a leading role in digitalizing the CE system and linking all reactors and systems within the m-IoT paradigm, as shown by Figure 9. This rigor enables understanding and will help innovate the CE system but also keep feet on the ground and provide understanding of the limits of a CE system within the context of complex society defined by rather complex nonlinear and thermodynamically based interactions, as shown by the m-IoT reflected in Figure 8.
Furthermore, the significant opportunity that CE brings with it is that it shows how important metals are, forming its fabric through its complex interlinkage of metals and materials in the WoM. Metal associations[16,17,98, 99, 100, 101, 102, 103, 104] have a significant task to bring metals into the full focus of society, showing their respective importance (often operating in silos); it could be recommended that these associations get together even closer to ensure that the full metallurgical processing infrastructure is in optimal harmony to maximize RE (thus de-silo and service all metals at the same time). This will help to ensure that the so important metallurgical infrastructure remains intact, revealing, in fact, not only the criticality of materials, but also the criticality of metallurgical infrastructure. Therefore, together with the associations representing the producers of products,[105, 106, 107, 108] the metal associations are excellently positioned to play a key role within the CE. Together with the associations, the innovation being driven through the EU’s Knowledge Innovation Community (KIC), and more specifically through the EIT Raw Materials KIC, is crucial to create the CE. This provides a platform for informing policy, and a basis is created from which the CE can develop its fullest potential.
Some Final Thoughts and Questions
Will process metallurgy indeed be a key enabler for a CE due to metal’s high intrinsic recyclability properties?
Can process metallurgy iRE by digitalizing the WoM?
Will the sophisticated tools of CEE help to deliver the CE’s goals?
Can process metallurgy help shape CE policy as it truly reveals its limitations?
Is the m-IoT a key that will give process metallurgy the center of the CE stage?
Therefore, will the criticality of metallurgical infrastructure, i.e., m-IoT, be observed and innovatively developed within new CE business models?
Will metallurgical infrastructure be built and innovated by wise policy and not disrupted by unwise short-term business decisions that lack engineering and technology insight and depth?
Carrier metal metallurgy (Metal Wheel) has been optimized for minerals over many years. Consumer-designed minerals and the CE require this same basic metallurgical infrastructure (which policy must protect), but it requires more than these to be significantly more strongly interlinked in the WoM. Therefore, key questions, for example, are as follows:
“Will the future integrated steel plant be a smart linkage of blast, bath, and EAF furnaces and much more strongly integrated to nonferrous metallurgy, as shown by Figure 8?”
“Will metallurgy unleash its full strength and power by de-siloing it and integrating it into a full WoM and enabling the full potential of a CE?”
“Will the disruptive business models of CE be developed to accommodate this smart agile new business and technology environment that also embraces key metallurgical systems and infrastructure?”
What is the role of consumer behavior in consumption and collection in the CE?
Will our metallurgical and recycling simulation models and our impact be of use to inform climate change in a simple but game-changing manner?
Material scientists and developers should in future evaluate the resource efficiency of their new materials to check where these report to when recycled from complex EoL products. Thus the important questions to be addressed are: Will developing new materials in future also consider Fig. 1 in a PCR context to check CE relevance? Will material scientists come closer again to process metallurgists and engineers in a CE paradigm with its RE system (re)design thinking?
Ultimately, the answers to all these and other incisive questions may simply be, “Consume less!” Our presently rather complex consumerism simply creates too much entropy in the form of finely dissipated materials and metals in addition to the large amount of energy we consume. Thus, maximizing RE, as shown in Figure 6 (bottom), and visualizing this to empower the consumer is crucial by suitable RI visualization. Furthermore, material recycling index visualization shows the recovery of each individual element in a product. We have called it the “material recycling label,” visualized in the form of an “element flower.” This will help much to inform the environmental and CE communities that more complex models are required than the simple MFA models that are presently used to inform CE policy. It is interesting to note that a recent policy publication of Germany’s distinguished “Friedrich Ebert Stiftung” mentions the thermodynamic limitations of a CE, citing our United Nations Environmental Program (UNEP) report on metal recycling. This UNEP report discusses in detail these limitations in addition to metallurgical processing technology and its sophisticated systems.[5,7,9] The digitalized process metallurgy’s SIMP and m-IoT may provide the CEE tools[11,40,41,111] to guide a path toward a sustainable society. These tools will help advise policy of the opportunities and limits of a CE society on a theoretical and techno-economic basis. Above all it will also show the importance of a metallurgy and its high-tech processing infrastructure at the heart of a CE.
I especially thank the following people, who have helped me in special harmonizing and, in some cases spiritual, ways on my path of doing a small bit for sustaining Mother Earth for my children, Tatjana and Jean-Michel: Karen Reuter, Margaret Eastman, my parents, Dipl. Arch. Uta Junghardt, Professor Hanno Reuter, Dr. Kaia van Heerden, Dr. Moira Eastman, Dr. A. van Schaik (The Netherlands), Professor Ernst von Weizsäcker (UNEP, Germany), Professor Udo Boin (Germany), Mr. Robert Matusewicz (and the Outotec-Ausmelt team, Australia), Dr. John Floyd (Ausmelt, Australia), Professor Joachim Krüger (RWTH Aachen, Germany), Dr. Dave Hulbert (and furnace process control colleagues at Mintek, South Africa), Professor Jannie van Deventer (Zeobond, Australia), Professor Barry Wills (Minerals Engineering International, England), Professor Margot Weinen (TU Delft, The Netherlands), Dr. Vincent Swart (South Africa), and Professor Yongxiang Yang (TU Delft, The Netherlands) and Dr. Antti Roine (Outotec and the HSC Team at Pori and Espoo).
- 1.European Union: Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee of the Regions. Closing the loop—An EU Action Plan for the Circular Economy. http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:52014DC0398&from=EN, 2015. Accessed 16 May 2016
- 2.European Union: Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee of the Regions: On the Review of the List of Critical Raw Materials for the EU and the Implementation of the Raw Materials Initiative. http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:52014DC0297&from=EN, 2014. Accessed 16 May 2016
- 5.M.A. Reuter, C. Hudson, A. Van Schaik, K. Heiskanen, C. Meskers, and C. Hagelüken: United Nations Environmental Protection Report. http://www.unep.org/resourcepanel/Portals/50244/publications/UNEP_report2b_RecyclingOpportunities_130919.pdf, 2013. Accessed 13 May 2016 (over 400,000 downloads May 2013–Oct. 2015)
- 6.M.A. Reuter, K. Heiskanen, U. Boin, A. van Schaik, E. Verhoef, and Y. Yang: The Metrics of Material and Metal Ecology, Harmonizing the Resource, Technology and Environmental Cycles, 1st ed., Elsevier BV, Amsterdam, 2005Google Scholar
- 7.M.A. Reuter and A. van Schaik: in Encyclopedia of Ecology, 1st ed., S.E. Jorgensen and B.D. Faith, eds., Elsevier B.V., Oxford, 2008, pp. 2247–60Google Scholar
- 8.E. Worrel and M.A. Reuter: Handbook of Recycling, 1st ed., Elsevier B.V., Amsterdam, 2014Google Scholar
- 9.A. Van Schaik and M.A. Reuter: in Handbook of Recycling, E. Worrel and M.A. Reuter, eds., Elsevier, Amsterdam, 2014, pp. 307–78Google Scholar
- 14.United Nations Environmental Programme (UNEP): http://www.unep.org, 2016. Accessed 13 May 2016
- 16.World Steel Organization: http://www.worldsteel.org, 2016. Accessed 13 May 2016
- 17.Eurometaux: http://www.eurometaux.org, 2016. Accessed 13 May 2016
- 18.K. Miettinen: Nonlinear Multiobjective Optimization, 1st ed., vol. 12, Kluwer’s International Series in Operations Research & Management Science, Kluwer Academic Publishers, Boston, 1999Google Scholar
- 21.Mathematic: https://reference.wolfram.com/language/guide/Optimization.html, 2016. Accessed 13 May 2016 (Mathematica also has a wealth of other toolboxes, see https://www.wolfram.com/mathematica/)
- 22.AMPL: A Mathematical Programming Language, Building Optimization into Large-Scale Applications, Intuitive Algebraic Modeling System, http://ampl.com, 2016. Accessed 13 May 2016
- 23.Aspen Plus, AspenTech: Chemical Process Optimization Software, http://www.aspentech.com, 2016. Accessed 13 May 2016
- 24.Cycad Process: Metallurgical Process Simulation, http://www.cycadprocess.com, 2016. Accessed 13 May 2016
- 25.gPROMS: Process Systems Enterprise, Process Modelling Platform, http://www.psenterprise.com, 2016. Accessed 13 May 2016
- 26.HSC 9.1 and HSC Sim, Outotec: Pure Substance Database, Various Standard Application Modules, Process Simulation Linking Minerals and Metallurgical Processing, Environmental Assessment, http://www.outotec.com/hsc linked to the Proscon control system http://www.outotec.com/en/Products–services/Analyzers-and-automation/Process-control/Outotec-Proscon/ and control platform http://www.outotec.com/en/Products–services/Analyzers-and-automation/, 2016. Accessed 13 May 2016
- 27.JKSimMet, JKtech: Minerals Processing Simulation, http://jktech.com.au, 2016. Accessed 13 May 2016
- 29.METSIM: Metallurgical Steady-State and Dynamic Flowsheeting and Simulation, http://www.metsim.com, 2016. Accessed 13 May 2016
- 30.R.P. King: Modelling and Simulation of Mineral Processing Systems, 1st ed., Butterworth-Heinemann, Oxford http://www.mineraltech.com/MODSIM/, 2001. Accessed 13 May 2016
- 31.SimSci PRO/II, Schneider Electric: Process Simulation Software, http://software.schneider-electric.com/simsci/, 2016. Accessed 13 May 2016
- 32.USIM PAC: Minerals and Hydrometallurgical Process Simulation, http://www.caspeo.net/USIMPAC, 2016. Accessed 13 May 2016
- 33.PI System, OSIsoft: http://www.osisoft.com/Default.aspx, 2016. Accessed 13 May 2016
- 34.CALPHAD: Phase Diagrams, http://www.opencalphad.com, 2016. Accessed 13 May 2016
- 36.MTDATA: Phase Diagrams, National Physics Laboratory, www.npl.co.uk/science-technology/mathematics-modelling-and-simulation/mtdata/, 2016. Accessed 13 May 2016
- 37.Pandat: Computherm, http://www.computherm.com, 2016. Accessed 13 May 2016
- 38.Thermocalc: Thermocalc AB, http://www.thermocalc.com, 2016. Accessed 13 May 2016
- 40.I. Rönnlund, M.A. Reuter, S. Horn, J. Aho, M. Päällysaho, L. Ylimäki, and T. Pursula: Int. J. Life Cycle Assess., 2016, Part 1—online 6 May 2016Google Scholar
- 41.I. Rönnlund, M.A. Reuter, S. Horn, J. Aho, M. Päällysaho, L. Ylimäki, and T. Pursula: Int. J. Life Cycle Assess., 2016, Part 2—online 8 May 2016Google Scholar
- 42.M.A. Reuter and I. Kojo: World Metall. Erzmet., 2014, vol. 67(1), pp. 46–53Google Scholar
- 43.M.A. Reuter, R. Matusewicz, and A. van Schaik: World Metall. Erzmet., 2015, vol. 68 (3), pp. 132–146Google Scholar
- 44.M.A. Reuter and Y. Yang: in Smithells Metals Reference Book, 8th ed., Butterworth-Heinemann, Elsevier B.V., Amsterdam, 2004, pp. 40-16–40-29Google Scholar
- 45.European Union: Commission Delegated Regulation No. 874/2012 of 12 July 2012, supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires, 2012Google Scholar
- 46.E. Verhoef, G. Dijkema, and M.A. Reuter: J. Ind. Ecol., 2004, vol. 8 (1–2), pp. 23–43Google Scholar
- 50.S. Creedy, A. Glinin, R. Matusewicz, S. Hughes, and M.A. Reuter: World Metall. Erzmet., 2013, vol. 66(4), pp. 230–35Google Scholar
- 51.General Electric: Proficy CSense—Real-Time Big-Data Analysis or Process and System Data, http://www.geautomation.com/products/proficy-csense, 2016. Accessed 13 May 2016
- 52.D. Moolman, M.A. Reuter, and A. van Schaik: World Metall. Erzmet., 2005, vol. 58 (3), pp. 113–24Google Scholar
- 53.SAS, SAS Institute Inc.: Statistical Analysis Software, http://www.sas.com/en_us/home.html, 2016. Accessed 13 May 2016
- 54.WEDGE, Savcor: Fast Online Process Diagnostics, http://www.savcor.com/solutions/process-diagnostics/, 2016. Accessed 13 May 2016
- 55.G2, Gensym: Real-Time Process Optimization and Reasoning Software, http://www.gensym.com, 2016. Accessed 13 May 2016
- 56.M.A. Reuter, T.J. van der Walt, and J.S.J. van Deventer: Metall. Mater. Trans. B, 1992, vol. 23B, pp. 641–50Google Scholar
- 57.M.A. Reuter: Erzmetallurgy, 1993, vol. 46 (6), pp. 369–76Google Scholar
- 59.M.A. Reuter, C. Pretorius, C. West, P. Dixon, and M. Oosthuizen: J. Met., 1996, vol. 48 (12), pp. 51–53Google Scholar
- 60.G.R.F. AlvearFlores, S. Nikolic, and P.J. Mackey: J. Met., 2014, vol. 66 (5), pp. 823–32Google Scholar
- 65.ANSYS: Computational Fluid Dynamics, http://www.ansys.com, 2016. Accessed 13 May 2016
- 66.OpenFOAM: ESI-OpenCFD, Open Source CFDC, http://www.openfoam.com, 2016. Accessed 13 May 2016
- 67.modeFRONTIER: Integration Platform for Multi-objective and Multi-disciplinary Optimization, Provides a Seamless Coupling with Third Party Engineering Tools, Enables the Automation of the Design Simulation Process, and Facilitates Analytic Decision Making, http://www.esteco.com, 2016. Accessed 13 May 2016
- 68.DCS Computing: Committed to Excellence in Computational Modelling and Engineering Solutions for Flow Processes, http://www.dcs-computing.com/home, 2016. Accessed 13 May 2016
- 74.Tomra (and Titech) Sorting Equipment, 2016, https://www.tomra.com. Accessed 13 May 2016
- 75.D X-Ray Tomography, http://www.zeiss.com/microscopy/en_us/products/x-ray-microscopy.html and http://www.xre.be, 2016. Accessed 13 May 2016
- 76.Mineral Liberation Analysis (MLA): https://www.fei.com/products/sem/qemscan/, 2016. Accessed 13 May 2016
- 78.GaBi: Thinkstep, Environmental Assessment, http://www.gabi-software.com/international/index/, 2016. Accessed 13 May 2016
- 79.OpenLCA: Open LCA Organization, Environmental Assessment, http://www.openlca.org, 2016. Accessed 13 May 2016
- 80.Simapro 8: Pre Consultants, Environmental Assessment, https://www.pre-sustainability.com/simapro, 2016. Accessed 13 May 2016
- 83.Ellen MacArthur Foundation: https://www.ellenmacarthurfoundation.org/circular-economy/overview/concept, 2016. Accessed 13 May 2016
- 84.M.A.H. Shuva, M.A. Rhamdhani, G.A. Brooks, S. Masood, and M.A. Reuter: J. Cleaner Prod., 2016. Accessed 6 May 2016Google Scholar
- 85.World Business Council for Sustainable Development—WBCSD: http://www.wbcsd.org/home.aspx, 2016. Accessed 13 May 2016
- 86.Water Footprint Network: http://waterfootprint.org/en/, 2016. Accessed 13 May 2016
- 87.Global Footprint Network: http://www.footprintnetwork.org/en/index.php/GFN/, 2016. Accessed 13 May 2016
- 88.International Resource Panel (IRP): http://www.unep.org/resourcepanel/ as a part of the United Nations Environmental Programme, 2016. Accessed 13 May 2016
- 89.M.A. Reuter, J.J. Eksteen, and A. van Schaik: Yazawa Int. Symp. on Metallurgical and Materials Processing: Principles and Technologies, Mar. 3–6, 2003, vol. 1, San Diego, CA, 2003, pp. 1005–18Google Scholar
- 90.Outotec TSL and Kaldo references: Smelting of Concentrates, Residue, Wastes, Scrap, eWaste, http://www.outotec.com/en/About-us/Our-technologies/Smelting/Ausmelt-smelting-and-converting/ and http://www.outotec.com/en/About-us/Our-technologies/Recycling-and-residues/, 2016. Accessed 13 May 2016
- 91.SGS: http://www.sgs.com/en/mining/exploration-services/geometallurgy, 2016. Accessed 13 May 2016
- 92.Dowa Holdings Co., Ltd.: http://www.dowa.co.jp/index_e.html, 2016. Accessed 13 May 2016
- 93.Nyrstar: http://www.nyrstar.com/Pages/default.aspx, 2016. Accessed 13 May 2016
- 94.Umicore: http://www.umicore.com, 2016. Accessed 13 May 2016
- 95.Boliden: http://www.boliden.com, 2016. Accessed 13 May 2016
- 96.Korea Zinc Co., Ltd.: http://www.koreazinc.co.kr/english/main/page/main.aspx, 2016. Accessed 13 May 2016
- 97.Aurubis AG: Germany, www.aurubis.com, 2016. Accessed 22 July 2016.
- 99.International Zinc Association (IZA): www.zinc.org, 2016. Accessed 13 May 2016
- 100.International Nickel Association (INA): www.nickelinstitute.org, 2016. Accessed 13 May 2016
- 101.International Chrome Development Association (ICDA): http://www.icdacr.com/index.php?lang=en, 2016. Accessed 13 May 2016
- 102.International Lead Association (ILA): www.ila-lead.org, 2016. Accessed 13 May 2016
- 104.International Lead Zinc Study Group (ILZSG): http://www.ilzsg.org/static/home.aspx, 2016. Accessed 13 May 2016
- 105.WEEE Forum: http://www.weee-forum.org, 2016. Accessed 13 May 2016
- 106.Bureau of International Recycling (BIR): http://www.bir.org, 2016. Accessed 13 May 2016
- 107.Digital Europe: http://www.digitaleurope.org, 2016. Accessed 13 May 2016
- 108.Electrical Equipment Representative Association (EERA): http://www.eera.org, 2016. Accessed 13 May 2016
- 109.EIT Raw Materials Knowledge Innovation Community (KIC): http://eitrawmaterials.eu, 2016. Accessed 13 May 2016
- 110.M.A. Reuter and A. van Schaik: Annal. Mines, 2016, vol. 82, pp. 62−66Google Scholar
- 111.A. van Schaik and M.A. Reuter: World Metall. Erzmet., 2016, vol. 69 (4), pp. 201–16Google Scholar
- 112.H. Wilts: Deutschland auf dem Weg in die Kreislaufwirtschaft, FRIEDRICH-EBERT-STIFTUNG—Wirtschafts- und Sozialpolitik, 2016, firstname.lastname@example.orgGoogle Scholar