Advertisement

Significant Strengthening Effect on Martensitic Stainless Steel by Repetitive High-Stress Loading at Ultralow Temperature

  • Hengcheng LiaoEmail author
  • Heting Xu
  • Jingfan Tang
  • Shihui Huo
  • Daoqiong Huang
  • Hui Chen
Communication
  • 24 Downloads

Abstract

The effect of repetitive high-stress loading (RHSL) at ultralow temperature on the microstructure and mechanical properties of S04 martensitic steel was studied. RHSL significantly increases the yield strength of S04 steel from 1220 to 1650 MPa and raises the tension elastic modulus from 170 to 207.5 GPa with small plastic deformation. This most efficient strengthening mechanism involves the evolution of dislocation patterns and the formation of martensite twins.

Notes

This work was funded by the National Major Basic Research Project of China (Grant No. 613321).

Conflict of interest

The authors declare that they have no conflict of interest.

References

  1. 1.
    Y.L. Ding, M.Z. Pei, and Y.F. Guo: Met. Phys. Exam. Test., 2010, vol. 28 (6), pp. 9-12.Google Scholar
  2. 2.
    Z.X. Xia, Z.Y. Yang, J. Su, and Y.L. Ding: J. Aeronaut. Mater., 2018, vol. 28 (5), pp. 17-21.Google Scholar
  3. 3.
    Z.H. Zhang, Y.F. Wang, E.K. Zhang, S. Niu, X. Che, G.J. Ma, and L. Zhao: Trans. Metal. Heat Treat., 2014, vol. 39(10), pp. 42-46.Google Scholar
  4. 4.
    W.W. Su, Z.Y. Yang, and Y.L. Ding: Trans. Metal. Heat Treat.,2014, vol. 39 (4), pp. 15-18.Google Scholar
  5. 5.
    Q. Yu, Y.Y. Fan, Z.B. Liu, J.X. Liang, and Z.Y. Yang: Trans. Metal. Heat Treat., 2013, vol. 38 (9), pp. 16-21.Google Scholar
  6. 6.
    H.Z. Li, W.P. Tong, J.J. Cui, H. Zhang, L.Q. Chen, and L. Zuo: Mat. Sci. Eng. A, 2016, vol. 662, pp. 356-362.CrossRefGoogle Scholar
  7. 7.
    J. Li, J.Z. Zhou, S.Q. Xu, J. Sheng, S. Huang, Y.H. Sun, Q. Sun, and E.A. Boateng: Mat. Sci. Eng. A, 2017, vol. 707: 612-619.CrossRefGoogle Scholar
  8. 8.
    X. Bai, L.B. Zheng, and J.Y. Cu: J. Mater. Eng. Perform., 2017, vol. 26(3), pp. 1-6.Google Scholar
  9. 9.
    Z.Y. Zhao: Mod. Manuf. Technol. Equip., 2016, (6), pp. 114-150Google Scholar
  10. 10.
    A. Portevin and F. Le Chatelier: Comptes Rendus de l’Acade′mie des Sciences (CRAS), 1923, vol. 176, pp. 507-510.Google Scholar
  11. 11.
    P. Fernandez-Zelaia, B.S. Adair, V.M. Barker and S.D. Antolovich: Metall. Mater. Trans. A, 2015, vol.46, pp. 5596-5609CrossRefGoogle Scholar
  12. 12.
    J. Das, M. Sankaranarayana and T.K.Nandy: Mater. Sci. Eng. A, 2015, vol. 646, pp. 75-81CrossRefGoogle Scholar
  13. 13.
    T.Q. Li, Y.B. Liu, Z.Y. Cao, D.M. Jiang and L.R. Cheng: Mater. Sci. Eng. A, 2010, vol. 527(29-30), pp. 7808-7811.CrossRefGoogle Scholar
  14. 14.
    G.G. Yapici, I. Karaman, and Z.P. Luo: Acta Mater., 2006, vol. 54, pp. 3755-3771.CrossRefGoogle Scholar
  15. 15.
    N. V. Duamell, I. Ulacia, F. Galvez, S. Yi, J. Bohlen, D. Letzig, I. Hurtado, and M.T. Perez-Prado: Acta Mater., 2011, vol. 59 (18), pp. 6949-6962.CrossRefGoogle Scholar
  16. 16.
    G.T. Gray: J. Phys. IV, 1997, vol. 7 (3), pp. 423–28.Google Scholar
  17. 17.
    M.Naghizadeh and H. Mirzadeh: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4210-4216.CrossRefGoogle Scholar
  18. 18.
    M. Naghizadeh and H. Mirzadeh: Mater. Res. Express, 2018, vol. 5, p. 056529.  https://doi.org/10.1088/2053-1591/aac461 CrossRefGoogle Scholar
  19. 19.
    S. Takebayashi, T. Kunieda, N. Yoshinaga, K. Ushioda, and S. Ogata: ISIJ Int., 2010, vol. 50: 875-882.CrossRefGoogle Scholar
  20. 20.
    T. Ungar: Mat. Sci. Eng. A, 2011, vol. 309, pp. 14-22.Google Scholar
  21. 21.
    T. Shintani and Y. Murata: Acta Mater., 2011, vol. 59 (11), pp. 4314-4322.CrossRefGoogle Scholar
  22. 22.
    V.D. Mote, Y. Purushotham, and B.N. Dole: J. Theor. Appl. Phys., 2012, vol. 6, pp. 1-8.CrossRefGoogle Scholar
  23. 23.
    C.E. Kril and R. Birringer: Philo. Mag., 1998, vol. 77 (3), pp. 621-640.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2019

Authors and Affiliations

  • Hengcheng Liao
    • 1
    Email author
  • Heting Xu
    • 1
  • Jingfan Tang
    • 1
  • Shihui Huo
    • 2
  • Daoqiong Huang
    • 2
  • Hui Chen
    • 2
  1. 1.Jiangsu Key Laboratory for Advanced Metallic Materials, School of Materials Science and EngineeringSoutheast UniversityNanjingP.R. China
  2. 2.Science and Technology on Liquid Rocket Engines LaboratoryXi’anP.R. China

Personalised recommendations