Metallurgical and Materials Transactions A

, Volume 48, Issue 6, pp 2791–2800 | Cite as

Stress-Induced Twinning and Phase Transformations during the Compression of a Ti-10V-3Fe-3Al Alloy

Symposium: PTM 2015: Solid-Solid Phase Transformations in Inorganic Materials
First Online:

Abstract

A metastable β Ti-10V-3Al-3Fe (wt pct) alloy containing different α phase fractions after thermo-mechanical processing was compressed to 0.4 strain. Detailed microstructure evaluation was carried out using high-resolution scanning transmission electron microscopy and electron back-scattering diffraction. Stress-induced β → α′′ and β → ω transformation products together with {332}〈113〉β and {112}〈111〉β twinning systems were simultaneously detected. The effects of β phase stability and strain rate on the preferential activation of these reactions were analyzed. With an increase in β phase stability, stress-induced phase transformations were restricted and {112}〈111〉β twinning was dominant. Alternatively, less stable β conditions or higher strain rates resulted in the dominance of the {332}〈113〉β twinning system and formation of secondary α′′ martensite.

Keywords

Martensite High Strain Rate Deformation Twin Chemical Free Energy Elemental Powder Metallurgy 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in to check access.

Notes

Acknowledgments

The authors are grateful to Professor O. M. Ivasishin and Dr. D. Savvakin of the Institute for Metal Physics, Ukraine for providing the source material. The financial support of the Engineering Materials Research Strength at UOW is also appreciated. Dr. M. Ahmed acknowledges the support received through Endeavour Research Fellowship programme. This research used equipment funded by the Australian Research Council (LE120100104, LE0237478, and LE0882613).

References

  1. 1.
    H. Sasano, and T. Suzuki: in “Crystal structure of martensites in Ti-Mo-Al alloys”, presented at the Titanium ‘80, science and technology: proceedings of the Fourth International Conference on Titanium, Kyoto, Japan, 1980.Google Scholar
  2. 2.
    L. C. Zhang, T. Zhou, M. Aindow, S. P. Alpay, M. J. Blackburn, and M. H. Wu, J. Mater. Sci. 40 (2005) 2833-36.CrossRefGoogle Scholar
  3. 3.
    T. W. Duerig, J. Albrecht, D. Richter, and P. Fischer, Acta Metall. 30 (1982) 2161-72.CrossRefGoogle Scholar
  4. 4.
    T. Grosdidier and M. J. Philippe, Mater. Sci. Eng. A, 291 (2000) 218-23.CrossRefGoogle Scholar
  5. 5.
    F. Sun, J. Y. Zhang, M. Marteleur, T. Gloriant, P. Vermaut, D. Laillé, et al., Acta Mater., 61 (2013), 6406-17.CrossRefGoogle Scholar
  6. 6.
    M. Ahmed, D. Wexler, G. Casillas, O. M. Ivasishin, and E. V. Pereloma, Acta Mater. 84 (2015) 124-35.CrossRefGoogle Scholar
  7. 7.
    M. Marteleur, F. Sun, T. Gloriant, P. Vermaut, P. J. Jacques, and F. Prima, Scr. Mater. 66 (2012) 749-52.CrossRefGoogle Scholar
  8. 8.
    M. Morinaga, T. Maya, K. Sone, and H. Adachi: in: Theoretical design of titanium alloys, Presented at the Sixth World Conference on Titanium Alloys, Cannes, 1988.Google Scholar
  9. 9.
    O. Grässel, L. Krüger, G. Frommeyer, and L. W. Meyer, Int. J. Plast., 16 (2000) 1391-1409.CrossRefGoogle Scholar
  10. 10.
    G. Frommeyer, U. Brüx, and P. Neumann, ISIJ Int., 43(2003), 438-46.CrossRefGoogle Scholar
  11. 11.
    S. Lee, Y. Estrin, and B.C. De Cooman, Metall. Mater. Trans. A, 45A (2014), 717-30.CrossRefGoogle Scholar
  12. 12.
    S. Hanada, O. Izumi, Metall. Trans. A. 17 (1986), 1409-20CrossRefGoogle Scholar
  13. 13.
    T. Furuhara, K. Kishimoto, and T. Maki, Mater. Trans. JIM, 35(12), 1994, 843-50.CrossRefGoogle Scholar
  14. 14.
    T. Grosdidier, C. Roubaud, M.-J. Philippe, and Y. Combres, Scr. Mater., 36 (1997), 21-8.CrossRefGoogle Scholar
  15. 15.
    C. Li, X. Wu, J. H. Chen, and S. van der Zwaag, Mater. Sci. Eng. A, 528 (2011), 5854-60.CrossRefGoogle Scholar
  16. 16.
    M. Ahmed, D. Wexler, G. Casillas, D.G. Savvakin,and E.V. Pereloma, Acta Mater., 104 (2016), 190-200.CrossRefGoogle Scholar
  17. 17.
    C. Li, J. H. Chen, X. Wu, and S. van der Zwaag, Mater. Sci. Eng. A, 573 (2013), 111-18.CrossRefGoogle Scholar
  18. 18.
    T. Akanuma, H. Matsumoto, S. Sato, A. Chiba, I. Inagaki, Y. Shirai, T. Maeda, Scr. Mater., 67 (2012) 21-24.CrossRefGoogle Scholar
  19. 19.
    T. Ahmed and H. J. Rack, J. Mater. Sci. 31 (1996) 4267-76.CrossRefGoogle Scholar
  20. 20.
    K. K. Kharia and H. J. Rack, Metall. Mater. Trans. A, 32 (2001) 671-79.CrossRefGoogle Scholar
  21. 21.
    W. G. Burgers, Physica, 1 (1934) 561-86.CrossRefGoogle Scholar
  22. 22.
    D.G. Savvakin, A. Carman, O. M. Ivasishin, M. Matviychuk, A. A. Gazder, and E.V. Pereloma, Metall. Mater. Trans. A, 43 (2012), 716-23.CrossRefGoogle Scholar
  23. 23.
    M. Ahmed, T. Li, G. Casillas, J. M. Cairney, D. Wexler, and E. V. Pereloma, J. Alloys Compd., 629 (2015) 260-73.CrossRefGoogle Scholar
  24. 24.
    A.A. Gazder, W.-Q. Cao, C.H.J. Davies and E.V. Pereloma, Mater. Sci. Eng. A, 497 (2008) 341-52.CrossRefGoogle Scholar
  25. 25.
    A.A. Gazder, M. Sánchez-Araiza, J.J. Jonas and E.V. Pereloma, Acta Mater., 59 (2011) 4847-65.CrossRefGoogle Scholar
  26. 26.
    R. Hielscher and H. Schaeben, J. Appl. Crystallogr. 41 (2008) 1024-37.CrossRefGoogle Scholar
  27. 27.
    G. Palumbo and K. T. Aust, Acta Metall. Mater. 38 (1990) 2343-52.CrossRefGoogle Scholar
  28. 28.
    R. Kapoor, A. Sarkar, J. Singh, I. Samajdar, and D. Raabe, Scr. Mater., 74 (2014) 72-75.CrossRefGoogle Scholar
  29. 29.
    M. Klimova, S. Zherebtsov, G. Salishchev, and S. L. Semiatin, Mater. Sci. Eng. A, 645 (2015) 292-97.CrossRefGoogle Scholar
  30. 30.
    Y. Takemoto, M. Hida, and A. Sakakibara, J. Jpn. Inst. Metals, 57 (1993), 1471-72.CrossRefGoogle Scholar
  31. 31.
    S. Ishiyama, S. Hanada, and O. Izumi, ISIJ Int., 31 (1991), 807-13.CrossRefGoogle Scholar
  32. 32.
    G. M. Rusakov, A. V. Litvinov, and V. S. Litvinov, Met. Sci. Heat. Treat., 48 (2006), 244-51.CrossRefGoogle Scholar
  33. 33.
    Y. Liu and H. Yang, Materials Science and Engineering: A 260 (1999) 240-45.CrossRefGoogle Scholar
  34. 34.
    A. Bhattacharjee, S. Bhargava, V. K. Varma, S. V. Kamat, and A. K. Gogia, Scr. Mater. 53, (2005) 195-200.CrossRefGoogle Scholar
  35. 35.
    G. B. Olson and M. Cohen, Acta Metall. 27 (1979) 1907-18.CrossRefGoogle Scholar
  36. 36.
    S. Nemat-Nasser, J.-Y. Choi, W.-G. Guo, and J. B. Isaacs, Mechanic Mater. 37 (2005) 287-98.CrossRefGoogle Scholar
  37. 37.
    M. Grujicic, G. B. Olson, and W. S. Owen, Metall. Trans. A, 16 (1985) 1713-22.CrossRefGoogle Scholar
  38. 38.
    J.M. Manero, F.J. Gil, and J.A. Planell, Acta Mater., 48 (2000), 3353-59.CrossRefGoogle Scholar
  39. 39.
    H.C. Rogers, J.P. Hirth, and R.E. Reed-Hill: in Deformation Twinning; Proceedings, R.E. Reed-Hill, J.P. Hirth and H.C. Rogers, eds.,1964.Google Scholar
  40. 40.
    M. Oka and Y. Taniguchi, J. Jpn. Inst. Metal, 42 (1978) 814-20.CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society and ASM International 2016

Authors and Affiliations

  1. 1.School of Mechanical, Materials and Mechatronics EngineeringUniversity of WollongongWollongongAustralia
  2. 2.UOW Electron Microscopy CentreUniversity of WollongongNorth WollongongAustralia

Personalised recommendations