Advertisement

Metallurgical and Materials Transactions A

, Volume 49, Issue 11, pp 5848–5857 | Cite as

Effects of Different Graphite Types on the Thermal Fatigue Behavior of Bionic Laser-Processed Gray Cast Iron

  • Haiqiu Lu
  • Ming Liu
  • Dahui Yu
  • Ti Zhou
  • Hong Zhou
  • Peng Zhang
  • Haifeng Bo
  • Wei Su
  • Zhihui Zhang
  • Heng Bao
Article

Abstract

In order to study the thermal fatigue behavior of bionic gray cast iron with different types of graphite (from A to E), first, the effects of A to E types of graphite on the thermal fatigue properties were studied. At the same time, the crack initiation and propagation modes of different gray cast iron types were analyzed. In addition, for improving the thermal fatigue properties of gray cast iron, the anti-fatigue mechanism of the coupled bionic structure on gray cast iron was investigated. In this case, the thermal fatigue properties were measured by the number, length, and width of cracks. The results revealed that the gray cast iron with A-type graphite had the best fatigue resistance compared to others. However, C-, D-, and E-type graphite exhibited the greatest effect on the number, length, and width of crack. Interestingly, the bionic gray cast iron sample with D-type graphite exhibited improved fatigue resistance most obviously compared to the non-bionic sample.

Notes

Acknowledgments

This work was supported by Project 985-High Performance Materials of Jilin University, Project 985-Bionic Engineering Science and Technology Innovation and double first-class project by Jilin Province and Jilin University (SXGJXX2017-14).

References

  1. 1.
    X. Yang, Z.H. Zhang, J.T. Wang and L.Q. Ren, Journal of Alloys and Compounds 2015, vol. 626, pp. 260-263.CrossRefGoogle Scholar
  2. 2.
    A. Vadiraj, G. Balachandran, M. Kamaraj, B. Gopalakrishna and D. Venkateshwara-Rao: Tribology International 2010, vol. 43, pp. 647–653.CrossRefGoogle Scholar
  3. 3.
    Steven C. Noe Thomas J. Mackin: Engineering Failure Analysis 2002, vol. 9, pp. 63-76.CrossRefGoogle Scholar
  4. 4.
    G. L. Rivera, R. E. Boeri and J. A. Sikora: Scripta Materialia 2004, vol. 50, pp. 331-335.CrossRefGoogle Scholar
  5. 5.
    Morris E. Fine: Metallurgical and Materials Transactions A 1980, vol. 11A, pp. 365-379.CrossRefGoogle Scholar
  6. 6.
    A. R. Ghaderi, M. Nili-Ahmadabadi, H.M. Ghasemi: Wear 2003, vol. 255, pp. 410-416.CrossRefGoogle Scholar
  7. 7.
    G. P. Reddy, M.C. Rukadikar: Journal of Agricultural Engineering Research 1986, vol. 21, pp. 4403-4410.Google Scholar
  8. 8.
    W. Xue and Y. Li: Journal of Alloys and Compounds 2016, vol. 689, pp. 408-415.CrossRefGoogle Scholar
  9. 9.
    P. Yi, Y. Liu, C. Fan, X. Zhan, P. Xu and T. Liu: Optics & Laser Technology 2017, vol. 90, pp. 52-64.CrossRefGoogle Scholar
  10. 10.
    Byeong-choon Goo and Choong-hwan Lim: Journal of Mechanical Science and Technology 2012, vol. 26, pp. 1719-1724.CrossRefGoogle Scholar
  11. 11.
    U. G. Wegst, H. Bai, E. Saiz, A. P. Tomsia and R. O. Ritchie: Nature materials 2015, vol. 14, pp. 23-36.CrossRefGoogle Scholar
  12. 12.
    L. Ren and X. Li: Science China Technological Sciences 2013, vol. 56, pp. 884-897.CrossRefGoogle Scholar
  13. 13.
    C. Meng, H. Zhou, Y. Zhou, M. Gao, X. Tong, D. Cong, C. Wang, F. Chang, L.Ren: Optics & Laser Technology 2014, vol. 57, pp. 57-65.CrossRefGoogle Scholar
  14. 14.
    T. Xin, Z. Hong, C. Li, Z. Zhihui and R. Luquan: International Journal of Fatigue 2008, vol. 30, pp. 1125-1133.CrossRefGoogle Scholar
  15. 15.
    X. Tong, H. Zhou, L. Ren, Z. Zhang, W. Zhang and R. Cui: International Journal of Fatigue 2009, vol. 31, pp. 668-677.CrossRefGoogle Scholar
  16. 16.
    Q. Sui, H. Zhou, D. Zhang, Z. Chen and P. Zhang: Metallurgical and Materials Transactions A 2017, vol. 48, pp. 3758-3769.CrossRefGoogle Scholar
  17. 17.
    L. Yang, G. Sun, and Y. Zhang: Microstructure of Cast Irons—Part 1: Graphite Classification by Visual Analysis, MOD, ISO 945-1: 2008.Google Scholar
  18. 18.
    X. Tong, H. Zhou, W. Chen, W. Jiang, X. Li, L. Ren, Z. Zhang: Optics &Laser Technology 2009, vol. 41, pp. 671-678.CrossRefGoogle Scholar
  19. 19.
    R. C. Hugo, H. Kung, J. R. Weertman, R. Mitra, J. A. Knapp, D. M. Follstaedt: Acta Materialia 2003, vol. 51, pp. 1937-1943.CrossRefGoogle Scholar
  20. 20.
    R. L. Hecht, R. B. Dinwiddie, H. Wang: Journal of Materials Science 1999, vol. 34, pp. 4775-4781.CrossRefGoogle Scholar
  21. 21.
    Z. Jing, H. Zhou, P. Zhang, C. Wang, C. Meng and D. Cong: Applied Surface Science 2013, vol. 271, pp. 329-336.CrossRefGoogle Scholar
  22. 22.
    Erwin Gamboa and Andrej Atrens: Engineering Failure Analysis 2003, vol. 10, pp. 521-558.CrossRefGoogle Scholar
  23. 23.
    X. Wang, W. Zhang, B. Guo and W. Zhao: Materials Science and Engineering: A 2014, vol. 609, pp. 310-317.CrossRefGoogle Scholar
  24. 24.
    J. Grum and J. M. Slabe: Applied Surface Science 2006, vol. 252, pp. 4486-4492.CrossRefGoogle Scholar
  25. 25.
    A. V. Gusarov, M. Pavlov and I. Smurov: Physics Procedia 2011, vol. 12, pp. 248-254.CrossRefGoogle Scholar
  26. 26.
    J. Schijve: Fatigue of Structures and Materials, 2nd ed., Springer, New York, 2008, pp. 13-56.Google Scholar
  27. 27.
    K. Shi, S. Hu and H. Zheng: Surface and Coatings Technology 2011, vol. 206, pp. 1211-1217.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2018

Authors and Affiliations

  • Haiqiu Lu
    • 1
    • 2
  • Ming Liu
    • 1
    • 2
  • Dahui Yu
    • 1
    • 2
  • Ti Zhou
    • 1
    • 3
  • Hong Zhou
    • 1
    • 2
  • Peng Zhang
    • 1
    • 2
  • Haifeng Bo
    • 1
    • 2
  • Wei Su
    • 1
    • 2
  • Zhihui Zhang
    • 4
  • Heng Bao
    • 5
  1. 1.Key Laboratory of Automobile Materials, Ministry of EducationJilin UniversityChangchunP.R. China
  2. 2.School of Material Science and TechnologyJilin UniversityChangchunP.R. China
  3. 3.School of Mechanical Science and EngineeringJilin UniversityChangchunP.R. China
  4. 4.Key Laboratory of Bionic Engineering, Ministry of EducationJilin UniversityChangchunP.R. China
  5. 5.Security Department of 9588 TroopsChangchunP.R. China

Personalised recommendations