Advertisement

Metallurgical and Materials Transactions A

, Volume 50, Issue 2, pp 863–873 | Cite as

Time-Dependent Evolution of Ti-Bearing Oxide Inclusions During Isothermal Holding at 1573 K (1300 °C)

  • Minggang Li
  • Hiroyuki Matsuura
  • Fumitaka Tsukihashi
Article
  • 52 Downloads

Abstract

Ti-bearing oxide inclusions are utilized to enhance the properties of steel used in shipbuilding, multi-purpose gas carriers, and pipelines in accordance with the principles of oxide metallurgy. Conventionally, Ti-bearing oxide inclusions have been assumed to be stable during isothermal holding. The authors propose the possibility of modifying Ti-bearing oxide inclusions by appropriate heat treatment. To provide fundamental information on the evolution of Ti-bearing inclusions in solid steel during isothermal holding, the effect of the isothermal holding time on their evolution at 1573 K (1300 °C) was studied systematically. For heterogeneous phase Al+Ti oxide in the as-cast alloys, the composition and size distribution were maintained during isothermal holding. In contrast, homogeneous phase Al-Ti oxide in the as-cast alloys changed to a heterogeneous oxide consisting of an Al-rich part and a Ti-rich part and its shape changed from spherical to irregular. The composition of the Al-Ti oxide changed upon isothermal holding for 0.5 hour, and it occurred earlier in the Al-Ti oxide with a higher Al content. The evolution mechanism is considered to involve the precipitation of Al2O3 from the Al-Ti oxide owing to crystallization of glassy oxide during isothermal holding. The results challenge the long-held opinion that Ti-bearing oxide inclusions are maintained in solid steel during isothermal holding, which is the first step toward modifying oxide inclusions by heat treatment as a new concept in oxide metallurgy.

Notes

Acknowledgments

The authors would like to thank Professor Xiaojun Hu and Dr. Huijing Cheng in the State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing for their assistance in the analysis by automatic SEM-EDS.

References

  1. 1.
    D. Zhang, H. Terasaki, and Y. Komizo: Acta Materialia, 2010, 58, 1369-1378.CrossRefGoogle Scholar
  2. 2.
    Y. Hou, W. Zheng, Z. Wu, G. Li, N. Moelans, M. Guo, and B. S. Khan: Acta Materialia, 2016, 118, 8-16.CrossRefGoogle Scholar
  3. 3.
    J. Shim, Y. Suh, Y. Cho, J. Shim, J. Byun, and D. Lee: Acta Materialia, 2001, 49, 2115-2122.CrossRefGoogle Scholar
  4. 4.
    J. M. Gregg, and H. K. D. Bhadeshia: Acta Materialia, 1997, 45, 739-748.CrossRefGoogle Scholar
  5. 5.
    J. Byun, J. Shim, Y. Cho, and D. Lee: Acta Materialia, 2003, 51, 1593-1606.CrossRefGoogle Scholar
  6. 6.
    J. Shim, Y. Cho, S. Chung, J. Shim, and D. Lee: Acta Materialia, 1999, 47, 2751-2760.CrossRefGoogle Scholar
  7. 7.
    H. Mabuchi, R. Uemori, and M. Fujioka: ISIJ Int., 1996, 36, 1406-1412.CrossRefGoogle Scholar
  8. 8.
    J. L. Lee, and Y. T. Pan: ISIJ Int., 1995, 35, 1027-1033.CrossRefGoogle Scholar
  9. 9.
    Y. Kang, J. Jang, J. Park, and C. Lee: Met. Mater. Int., 2014, 1, 119-127.CrossRefGoogle Scholar
  10. 10.
    Y. Li, J. Liu, Y. Deng, X. Han, W. Hu, and C. Zhong: Journal of Alloys and Compounds, 2016, 673, 28-37.CrossRefGoogle Scholar
  11. 11.
    Takahashi T, Sakae T, Yoshida T (1967) Tetsu-to-Hagané 53:342-49.CrossRefGoogle Scholar
  12. 12.
    K. Takano, R. Nakao, S. Fukuoto, T. Tsutiyama, and S. Takaki: Tetsu-to-Hagané, 2003, 89, 616-622.CrossRefGoogle Scholar
  13. 13.
    H. Shibata, T. Tanaka, K. Kimura, and S. Kitamura: Ironmaking Steelmaking, 2010, 37, 522-528.CrossRefGoogle Scholar
  14. 14.
    Y. Ren, L. Zhang, and P.C. Pistorius: Metall. Mater. Trans. B, 2017, 48, 2281-2292.CrossRefGoogle Scholar
  15. 15.
    H. Shibata, K. Kimura, T. Tanaka, and S. Kitamura: ISIJ Int., 2011, 51, 1944-1950.CrossRefGoogle Scholar
  16. 16.
    K. Kim, S.J. Kim, H. Shibata, and S. Kitamura: ISIJ Int., 2014, 54, 2144-2153.CrossRefGoogle Scholar
  17. 17.
    K. Kim, H. Shibata, and S. Kitamura: ISIJ Int., 2014, 54, 2678-2686.CrossRefGoogle Scholar
  18. 18.
    C. Liu, K. Kim, S. Kim, J. Li, S. Ueda, X. Gao, H. Shibata, and S. Kitamura: Metall. Mater. Trans. B, 2015, 46, 1875-1884.CrossRefGoogle Scholar
  19. 19.
    C. Liu, S. Yang, J. Li, H. Ni, and X. Zhang: Metall. Mater. Trans. B, 2017, 48, 1348-1357.CrossRefGoogle Scholar
  20. 20.
    F. Ruby-Meyer, J. Lehmann, and H. Gaye: Scand. J. Metall., 2000, 29, 206-212.CrossRefGoogle Scholar
  21. 21.
    I. Jung, S. A. Decterov, and A. D. Pelton: ISIJ Int., 2004, 44, 527-536.CrossRefGoogle Scholar
  22. 22.
    I. Jung, G. Eriksson, P. Wu, and A. D. Pelton: ISIJ Int., 2009, 49, 1290-1297.CrossRefGoogle Scholar
  23. 23.
    Y. Kang, and J. Lee: ISIJ Int., 2017, 57, 1665-1667.CrossRefGoogle Scholar
  24. 24.
    H. Matsuura, C. Wang, G. H. Wen, and S. Sridhar: ISIJ Int., 2007, 47, 1265-1274.CrossRefGoogle Scholar
  25. 25.
    C. Wang, N. T. Nufher, and S. Sridhar: Metall. Mater. Trans. B, 2009, 40, 1005-1021.CrossRefGoogle Scholar
  26. 26.
    C. Wang, N. T. Nufher, and S. Sridhar: Metall. Mater. Trans. B, 2009, 40, 1022-1034.CrossRefGoogle Scholar
  27. 27.
    C. Wang, N. T. Nufher, and S. Sridhar: Metall. Mater. Trans. B, 2010, 41, 1084-1094.CrossRefGoogle Scholar
  28. 28.
    C. Wang, N. Verma, Y. Kwon, W. Tiekink, N. Kikuchi, and S. Sridhar: ISIJ Int., 2011, 51, 375-381.CrossRefGoogle Scholar
  29. 29.
    M. Li, H. Matsuura, and F. Tsukihashi: Metall. Mater. Trans. B, 2017, 48, 1915-1923.CrossRefGoogle Scholar
  30. 30.
    M. Nagano, S. Nagashima, H. Maeda, and A. Kato: Ceramics Int., 1999, 25, 681-687.CrossRefGoogle Scholar
  31. 31.
    C. Xuan, A. V. Karasev, and P. G. Jönsson,: ISIJ Int., 2016, 56, 1204-1209.CrossRefGoogle Scholar
  32. 32.
    C. Xuan, A. V. Karasev, P. G. Jönsson, and K. Nakajima: Steel Research Int., 2017, 88, 262-270.CrossRefGoogle Scholar
  33. 33.
    K. Nakajima: Tetsu-to-Hagané, 1994, 80, 383-388.CrossRefGoogle Scholar
  34. 34.
    M. Humenik, and W. D. Kingery: J. Am. Ceram. Soc., 1954, 37, 18-23.CrossRefGoogle Scholar
  35. 35.
    H. Ito, M. Hino, and S. Ban-ya: Tetsu-to-Hagané, 1997, 83, 773-778.CrossRefGoogle Scholar
  36. 36.
    W. Y. Cha, T. Miki, Y. Sasaki, and M. Hino: ISIJ Int., 2008, 48, 729-738.CrossRefGoogle Scholar
  37. 37.
    K. Yamamoto, T. Hasegawa, and J. Takamura: Tetsu-to-Hagané, 1993, 79, 1169-1175.CrossRefGoogle Scholar
  38. 38.
    Y. Kang and H. Lee: ISIJ Int., 2010, 50, 501-508.CrossRefGoogle Scholar
  39. 39.
    M. Jiang, X. H. Wang, Z. Y Hu, K. P. Wang, C. W. Yang, and S. R. Li: Materials Characterization, 2015, 108, 58-67.CrossRefGoogle Scholar
  40. 40.
    Q. Huang, X. Wang, M. Jiang, Z.Hu, and C. Yang: Steel Research Int., 2015, 87, 445-455.CrossRefGoogle Scholar
  41. 41.
    Z. Yang, F. Wang, S. Wang, and B. Song: Steel Research. Int., 2008, 79, 390-395.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2018

Authors and Affiliations

  • Minggang Li
    • 1
  • Hiroyuki Matsuura
    • 1
    • 2
  • Fumitaka Tsukihashi
    • 1
  1. 1.Graduate School of Frontier SciencesThe University of TokyoKashiwaJapan
  2. 2.Graduate School of EngineeringThe University of TokyoBunkyoJapan

Personalised recommendations