Advertisement

Metallurgical and Materials Transactions A

, Volume 50, Issue 5, pp 2331–2341 | Cite as

Electroless Codeposition of Ni-P Composite Coatings: Effects of Graphene and TiO2 on the Morphology, Corrosion, and Tribological Properties

  • Mehmet UysalEmail author
Article
  • 64 Downloads

Abstract

Given the excellent electrochemical and mechanical properties of graphene oxide (GO) and ceramic particles, excellent corrosion and tribological properties are expected when GO and TiO2 particles are incorporated into the Ni-P matrix. For this purpose, Ni-P composite coatings reinforced with GO and TiO2 ceramic particles were produced by electroless deposition. The structure, composition, morphology, microhardness, and corrosion resistance of the Ni-P and Ni-P composite coatings were analyzed using field emission scanning electron microscopy, X-ray diffraction, anodic polarization curves, and electrochemical impedance spectroscopy. The tribological behaviors of the Ni-P and Ni-P composite coatings were studied under dry conditions. The excellent corrosion and wear properties of the Ni-P-TiO2-GO composite coatings were attributed to the synergistic effects of the GO and TiO2 ceramic particles. It is expected that electroless Ni-P composite coatings reinforced with GO and TiO2 ceramic particles can establish a new trend, especially for engineering materials where wear resistance and corrosion are of importance.

Notes

References

  1. 1.
    S. Karthikeyan, L. Vijayaraghavan, S. Madhavan, A. Almeida: Metall. Mater. Trans. A., 2016, 47, 5, 2223–2231.CrossRefGoogle Scholar
  2. 2.
    K. Yu-Qing, C. Mao-Sheng, J. Yuan, L. Zhang, B. Wen, F. Xiao-Yong: J. Alloys Compd 2010, 495 254–259.CrossRefGoogle Scholar
  3. 3.
    S. Arai, T. Sato and M. Endo: J. Electrochem. Soc., 2010, 157, 11D570-D576.CrossRefGoogle Scholar
  4. 4.
    H. Luo, M. Leitch, Y. Behnamian, Y. Ma, H. Zeng, and J.-L. Luo: Surf. Coat. Technol., 2015, 277, 99–106.Google Scholar
  5. 5.
    I.Sivandipoor, F.Ashrafizadeh, Appl. Surf. Sci, 2012,263, 314–319.CrossRefGoogle Scholar
  6. 6.
    J.N. Balaraju, V. Ezhil Selvi, and K.S. Rajam: Mater. Chem. Phys., 2010, vol. 120 546–51.Google Scholar
  7. 7.
    M. Franco, W. Sha, S. Malinov, H. Liu, Wear, 2014, 317, 254-264.CrossRefGoogle Scholar
  8. 8.
    S. Karthikeyan, B. Ramamoorthy, Appl. Surf. Sci, 2014, 307, 654-660.CrossRefGoogle Scholar
  9. 9.
    W.X.Chen, J.P. Tu, Z.D. Xu, W.L. Chen, X.B. Zhang, D.H.Cheng, Materials Letters 2003, 57 1256-1260.CrossRefGoogle Scholar
  10. 10.
    T.R. Tamilarasan, U. Sanjitha, M. Siva Shankarb, and G. Rajagopal: Wear, 2017, vol. 390–91, pp. 385–91.Google Scholar
  11. 11.
    H.I Wu, F. Liu, W. Gong, F. Ye, L. Hao, J. Jiang, and S. Han: Surf. Coat. Technol., 2015, vol. 272, pp. 25–32.Google Scholar
  12. 12.
    R. Hu, Y. Su, Y. Liu, H. Liu, Y. Chen, C. Cao and H. Ni: Nanoscale Res Lett., 2018, 13, 198.CrossRefGoogle Scholar
  13. 13.
    R. Soleimani, F. Mahboubi, M. Kazemi & S. Y. Arman: Sur. Eng., 2015, 31, 9.Google Scholar
  14. 14.
    A. Mostafa, S. Mahmoud Monirvaghefi, A. Saatchi, and S. Mehdi Hosseini: Appl. Surf. Sci., 2012, vol. 258, pp. 2439–46.Google Scholar
  15. 15.
    S. Wang, X.Huang, M. Gong, W.Huang: Appl. Surf. Sci., 2015, 357, 328–332.CrossRefGoogle Scholar
  16. 16.
    Y.J. Mai, M.P. Zhou, H.J. Ling, F.X. Chen, W.Q. Lian, X.H. Jie: Appl. Surf. Sci., 2018, 433, 232–239.CrossRefGoogle Scholar
  17. 17.
    Y. Tang, X. Yang, R. Wang, and M. Li: Mater. Sci. Eng., A, 2014, vol. 599, pp. 247–54.Google Scholar
  18. 18.
    P. Bimal Singh, S. Nayak, K. Kamala Nanda, B. Kumar Jena, S. Bhattacharjee, and L. Besra: Carbon, 2013, vol. 61, pp. 47–56.Google Scholar
  19. 19.
    K. Jagannadham, Metallurgy And Material. 2013, 44, 552–559.CrossRefGoogle Scholar
  20. 20.
    P. Zhou, W.Li, Y. Li, X. Lu, X. Jin, and J. Chen: J. Electrochem. Soc., 2017,164 (2) D75-D81.CrossRefGoogle Scholar
  21. 21.
    C.M. Praveen Kumar, T.V. Venkatesha, and R. Shabadi: Mater. Res. Bull., 2013, vol. 48, pp. 1477–83.Google Scholar
  22. 22.
    H.Yin, Q. Dai, X Hao, W. Huang, X. Wang, Surf. Coat. Technol . 2018,352, 411-419.CrossRefGoogle Scholar
  23. 23.
    H. Algul, M. Tokur, S. Ozcan, M. Uysal, T. Cetinkaya, H. Akbulut, A. Alp: Appl. Surf. Sci., 2015, 359, 340–348.CrossRefGoogle Scholar
  24. 24.
    D. Ning, A. Zhang, M. Murtaza, H. Wu, J. Alloys Compd., 2019,777, 1245-1250.CrossRefGoogle Scholar
  25. 25.
    S. Mirzamohammadi, H. Khorsand, M. Aliofkhazraei, D.V. Shtansky: Tribol Int., 2018, 117, 68–77.CrossRefGoogle Scholar
  26. 26.
    Q. Zhang, Z. Qin, Q. Luo, Z. Wu, L. Liu, B. Shen, W.Hu: Sci Rep. 2017, 7, 1338.CrossRefGoogle Scholar
  27. 27.
    K. Hari Krishnan, S. John, K.N. Srinivasan, J. Praveen, M. Ganesan, P.M. Kavimani: Metall. Mater. Trans. A., 2006, 37, 1917–26.Google Scholar
  28. 28.
    A. Akyol, H. Algul, M. Uysal, H. Akbulut, A. Alp: Appl. Surf. Sci., 2018, 453, 482–492.CrossRefGoogle Scholar
  29. 29.
    M. Gholizadeh-Gheshlaghi, D. Seifzadeh, P. Shoghi, A. Habibi-Yangjeh, J. Alloys Compd.,2018,769, 149-160.CrossRefGoogle Scholar
  30. 30.
    J. Wojewoda-Budka, A. Wierzbicka-Miernik, L. Litynska-Dobrzynska, M.J. Szczerba, G. Mordarski, M. Mosiałek, Z. Huber, P. Zie: Electrochim. Acta, 2016, 209, 183–191.CrossRefGoogle Scholar
  31. 31.
    V. Vincenzo, S. Olga, M. Matarangolo: Catal. Today, 2018, 315, 230–236.CrossRefGoogle Scholar
  32. 32.
    J. Jibo, F. Chenqi, W. Qian, L. Zhu, S. Han, H: Mater. Chem. Phys.2017, 199, 239- 248.CrossRefGoogle Scholar
  33. 33.
    N.K. Konstantin, B. Ozbas, H.C. Schniepp, R.K. Prud’homme, I.A. Aksay, R. Car, 2008, 4,36–41.Google Scholar
  34. 34.
    W.Shao, X. Liu, H. Min, G.Dong, Q. Feng, and S. Zuo, ACS Appl. Mater. Interfaces, 2015, 7, 6966–6973.CrossRefGoogle Scholar
  35. 35.
    X. Zhang, P. Dong, B. Zhang, S. Tang, Z. Yang, Y. Chen, W. Yang J: J. Alloys Compd., 2016, 671, 465- 472.CrossRefGoogle Scholar
  36. 36.
    L. Hong, L. Michael, Y.Behnamian, M. Yongsheng, H. Zenga, L. Jing-Li: Surf. Coat. Technol., 2015: 277, 99–106.CrossRefGoogle Scholar
  37. 37.
    C. Wang, Z. Farhat, G. Jarjoura, M. K. Hassan, A. M.Abdullah, Surf. Coat. Technol, 2018,334, 243-252.CrossRefGoogle Scholar
  38. 38.
    S. Kundu,· S. K. Das,· P. Sahoo, Silicon, 2018,10, 29–342.CrossRefGoogle Scholar
  39. 39.
    D. Kuang, X. Liye, L. Lei, H. Wenbin, W. Yating: Appl. Surf. Sci., 2013, 273, 484– 490.CrossRefGoogle Scholar
  40. 40.
    C. Juanjuan, L. Jianliang, X. Dangsheng, H. Yong, J. Yujuan, Q. Yongkun: Appl. Surf. Sci., 2016, 361, 49–56.CrossRefGoogle Scholar
  41. 41.
    J. Novakovic, P. Vassiliou: Electrochim. Acta 2009, 54, 2499–2503.CrossRefGoogle Scholar
  42. 42.
    A. Jabbar, G. Yasin, W. Qamar Khan, M.Y. Anwar, R.Mustafa Korai, M. Naeem Nizam, and G. Muhyodin: RSC Adv., 2017, vol. 7, p. 31100.Google Scholar
  43. 43.
    Y. Fan, Y. He, P. Luo, T. Shi, and X. Chen: J. Electrochem. Soc., 2016, 163, (3) D68-D73.CrossRefGoogle Scholar
  44. 44.
    M. Hasan Sadhir, M. Saranya, M. Aravind, A. Srinivasan, A. Siddharthan, and N. Rajendran: Appl. Surf. Sci., 2014, vol. 320, pp. 171–76.Google Scholar
  45. 45.
    E. Ubong, X. Zhen, S. Jerzy J Non Cryst Solids, 2018, 485,47-56.CrossRefGoogle Scholar
  46. 46.
    E. Ubong, S. Jerzy, Ultrason Sonochem., 2018, 44, 288-298.CrossRefGoogle Scholar
  47. 47.
    G. Song, S. Li, G. Liu, Q. Fu, and C. Pan, J. Electrochem. Soc.,2018,165,501-510.CrossRefGoogle Scholar
  48. 48.
    J. Jibo, C. Haotian, Z. Liying, W. Qian, S. Han, H. Lin, and W. Huihui: RSC Adv.,2016, 6, 109001.CrossRefGoogle Scholar
  49. 49.
    Y. Bahareh, X. Fang, A. Iftikhar, H. Xianghui Hou, X. Yongde, and Z. Yanqiu: Sci Rep., 2015, vol. 5, p. 11579.Google Scholar
  50. 50.
    A. El-Ghazaly, A. Geraldine, and H. G. Salem: Composites Part A, 2017, vol. 95, pp. 325–336.CrossRefGoogle Scholar
  51. 51.
    H. Algul, H. Gul, M. Uysal, A. Alp,H. Akbulut: Trans. Indian. Inst. Met., 2015, 68, 79–87.CrossRefGoogle Scholar
  52. 52.
    Z. Wenzheng, S. Xiaoliang, W. Mang, X. Zengshi, Y. Jie, S. Siyuan, and W. Yufu Wang: Wear, 2014, 310 33–40.CrossRefGoogle Scholar
  53. 53.
    R. Paweł,S. Ludosław, Z. Dariusz, J. Lucyna, K. Piotr, U. Maciej: J Eur Ceram Soc., 2015, 35, 87–94.CrossRefGoogle Scholar
  54. 54.
    L. Hongqing, X. Youtao, L. Kai, H. Liping, H. Shansong, Z. Bizeng, Z. Xuebin: Ceram. Int. 2014, 40, 12821–12829.CrossRefGoogle Scholar
  55. 55.
    L. Na, Z. Lan, Z. Yongchao, X. Miting, X. Yuxi, R. Xinwei, and M. Huizhong:, J. Electrochem. Soc., 2018, 165, (5) D215-D222.CrossRefGoogle Scholar
  56. 56.
    B. Guoying, W. Jinqing, Y. Zhigang, W. Honggang, W. Zhaofeng, Y. Shengrong: RSC Adv., 2014, 4, 47096.CrossRefGoogle Scholar
  57. 57.
    M. Uysal, H. Akbulut, M.Tokur, H. Algül, T. Çetinkaya: J. Alloys Compd., 2016, 654, 185-195.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2019

Authors and Affiliations

  1. 1.Department of Metallurgy and Materials Engineering, Faculty of EngineeringSakarya UniversitySakaryaTurkey
  2. 2.Development and Application Center (SARGEM)Sakarya University ResearchSakaryaTurkey

Personalised recommendations