Advertisement

Metallurgical and Materials Transactions A

, Volume 49, Issue 11, pp 5888–5903 | Cite as

In Vitro Biodegradation and Mechanical Properties of Mg-Zn Alloy and Mg-Zn-Hydroxyapatite Composite Produced by Mechanical Alloying for Potential Application in Bone Repair

  • Emee Marina Salleh
  • Hussain Zuhailawati
  • Siti Noor Fazliah Mohd Noor
  • Norinsan Kamil Othman
Article
  • 43 Downloads

Abstract

A biodegradable Mg-6.5 wt pct Zn (Mg-Zn) alloy and Mg-6.5 wt pct Zn reinforced with 10 wt pct hydroxyapatite (HA) composite were prepared by mechanical milling. In vitro biodegradation activity as a function of immersion time was performed in Hank’s balanced salt solution (HBSS). The dissolution of Mg ions (Mg2+) decreased from 75.74 µg/ml of pure Mg to 59.24 µg/ml and 46.88 µg/ml corresponding to the Mg-Zn alloy and Mg-Zn/HA composite, respectively. This finding indicates the progressive effect of HA followed by the Zn addition in decelerating the degradation rate of Mg. More positive corrosion potential of Mg-6.5 wt pct Zn alloy (− 1.5015 V) and Mg-Zn/10 wt pct HA composite (− 1.4647 V) than that of pure Mg (− 1.6972 V) suggested that the Mg-Zn/10 wt pct HA composite exhibited the highest corrosion resistance in the bioenvironment. The compressive strength values after 7 days of immersion in HBSS of the Mg-Zn alloy and Mg-Zn/HA composite are 230.64 and 278.46 MPa, respectively, and these are considerably higher compared to the compressive strength of the cortical bone (100 to 230 MPa).

Notes

Acknowledgments

The authors would like to thank Universiti Sains Malaysia RU-PRGS Grant No. 8046026, Malaysian Ministry of High Education (FRGS Grant No. 6071304) for the financial support.

References

  1. 1.
    F. Witte, V. Kaese, H. Haferkamp, E. Switzer, A.M. Lindenberg, C.J. Wirth and H. Windhagen: Biomater, 2005, vol. 26, pp. 3557-3563.CrossRefGoogle Scholar
  2. 2.
    M.K. Datta, D.T. Chou, D. Hong, P. Saha, S.J.Chung, B. Lee, A. Sirinterlikci, M. Ramanathan, A. Roy and P.N. Kumta: Mater. Sci. Eng. B, 2011, vol. 176, pp. 1637-1643.CrossRefGoogle Scholar
  3. 3.
    I. Stulikova and B. Smola: Mater. Charact, 2010, vol. 61: 952-958.CrossRefGoogle Scholar
  4. 4.
    M. Nemeca, V. Gartnerova and A. Jager: Mater. Charact, 2016, vol. 119, pp. 129-136.CrossRefGoogle Scholar
  5. 5.
    R. Zeng, D. Wolfgang, W. Frank, H. Nobert and B. Carsten: Adv. Biomater, 2008, vol. 10, pp. B3-B14.Google Scholar
  6. 6.
    S. Zhang, X. Zhang, C. Zhao, J. Li, Y. Song, C. Xie, H. Tao, Y. Zhang, Y. He, Y. Jiang and Y. Bian: Acta Biomater, 2010, vol. 6, pp. 626-640.CrossRefGoogle Scholar
  7. 7.
    H.R. Bakhsheshi-Rad, M.H. Idris, M.R. Abdul-Kadir, A. Ourdjini, M. Medraj, M. Daroonparvar and E. Hamzah: Mater. Des, 2014, vol. 53, pp. 283-292.CrossRefGoogle Scholar
  8. 8.
    M. Gupta and N.M.L. Sharon: Magnesium, Magnesium Alloys, and Magnesium Composites. 3rd ed., John Wiley & Sons, New York, 2011, pp. 257-283.CrossRefGoogle Scholar
  9. 9.
    E.M. Salleh, Z. Hussain, S. Ramakrishnan and B.K. Dhindaw: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2519–2528.CrossRefGoogle Scholar
  10. 10.
    G.L. Song GL: Corros. Sci, 2007, vol. 49, pp.1696-1701.CrossRefGoogle Scholar
  11. 11.
    X. Gu, Y. Zheng, Y. Cheng, S. Zhong and T. Xi: Biomater, 2009, vol. 30, pp. 484-498.CrossRefGoogle Scholar
  12. 12.
    S. Shadanbaz and G. J. Dias: Acta Biomater, 2012, vol. 8, pp. 20–30.CrossRefGoogle Scholar
  13. 13.
    C. F. Dunne, G. K. Levy, O. Hakimi, E. Aghion, B. Twomey and K. T.Stanton: Surf. Coat. Technol, 2016, vol. 289, pp. 37-44.CrossRefGoogle Scholar
  14. 14.
    Y.W.Song, D.Y.Shan and E.H. Han: Mater. Lett, 2008, vol. 62, pp. 3276-3279.CrossRefGoogle Scholar
  15. 15.
    L. Xu, F. Pan, G. Yu, L.Yang, E. Zhang and K. Yang: Biomater., 2009, vol. 30, pp. 1512- 1523.CrossRefGoogle Scholar
  16. 16.
    M. Tomozawa and S. Hiromoto: Appl. Surf. Sci, 2011, vol. 257, pp. 8253– 8257.CrossRefGoogle Scholar
  17. 17.
    A.A. Nasser, A.M. Barakat, J.K. Lim: Ceram. Int, 2013, vol. 39, pp. 183-195.CrossRefGoogle Scholar
  18. 18.
    W. Li, S. Guan, J. Chen, J. Hu, S. Chen, L. Wang and S. Zhu: Mater. Charact, 2011, vol. 62, pp. 1158-1165.CrossRefGoogle Scholar
  19. 19.
    L.M. Plum, L. Rink and H. Haase H: Int. J. Environ. Res. Public Health, 2010, vol. 7, pp. 1342-1365.CrossRefGoogle Scholar
  20. 20.
    D. Vojtech, J. Kubasek, J. Serak and P. Novak: Acta Biomater, 2011, vol. 7, pp. 3515-3522.CrossRefGoogle Scholar
  21. 21.
    C. Castellani, R.A. Lindtner, P. Hausbrandt, E.Tschegg, S.E. Stanzl-Tschegg, G. Zanoni, S. Beck S and W.E. Weinberg: Acta Biomater, 2011, vol. 7, pp. 432-440.CrossRefGoogle Scholar
  22. 22.
    J. Zhang, J. Guan, C. Zhang, H. Wang, W. Huang, S. Guo, X. Niu, Z. Xie and Y. Wang: Biomed. Mater, 2015, vol. 10, pp. 1-10.Google Scholar
  23. 23.
    N.D. Evans, E. Gentleman, X. Chen, C.J. Roberts, J.M. Polak and M.M. Stevens: Biomater, 2010, vol. 31, pp. 3244-3252.CrossRefGoogle Scholar
  24. 24.
    F. Anghelina, D. Ungureanu, V. Bratu, I. Popescu and C. Rusanescu: Appl. Surf. Sci, 2013, vol. 285, pp. 65-71.CrossRefGoogle Scholar
  25. 25.
    K.A. Khalil: IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2012; 012031.CrossRefGoogle Scholar
  26. 26.
    A.K. Khanra, H.C. Jung, K.S. Hong and K.S. Shin: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6283-6288.CrossRefGoogle Scholar
  27. 27.
    T. Kraus, S.F. Fischerauer, A.C. Hanzi, P.J. Uggowitzer, J.F. Loffler and A.M. Weinberg: Acta Biomater, 2012, vol. 8, pp. 1230-1238.CrossRefGoogle Scholar
  28. 28.
    D. Gopi, P. Bhalaji, S. Ramya and L. Kavitha: J. Ind. Eng. Chem, 2015, vol. 23, pp. 218-227.CrossRefGoogle Scholar
  29. 29.
    B. Homayun and A. Afshar: J. Alloys Compd, 2014, vol. 607, pp. 1-10.CrossRefGoogle Scholar
  30. 30.
    N. Hort, Y. Huang, D. Fechner, M. Stormer, C. Blawert, F. Witte, C. Vogt, H. Drucker, R. Willumeit and K. Kainer: Acta Biomater, 2010, vol. 6, pp. 1714-1725.CrossRefGoogle Scholar
  31. 31.
    M. Bohner and J. Lemaitre: Biomater, 2009, vol. 30, pp. 2175-2179.CrossRefGoogle Scholar
  32. 32.
    D.R.Crapper McLachlan: Neurobiology of Aging, 1986, vol. 7, pp. 525-532.CrossRefGoogle Scholar
  33. 33.
    Y. Jang, B. Collins, J. Sankar and Y. Yun: Acta Biomater, 2013, vol. 9, pp. 8761-8770.CrossRefGoogle Scholar
  34. 34.
    T. Kokubo and H. Takadama: Biomater, 2006, vol. 27, pp. 2907-2915.CrossRefGoogle Scholar
  35. 35.
    A.C. Fisher-Cripps: Nanoindentation, 2002, vol. 1, pp. 2–16.Google Scholar
  36. 36.
    W.C. Oliver, G.M. Pharr: J. Mater. Res, 2004, vol. 19 pp. 3–20.CrossRefGoogle Scholar
  37. 37.
    S. Nag, R. Banerjee and H.L. Fraser: Acta Biomater, 2007, vol. 3, pp. 369-376.CrossRefGoogle Scholar
  38. 38.
    G. Wei: Recent Pat. Corros. Sci, 2011, vol. 1, pp. 72-90.Google Scholar
  39. 39.
    C. Ou, W. Lu, Z. Zhan, P. Huang, P. Yan, B. Yan and M. Chen: Int. J. Electrochem. Sci, 2013, vol. 8, pp. 9518-9530.Google Scholar
  40. 40.
    R. del Campo, B.Savoini, A.Munoz, M.A.Monge and G.Garces: J. Mech. Behav. Biomed. Mater, 2014, vol. 39, pp. 238-246.CrossRefGoogle Scholar
  41. 41.
    M. Okada and T. Matsumoto: Jpn. Dent. Sci. Rev, 2015, vol. 51, pp. 85-95.CrossRefGoogle Scholar
  42. 42.
    A.A. Zadpoor: Mater. Sci. Eng. C, 2014, vol. 35, pp. 134-143.CrossRefGoogle Scholar
  43. 43.
    D. Liu, Y. Ding, T. Guo, X. Qin, C. Guo, S. Yu and S. Lin: Biomed. Mater, 2014, vol. 9, pp. 1-9.Google Scholar
  44. 44.
    E. Gentleman, Y.C. Fredholm, G. Jell, N. Lotfibakhshaiesh, M.D. O’Donnell, R.G. Hill and M.M. Stevens: Biomater, 2010, vol. 31, pp. 3949-3956.CrossRefGoogle Scholar
  45. 45.
    K. Alvarez and H. Nakajima: Mater, 2009, vol. 2, pp. 790-832.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2018

Authors and Affiliations

  • Emee Marina Salleh
    • 1
  • Hussain Zuhailawati
    • 1
  • Siti Noor Fazliah Mohd Noor
    • 2
  • Norinsan Kamil Othman
    • 3
  1. 1.Biomaterials Niche Area, School of Materials and Mineral Resources Engineering, Engineering CampusUniversiti Sains MalaysiaNibong TebalMalaysia
  2. 2.Cranofacial and Biomaterials Science Cluster, Advanced Medical and Dental InstituteUniversiti Sains MalaysiaKepala BatasMalaysia
  3. 3.School of Applied Physics, Faculty of Science and TechnologyUniversiti Kebangsaan Malaysia (UKM)BangiMalaysia

Personalised recommendations