Advertisement

Metallurgical and Materials Transactions A

, Volume 50, Issue 1, pp 271–284 | Cite as

Effect of Tool Geometry and Heat Input on the Hardness, Grain Structure, and Crystallographic Texture of Thick-Section Friction Stir-Welded Aluminium

  • M. M. Z. AhmedEmail author
  • B. P. Wynne
  • W. M. Rainforth
  • Adrian Addison
  • J. P. Martin
  • P. L. Threadgill
Article
  • 120 Downloads

Abstract

The effect of tool geometries on the microstructure and crystallographic texture of 32-mm-thick friction stir-welded AA6082 has been investigated. The use of a tapered probe tool results in a significant variation in the grain size from the top to the base of the nugget, whereas parallel probe tools produce a uniform grain size throughout the nugget. The grain size in the nugget reflects the amount of deformation experienced and the speed of deformation expressed in terms of strain rate. An approach is proposed to calculate the strain rate during FSW of aluminum for which values between 217 and 362 s−1 were obtained. The strain rate can be either uniform or varied through the joint thickness based on the type of tool used. The tapered tool produces a variation of the strain rate, whilst the parallel tool has a uniform strain rate throughout, which can explain the obtained grain structure in each case. The tool geometries also influenced texture development with the tapered tool producing a tilt of the local shear reference frame by an angle to the normal direction equal to the taper angle.

Notes

Acknowledgment

The author (MMZA) gratefully acknowledges the Egyptian Government for the financial support.

References

  1. 1.
    W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes, G.B. Patent Application No. 9125978.8, December 1991.Google Scholar
  2. 2.
    2. Hori, H. and H. Hino, Welding International, 2003. 17(4): p. 287-292.CrossRefGoogle Scholar
  3. 3.
    3. Enomoto, M., Welding International, 2003. 17(5): p. 341-345.CrossRefGoogle Scholar
  4. 4.
    4. Kawasaki, T., T. Makino, K. Masai, H. Ohba, Y. Ina, and M. Ezumi, JSME International Journal Series A, 2004. 47(3): p. 502-511.CrossRefGoogle Scholar
  5. 5.
    5. Threadgill, P. L., A. J. Leonard, H. R. Shercliff, and P.J. Withers, International Materials Reviews, 2009. 54(2): p. 49-93.CrossRefGoogle Scholar
  6. 6.
    6. R. Rai, A. De, H. K. D. H. Bhadeshia, and T. DebRoy, Science and Technology of Welding and Joining, 2011, 16 (4): p. 325.CrossRefGoogle Scholar
  7. 7.
    Ahmed, M.M.Z., E. Ahmed, A.S. Hamada, S.A. Khodir, M.M. El-Sayed Seleman, and B.P. Wynne (2016) Mater. Des. 91: p. 378-387.CrossRefGoogle Scholar
  8. 8.
    8. Ahmed, M.M.Z., B.P. Wynne, and J.P. Martin, Science and Technology of Welding and Joining, 2013. 18 (8): p. 680,CrossRefGoogle Scholar
  9. 9.
    9. Ahmed, M.M.Z., B.P. Wynne, W.M. Rainforth, and P.L. Threadgill, Materials Characterization, 2012, 64: p. 107-117.CrossRefGoogle Scholar
  10. 10.
    10. Woo, W., H. Choo, D. Brown, and Z. Feng, Metallurgical and Materials Transactions A, 2007, 38(1): p. 69-76.CrossRefGoogle Scholar
  11. 11.
    11. Sorensen, C. and A. Stahl, Metallurgical and Materials Transactions B, 2007, 38(3): p. 451-459.CrossRefGoogle Scholar
  12. 12.
    Scialpi, A., L.A.C. De Filippis, and P. Cavaliere, Mater. Des. 2007, 28: p. 1124–1129.CrossRefGoogle Scholar
  13. 13.
    13. Pilchak, A.L., M.C. Juhas, and J.C. Williams, Metallurgical and Materials Transactions A, 2007, 38(2): p. 435-437.CrossRefGoogle Scholar
  14. 14.
    J.G. Perrett, J. Martin, P.L. Threadgill, and M.M.Z. Ahmed: Aluminium 2000 conference 13–17 March, Florence, Italy, 2007.Google Scholar
  15. 15.
    15. Elangovan, K. and V. Balasubramanian, Materials Science and Engineering: A, 2007, 459(1-2): p. 7-18.CrossRefGoogle Scholar
  16. 16.
    16. Fujii, H., L. Cui, M. Maeda, and K. Nogi, Materials Science and Engineering: A, 2006, 419(1-2): p. 25-31.CrossRefGoogle Scholar
  17. 17.
    17. Boz, M. and A. Kurt, Materials & Design, 2004, 25(4): p. 343-347.CrossRefGoogle Scholar
  18. 18.
    Zhang J, P. Upadhyay, Y. Hovanski and DP Field (2018) Metall. Mater. Trans. A, 49A: pp. 210-222.Google Scholar
  19. 19.
    Shen, J., F. Wang, U.F.H. Suhuddin, S. Hu, W. Li, and J.F. dos Santos (2015) Metall. Mater. Trans. A 46A: p. 2809-2813.CrossRefGoogle Scholar
  20. 20.
    Shen, J., S.B.M. Lage, U.F.H. Suhuddin, C. Bolfarini, and J.F. dos Santos (2015) Metall. Mater. Trans. A, 49(1): p. 241-254.Google Scholar
  21. 21.
    Imam, M., Y. Sun, H. Fujii, N. Ma, S. Tsutsumi, and H. Murakawa (2017) Metall. Mater. Trans. A, 48A: 208-229.CrossRefGoogle Scholar
  22. 22.
    Doude, H.R., J.A. Schneider, and A.C. Nunes (2014) Metall. Mater. Trans. A, 45A: p. 4411-4422.CrossRefGoogle Scholar
  23. 23.
    Avettand-Fenoel, M.-N.l. and R. Taillard (2015) Metall. Mater. Trans. A, 46(1): p. 300-314.CrossRefGoogle Scholar
  24. 24.
    Ahmed, M.M.Z., S. Ataya, M.M. El-Sayed Seleman, H.R. Ammar, and E. Ahmed, (2017) J. Mater. Process. Technol., 242: p. 77-91.CrossRefGoogle Scholar
  25. 25.
    25. Huang, Y., Xie, Y., Meng, X., Lv, Z., Cao, J., Journal of Materials Processing Tech.,2018, 252, p. 233–241CrossRefGoogle Scholar
  26. 26.
    26. Su, J.Q., T.W. Nelson, R. Mishra, and M. Mahoney, Acta Materialia, 2003, 51(3): p. 713-729.CrossRefGoogle Scholar
  27. 27.
    27. Sato, Y., M. Urata, and H. Kokawa, Metallurgical and Materials Transactions A, 2002, 33(3), p. 625-635.CrossRefGoogle Scholar
  28. 28.
    28. Fonda, R. and J. Bingert, Metallurgical and Materials Transactions A, 2004, 35(5), p. 1487-1499.CrossRefGoogle Scholar
  29. 29.
    29. Chang, C.I., C.J. Lee, and J.C. Huang, Scripta Materialia, 2004, 51, p. 509-514.CrossRefGoogle Scholar
  30. 30.
    30. Gerlich, A., G. Avramovic-Cingara, and T. North, Metallurgical and Materials Transactions A, 2006, 37(9), p. 2773-2786.CrossRefGoogle Scholar
  31. 31.
    31. Gerlich, A., M. Yamamoto, and T.H. North, Metallurgical and Materials Transactions A, 2007, 38(6), p. 1291-1302.CrossRefGoogle Scholar
  32. 32.
    32. Masaki, K., Y.S. Sato, M. Maeda, and H. Kokawa, Scripta Materialia, 2008, 58(5), p. 355-360.CrossRefGoogle Scholar
  33. 33.
    33. Neto, D. M., and Neto, P., The International Journal of Advanced Manufacturing Technology, 2013, 65, 1–4, p. 115–126.CrossRefGoogle Scholar
  34. 34.
    34 Cabibbo, M., H.J. McQueen, E. Evangelista, S. Spigarelli, M. Di Paola, and A. Falchero, Materials Science and Engineering: A, 2007, 460-461, p. 86-94.CrossRefGoogle Scholar
  35. 35.
    35. Ahmed, M.M.Z., B.P. Wynne, W.M. Rainforth, and P.L. Threadgill, Scripta Materialia, 2008, 59(5), p. 507-510.CrossRefGoogle Scholar
  36. 36.
    Ahmed, M.M.Z., B.P. Wynne, M.M. El-Sayed Seleman, and W.M. Rainforth, (2016) Mater. Des., 103: 259-267.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2018

Authors and Affiliations

  • M. M. Z. Ahmed
    • 1
    • 2
    • 3
    Email author
  • B. P. Wynne
    • 2
  • W. M. Rainforth
    • 2
  • Adrian Addison
    • 4
  • J. P. Martin
    • 5
  • P. L. Threadgill
    • 4
  1. 1.Mechanical Engineering DepartmentThe British University in EgyptCairoEgypt
  2. 2.Department of Materials Science and EngineeringThe University of SheffieldSheffieldUK
  3. 3.Department of Metallurgical and Materials EngineeringSuez UniversitySuezEgypt
  4. 4.TWI LtdCambridgeUK
  5. 5.TWI Technology Centre LtdRotherhamUK

Personalised recommendations