Advertisement

Metallurgical and Materials Transactions A

, Volume 49, Issue 11, pp 5497–5508 | Cite as

Microstructural Characterization and Mechanical Properties of TIG-Welded API 5L X60 HSLA Steel and AISI 310S Stainless Steel Dissimilar Joints

  • A. H. Saedi
  • E. Hajjari
  • S. Mohsen Sadrossadat
Article
  • 230 Downloads

Abstract

Dissimilar joining of API 5L X60 ferritic HSLA steel and AISI 310S austenitic stainless steel was conducted by tungsten inert gas (TIG) welding process using ERNiCr-3, ER310, ER2209, and ER309L filler metals. Microstructural characteristics and mechanical properties of the weldments were studied using optical and scanning electron microscopy, ferritometry, microhardness, tensile, and impact tests. The microstructure investigations revealed macro-segregation occurrence and formation of Type II boundaries at the interface of welds with API 5L X60 steel. In tension tests, the joints prepared by ER2209 filler metal showed the maximum yield and ultimate tensile strength values, and the failures were always obtained at the side of API 5L X60. The results of Charpy impact tests indicated that the maximum fracture energy is related to the weld made by ER2209 filler metal. At last, it was concluded that for the dissimilar welding between API 5L X60 and AISI 310S, the weld metal prepared by ER2209 duplex stainless steel filler metal offers the optimum properties at room temperature.

Notes

Acknowledgments

The financial support provided by Shahid Chamran University of Ahvaz through the Grant No. 95/3/02/31400 is appreciated.

References

  1. 1.
    H. Naffakh, M. Shamanian, F. Ashrafizadeh, J. Mater. Process.Technol. 2010, vol. 45, pp. 2564–2573.Google Scholar
  2. 2.
    A.R. Khalifeh, A. Dehghan, E. Hajjari, Acta Metall. Sinica., 2013, vol. 26, pp. 721- 727.CrossRefGoogle Scholar
  3. 3.
    L. Wei, Y. Liying, and L. Minxu: Proc. 8th Int. Pipeline Conf., Calgary, Canada, 2010.Google Scholar
  4. 4.
    G. Fallatah, A. Sheikh, Z. Khan, and J. Boah: Proc. 6th Saudi Engineering Conf., Dhahran, Saudi Arabia, 2002.Google Scholar
  5. 5.
    Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications, ASTM standard A 240/A240M, ASTM International, 2016.Google Scholar
  6. 6.
    M. Farooq: Ph.D Thesis, Royal Institute of Technology (KTH), Stockholm, Sweden, 2013Google Scholar
  7. 7.
    H. Georg, M. Graf, and C. Kalwa: Proc. International Symposium Niobium 2001, Orlando, USA, 2001.Google Scholar
  8. 8.
    M.K. Samal, M. Seidenfuss, E. Roos, K. Balani, Eng. Fail. Anal., 2011, vol. 18, pp. 999-1008.CrossRefGoogle Scholar
  9. 9.
    H. Shah Hosseini, M. Shamanian, A. Kermanpur, Mater. Charact., 2011, vol. 62, pp. 425-431.CrossRefGoogle Scholar
  10. 10.
    P. Prabaharan, K. D. Ramkumar, N. Arivazhagan, J. Mater. Res., 2014, vol. 29, pp. 3011-3023.CrossRefGoogle Scholar
  11. 11.
    G. Sayiram, N. Arivazhagan, Mater. Charact., 2015, vol. 102, pp 180-188.CrossRefGoogle Scholar
  12. 12.
    A. Mortezaie, M. Shamanian, Int. J. Press. Vessels Pip., 2014, vol. 116, pp. 37–46.CrossRefGoogle Scholar
  13. 13.
    I. Hajiannia, M. Shamanian, M. Kasiri, Mater. Des., 2013, vol. 50, pp. 566-573.CrossRefGoogle Scholar
  14. 14.
    H. Tasalloti, P. Kah, J. Martikainen, Mater. Charact., 2017, vol. 123, pp. 29-41.CrossRefGoogle Scholar
  15. 15.
    B. I. Mendoza, Z. C. Maldonado, H. A. Albiter, P. E. Robles, Engineering, 2010, vol. 2, pp. 520-528.CrossRefGoogle Scholar
  16. 16.
    M. Sadeghian, M. Shamanian, A. Shafyei, Mater. Des., 2014, vol. 60, pp. 678-684.CrossRefGoogle Scholar
  17. 17.
    J. Wang, M. Lu, L. Zhang, W. Chang, L. Xu, L. Hu, Int. J. Miner. Metall. Mater., 2012, vol. 19, pp. 518-524.CrossRefGoogle Scholar
  18. 18.
    S. Kou: Welding Metallurgy, 2nd ed., Wiley, New York, 2003.Google Scholar
  19. 19.
    J. C. Lippold, D. J. Koteki, Welding metallurgy and weldability of Stainless steels, Wiley, New York, 2005.Google Scholar
  20. 20.
    T. Y. Kuo, H. T. Lee, Mater. Sci. Eng. A, 2002, vol. 338, pp. 202–212.CrossRefGoogle Scholar
  21. 21.
    P. L. Ferrabdini, C. T. Rios, A.T. Dutra, M.A.J aime, P.R. Mei, R. Caram, Mater. Sci. Eng. A, 2006, vol. 435, pp. 139–144.CrossRefGoogle Scholar
  22. 22.
    Sh. Wang, Q. Ma, Y. Li, Mater. Des., 2011, vol. 32, pp. 831-837.CrossRefGoogle Scholar
  23. 23.
    A.V. Jebaraj, L. Ajaykumar, Procedia Eng., 2013, vol. 64, pp. 456–466.CrossRefGoogle Scholar
  24. 24.
    M. Shojaati, B. Beidokhti, Constr. Build. Mater., 2017, vol. 147, pp. 608–615CrossRefGoogle Scholar
  25. 25.
    H. Pouraliakbar, M. Hamedi, A.H. Kokabi, A. Nazari, Mater. Res., 2014, vol. 17, pp. 106–114.CrossRefGoogle Scholar
  26. 26.
    A.L. Schaeffler, Met. Prog., 1949, vol. 56, pp. 680–680B.Google Scholar
  27. 27.
    T.W. Nelson, J.C. Lippold, M.J. Mills, Weld. J., 2000, vol. 55, pp. 267–277.Google Scholar
  28. 28.
    P.B. Srinivasan, V. Muthupandi, W. Dietzel, V. Sivan, Mater. Des., 2006, vol. 27, pp. 182–191.CrossRefGoogle Scholar
  29. 29.
    S. Kou, Y.K. Yang, Weld. J., 2007, vol. 86, pp. 303–312.Google Scholar
  30. 30.
    M. Sireesha, V. Shankar, S.K. Albert, S. Sundaresan, Mater. Sci. Eng. A, 2000, vol. 292, pp. 74–82.CrossRefGoogle Scholar
  31. 31.
    R. Dehmolaei, M. Shamanian, A. Kermanpure, Mater. Charact., 2008, vol. 59, pp. 1447–1454.CrossRefGoogle Scholar
  32. 32.
    T.W. Nelson, J.C. Lippold, M.J. Mills, Sci. Technol. Weld. Joining, 1998, vol. 3, pp. 249–255.CrossRefGoogle Scholar
  33. 33.
    J. Wang, M.Xu. Lu, L. Zhang, W. Chang, L. N. Xu, L.H. Hu, Int. J. Miner. Metall. Mater., 2012, vol. 19, pp. 518-524.CrossRefGoogle Scholar
  34. 34.
    J.N. Dupont, C.S. Kusko, Weld. J., 2007, vol. 86, pp. 51–54.Google Scholar
  35. 35.
    Welding Handbook, American Welding Society (AWS), 2006.Google Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2018

Authors and Affiliations

  • A. H. Saedi
    • 1
  • E. Hajjari
    • 1
  • S. Mohsen Sadrossadat
    • 1
  1. 1.Department of Materials Science and Engineering, Faculty of EngineeringShahid Chamran University of AhvazAhvazIran

Personalised recommendations