Advertisement

Metallurgical and Materials Transactions A

, Volume 50, Issue 6, pp 2580–2584 | Cite as

Comparison of Microstructure and Mechanical Properties of Sintered γ-(Fe-Ni-P) Alloys with Abundant P Doping

  • Runjian Jiang
  • Ai Li
  • Guodong CuiEmail author
  • Chengsong Zhang
Communication
  • 177 Downloads

Abstract

The γ-(Fe-Ni-P) alloy with a high phosphorus content was obtained by spark plasma sintering. A supersaturated phosphorus solid solution has been developed and the precipitation of phosphide is suppressed in this γ-(Fe-Ni-P) alloy. This new structure of the γ-(Fe-Ni-P) alloy attains a higher yield strength (1067 MPa) without sacrificing plasticity. Its formation and strengthening mechanism are clarified by a comparison with the alloy obtained via conventional sintering.

Notes

This work was supported by the National Natural Science Foundation of China [Grant No. 51601156]; and Fundamental Research Funds for the Central Universities of China [Grant No. 2682016CX067].

Conflict of interests

The authors declare that they have no competing interest.

Author Contributions

Runjian Jiang wrote the manuscript. Guodong Cui initiated the research and provided technical input on sample design. Ai Li fabricated samples and performed the experiments. Runjian Jiang, Guodong Cui and Chengsong Zhang contributed to the technical discussions of results. All authors commented on the manuscript.

References

  1. 1.
    H. Kotan, M. Saber, C.C. Koch, R.O. Scattergood: Mater. Sci. Eng. A, 2012, vol. 552, pp. 310-315.CrossRefGoogle Scholar
  2. 2.
    M. van Schilfgaarde, I.A. Abrikosov, B. Johansson: Nat., 1999, vol. 400, pp. 46–49.Google Scholar
  3. 3.
    Shuangyu Liu, Hong Zhang, Jiandong Hu: Mater. Design, 2011, vol. 32, pp. 3686-3691.CrossRefGoogle Scholar
  4. 4.
    Changshuai Wang, Yongan Guo, Jianting Guo, Lanzhang Zhou: Mater. Sci. Eng. A, 2016, vol. 675, pp. 314-322.CrossRefGoogle Scholar
  5. 5.
    Robert O. Ritchie: Nat. Mater., 2011, vol. 10, pp. 817-822.CrossRefGoogle Scholar
  6. 6.
    Krzysztof Ziewiec, Artur Błachowski, Krzysztof Ruebenbauer, Aneta Ziewiec, Krystian Prusik, Jerzy Latuch, Marcin Zieba, Krzysztof Bryła: J. Alloys Compd., 2014, vol. 615, pp. S29-S34.CrossRefGoogle Scholar
  7. 7.
    J.I. Kim, J.H. Pak, K.-S. Park, J.H. Jang, D.-W. Suh, H.K.D.H. Bhadeshia: Int. J. Mater. Res., 2014, vol. 105, pp. 1166–72.Google Scholar
  8. 8.
    Pavel Lejcek, Mojmir Sob, Vaclav Paidar: Prog. Mater. Sci., 2017, vol. 87, pp. 83-139.CrossRefGoogle Scholar
  9. 9.
    Alfiia Akhatova, Frederic Christien, Vincent Barnier, Bertrand Radiguet, Emmanuel Cadel, Fabien Cuvilly, Philippe Pareige: Appl. Surf. Sci., 2019, vol. 463, pp. 203-210.CrossRefGoogle Scholar
  10. 10.
    S.F. Chen, T.S. Lui, L.H. Chen: Metall. Mater. Trans. A, 1994, vol. 25, pp. 557-561.CrossRefGoogle Scholar
  11. 11.
    Wuqian Chai, Randall M. German, Eugene A. Olevsky, Xialu Wei, Runjian Jiang, Guodong Cui: Adv. Eng. Mater., 2016, vol. 18, pp. 1889-1896.CrossRefGoogle Scholar
  12. 12.
    A. Muthuchamy, R. Kumar, A. Raja Annamalai, D.K. Agrawal, A. Upadhyaya: Mater. Charact., 2016, vol. 114, pp. 122–35.Google Scholar
  13. 13.
    B. Weglinski, J. Kaczmar: Powder Metall., 1980, vol. 23, pp. 210–216.CrossRefGoogle Scholar
  14. 14.
    Runjian Jiang, Ai Li, Guodong Cui, Chengsong Zhang, Hongtao Chen, Yixue Wang: Mater. Sci. Eng. A, 2017, vol. 707, pp. 1-11.CrossRefGoogle Scholar
  15. 15.
    Tienyin Chan, Shuntian Lin: J. Mater. Process Tech., 1999, vol. 89-90, pp. 165-170.CrossRefGoogle Scholar
  16. 16.
    H. Okamoto: J. Phase. Equilib. Diff., 2007, vol. 28, pp. 588-588.CrossRefGoogle Scholar
  17. 17.
    Xun Zhan, Frank Ernst: Acta Mater., 2016, vol. 104, pp. 274-282.CrossRefGoogle Scholar
  18. 18.
    Yuanyuan Cui, Yunfei Jia, Fuzhen Xuan: Sci. Rep., 2016, vol. 8, pp. 6199.CrossRefGoogle Scholar
  19. 19.
    Bevis Hutchinson, Pete Bate, David Lindell, Amer Malik, Matthew Barnett, Peter Lynch: Acta Mater., 2018, vol. 152, pp. 239-247.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2019

Authors and Affiliations

  • Runjian Jiang
    • 1
  • Ai Li
    • 1
    • 2
  • Guodong Cui
    • 1
    Email author
  • Chengsong Zhang
    • 1
  1. 1.School of Materials Science and EngineeringSouthwest Jiaotong UniversityChengduChina
  2. 2.School of Mechanical EngineeringSouthwest Jiaotong UniversityChengduChina

Personalised recommendations