Advertisement

Ionics

, Volume 25, Issue 2, pp 399–410 | Cite as

Effects of Li2TiO3 coating on the structure and the electrochemical properties of LiNi0.5Mn0.5O2 cathode materials at high voltages

  • Guofeng Jia
  • Suqin LiuEmail author
  • Guowei Yang
  • Faqiang Li
  • Kang Wu
  • Zhen He
  • Xuehui Shangguan
Original Paper
  • 35 Downloads

Abstract

To improve the cycle performance, zLi2TiO3@LiNi0.5Mn0.5O2 (z = 0, 1, 3 and 5 mol%) (“@” means “was coated on the surface of”) cathode materials have been successfully prepared via a syn-lithiation strategy. The high-resolution transmission electron microscope (HRTEM) structural analysis results show that Li2TiO3 is evenly coated on the surface of LiNi0.5Mn0.5O2, with the thickness of the coating layer of approximately 10 nm. The electrochemical characterizations of the synthesized zLi2TiO3@LiNi0.5Mn0.5O2 suggest that 1 mol% Li2TiO3@LiNi0.5Mn0.5O2 electrode shows the best electrochemical performance, including the highest capacity and best cycle stability and rate performance. The capacity retention at 25 °C is improved by approximately 23% by the 1 mol% Li2TiO3 coating. The improved cycling performance of LiNi0.5Mn0.5O2 arises from the presence of the Li2TiO3 surface layer, which suppresses the direct contact between the active materials and the electrolytes, enhances the lithium ion diffusion through the electrode/electrolyte interface, expands the BET area, stabilizes the structure and prevents the pulverization of the active materials during repeated charging/discharging. The XPS results showed that Li2TiO3 coating layer could inhibit electrolyte decomposition, and the decomposition of electrolyte on the surface of coating electrode is different from that of LiNi0.5Mn0.5O2 electrode.

Keywords

Lithium–ion batteries LiNi0.5Mn0.5O2 cathode material Li2TiO3 coating BET surface areas High voltage 

Notes

Funding information

This work was supported by the Natural Science Foundation of China (U1507106 and U1507114), the Natural Science Foundation of Qinghai Province (2016-GX-101), the Hunan Provincial Science and Technology Plan Project (Nos. 2016TP1007 and 2017TP1001), and the Science and Technology project of Xining Science and Technology Bureau (2017-G-05).

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

Supplementary material

11581_2018_2832_MOESM1_ESM.docx (8 mb)
ESM 1 (DOCX 8204 kb)

References

  1. 1.
    Chai J, Liu Z, Ma J, Wang J, Liu X, Liu H, Zhang J, Cui G, Chen L (2017) In situ generation of poly(vinylene carbonate) based solid electrolyte with interfacial stability for LiCoO2 lithium batteries. Adv Sci 4.  https://doi.org/10.1002/advs.201600377
  2. 2.
    Tarascon JM, Armand M (2001) Issues and challenges facing rechargeable lithium batteries. Nature 414:359–367CrossRefGoogle Scholar
  3. 3.
    Yang G, Jia G, Shangguan X, Zhu Z, Peng Z, Zhuge Q, Li F, Cui X (2017) The synergistic effects of Li2SiO3-coating and Si4+-doping for LiNi0.5Mn0.5O2 cathode materials on the structure and the electrochemical properties. J Electrochem Soc 164:A2889–A2897CrossRefGoogle Scholar
  4. 4.
    Luo Y, Li HY, Lu TL, Zhang YX, Mao SS, Liu Z, Wen W, Xie JY, Yan LQ (2017) Fluorine gradient-doped LiNi0.5Mn1.5O4 spinel with improved high voltage stability for Li-ion batteries. Electrochim Acta 238:237–245CrossRefGoogle Scholar
  5. 5.
    Li CL, Hou Q, Li SY, Tang FJ, Wang P (2017) Synthesis and properties of nanostructured LiNi1/3Co1/3Mn1/3O2 as cathode with lithium bis(oxalate) borate-based electrolyte to improve cycle performance in Li-ion battery. J Alloys Compd 723:887–893CrossRefGoogle Scholar
  6. 6.
    Guan L, Xiao P, Lv TJ, Zhang DY, Chang CK (2017) Improved electrochemical performance of RbxLi1.27-xCr0.2Mn0.53O2 cathode materials via incorporation of rubidium cations into the original Li sites. J Electrochem Soc 164:A3310–A3318CrossRefGoogle Scholar
  7. 7.
    Li FQ, Yang GW, Jia GF, Shangguan XH, Zhuge Q, Bai B (2017) Improvement in the electrochemical performance of a LiNi0.5Mn0.5O2 cathode material at high voltage. J Appl Electrochem 47:1189–1201Google Scholar
  8. 8.
    Zhao EY, Chen MM, Chen DF, Xiao XL, Hu ZB (2015) A versatile coating strategy to highly improve the electrochemical properties of layered oxide LiMO2 (M = Ni0.5Mn0.5 and Ni1/3Mn1/3Co1/3). ACS Appl Mater Interfaces 7:27096–27105CrossRefGoogle Scholar
  9. 9.
    Sun Y, Ouyang C, Wang Z, Huang X, Chen L (2004) Effect of Co content on rate performance of LiMn[sub 0.5−x]Co[sub 2x]Ni[sub 0.5−x]O[sub 2] cathode materials for lithium-ion batteries. J Electrochem Soc 151:A504CrossRefGoogle Scholar
  10. 10.
    Yang G, Zhao E, Chen M, Cheng Y, Xue L, Hu Z, Xiao X, Li F (2017) Mg doping improving the cycle stability of LiNi0.5Mn0.5O2 at high voltage. J Solid State Electrochem 21:3195–3203Google Scholar
  11. 11.
    Labrini M, Saadoune I, Scheiba F, Almaggoussi A, Elhaskouri J, Amoros P, Ehrenberg H, Brotz J (2013) Magnetic and structural approach for understanding the electrochemical behavior of LiNi0.33Co0.33Mn0.33O2 positive electrode material. Electrochim Acta 111:567–574CrossRefGoogle Scholar
  12. 12.
    Liu FL, Zhang S, Deng C, Wu Q, Zhang M, Meng FL, Gao H, Sun YH (2012) Cobalt content optimization of layered 0.6Li Li1/3Mn2/3 O-2-0.4LiNi(0.5-x)Mn(0.5-x)Co(2x)O(2) (0 <= x <= 0.5) cathode materials prepared by the carbonate coprecipitation. J Electrochem Soc 159:A1591–A1597CrossRefGoogle Scholar
  13. 13.
    Chen M, Zhao E, Chen D, Wu M, Han S, Huang Q, Yang L, Xiao X, Hu Z (2017) Decreasing Li/Ni disorder and improving the electrochemical performances of Ni-rich LiNi0.8Co0.1Mn0.1O2 by Ca doping. Inorg Chem 56:8355–8362CrossRefGoogle Scholar
  14. 14.
    Zhao EY, Hu ZB, Xie L, Chen XP, Xiao XL, Liu XF (2015) A study of the structure-activity relationship of the electrochemical performance and Li/Ni mixing of lithium-rich materials by neutron diffraction. RSC Adv 5:31238–31244CrossRefGoogle Scholar
  15. 15.
    Min K, Seo SW, Song YY, Lee HS, Cho E (2017) A first-principles study of the preventive effects of Al and Mg doping on the degradation in LiNi0.8Co0.1Mn0.1O2 cathode materials. Phys Chem Chem Phys 19:1762–1769CrossRefGoogle Scholar
  16. 16.
    Pang WL, Zhang XH, Guo JZ, Li JY, Yan X, Hou BH, Guan HY, Wu XL (2017) P2-type Na2/3Mn1-xAlxO2 cathode material for sodium-ion batteries: Al-doped enhanced electrochemical properties and studies on the electrode kinetics. J Power Sources 356:80–88CrossRefGoogle Scholar
  17. 17.
    Tu JG, Wu K, Tang H, Zhou HH, Jiao SQ (2017) Mg-Ti co-doping behavior of porous LiFePO4 microspheres for high-rate lithium-ion batteries. J Mater Chem A 5:17021–17028CrossRefGoogle Scholar
  18. 18.
    Guo B, Zhao JH, Fan XM, Zhang W, Li S, Yang ZH, Chen ZX, Zhang WX (2017) Aluminum and fluorine co-doping for promotion of stability and safety of lithium-rich layered cathode material. Electrochim Acta 236:171–179CrossRefGoogle Scholar
  19. 19.
    Wang Y, Yang Z, Qian Y, Gu L, Zhou H (2015) New insights into improving rate performance of lithium-rich cathode material. Adv Mater 27:3915–3920CrossRefGoogle Scholar
  20. 20.
    Yu X, Lyu Y, Gu L, Wu H, Bak S-M, Zhou Y, Amine K, Ehrlich SN, Li H, Nam K-W, Yang X-Q (2014) Understanding the rate capability of high-energy-density Li-rich layered Li1.2Ni0.15Co0.1Mn0.55O2 cathode materials. Adv. Energy Mater 4.  https://doi.org/10.1002/aenm.201300950
  21. 21.
    Kweon HJ, Kim SJ, Park DG (2000) Modification of LixNi1-yCoyO2 by applying a surface coating of MgO. J Power Sources 88:255–261CrossRefGoogle Scholar
  22. 22.
    Hildebrand S, Vollmer C, Winter M, Schappacher FM (2017) Al2O3, SiO2 and TiO2 as coatings for safer LiNi0.8Co0.15Al0.05O2 cathodes: electrochemical performance and thermal analysis by accelerating rate calorimetry. J Electrochem Soc 164:A2190–A2198CrossRefGoogle Scholar
  23. 23.
    Inamoto J, Fukutsuka T, Miyazaki K, Abe T (2017) Insight into the state of the ZrO2 coating on a LiCoO2 thin-film electrode using the ferrocene redox reaction. J Appl Electrochem 47:1203–1211CrossRefGoogle Scholar
  24. 24.
    Patel RL, Palaparty SA, Liang XH (2017) Ultrathin conductive CeO2 coating for significant improvement in electrochemical performance of LiMn1.5Ni0.5O4 cathode materials. J Electrochem Soc 164:A6236–A6243CrossRefGoogle Scholar
  25. 25.
    Zhao EY, Liu XF, Hu ZB, Sun LM, Xiao XL (2015) Facile synthesis and enhanced electrochemical performances of Li2TiO3-coated lithium-rich layered Li1.13Ni0.30Mn0.57O2 cathode materials for lithium-ion batteries. J Power Sources 294:141–149CrossRefGoogle Scholar
  26. 26.
    Li Y, Zhang Q, Xu T, Wang D, Pan D, Zhao H, Bai Y (2018) LaF3 nanolayer surface modified spinel LiNi0.5Mn1.5O4 cathode material for advanced lithium-ion batteries. Ceram Int 44:4058–4066CrossRefGoogle Scholar
  27. 27.
    Xie J, Zhao J, Liu Y, Wang H, Liu C, Wu T, Hsu P-C, Lin D, Jin Y, Cui Y (2017) Engineering the surface of LiCoO2 electrodes using atomic layer deposition for stable high-voltage lithium ion batteries. Nano Res 10:3754–3764CrossRefGoogle Scholar
  28. 28.
    Kim J-K, Choi J-W, Cheruvally G, Kim J-U, Ahn J-H, Cho G-B, Kim K-W, Ahn H-J (2007) A modified mechanical activation synthesis for carbon-coated LiFePO4 cathode in lithium batteries. Mater Lett 61:3822–3825CrossRefGoogle Scholar
  29. 29.
    Xiong QQ, Lou JJ, Teng XJ, Lu XX, Liu SY, Chi HZ, Ji ZG (2018) Controllable synthesis of N-C@LiFePO4 nanospheres as advanced cathode of lithium ion batteries. J Alloys Compd 743:377–382CrossRefGoogle Scholar
  30. 30.
    Zhao E, Chen M, Chen D, Xiao X, Hu Z (2015) A versatile coating strategy to highly improve the electrochemical properties of layered oxide LiMO(2) (M = Ni0.5Mn0.5 and Ni1/3Mn1/3Co1/3). ACS Appl Mater Interfaces 7:27096–27105CrossRefGoogle Scholar
  31. 31.
    Zhao E, Liu X, Zhao H, Xiao X, Hu Z (2015) Ion conducting Li2SiO3-coated lithium-rich layered oxide exhibiting high rate capability and low polarization. Chem Commun (Camb) 51:9093–9096CrossRefGoogle Scholar
  32. 32.
    Xia H, Meng YS, Lai MO, Lu L (2010) Structural and electrochemical properties of LiNi0.5Mn0.5O2 thin-film electrodes prepared by pulsed laser deposition. J Electrochem Soc 157:A348–A354Google Scholar
  33. 33.
    Reimers JN, Dahn JR (1992) Electrochemical and insitu x-ray-diffraction studies of lithium intercalation in lixcoo2. J Electrochem Soc 139:2091–2097CrossRefGoogle Scholar
  34. 34.
    Zhang J, Gao R, Sun L, Zhang H, Hu Z, Liu X (2016) Unraveling the multiple effects of Li 2 ZrO 3 coating on the structural and electrochemical performances of LiCoO 2 as high-voltage cathode materials. Electrochim Acta 209:102–110CrossRefGoogle Scholar
  35. 35.
    Chen J, Tan X, Liu H, Guo L, Zhang J, Jiang Y, Zhang J, Wang H, Feng X, Chu W (2017) Understanding the underlying mechanism of the enhanced performance of Si doped LiNi0.5Mn0.5-xSixO2 cathode material. Electrochim. Acta 228:167–174CrossRefGoogle Scholar
  36. 36.
    Lee WW, Lee J-M (2014) Novel synthesis of high performance anode materials for lithium-ion batteries (LIBs). J Mater Chem A 2:1589–1626CrossRefGoogle Scholar
  37. 37.
    Wu N, Wu H, Liu H, Zhang Y (2016) Solvothermal coating LiNi0.8Co0.15Al0.05O2 microspheres with nanoscale Li2TiO3 shell for long lifespan Li-ion battery cathode materials. J. Alloys Compd 665:48–56CrossRefGoogle Scholar
  38. 38.
    Xiaoling C, Fengjuan T, Chunlei L, Yu Z, Peng W, Shiyou L (2016) Pretreatment of graphite anodes with lithium sulfate to improve the cycle performance of lithium-ion batteries. J Energy Technol 4:1–9CrossRefGoogle Scholar
  39. 39.
    Cho J, Kim YJ, Park B (2001) LiCoO2 cathode material that does not show a phase transition from hexagonal to monoclinic phase. J Electrochem Soc 148:A1110–A1115CrossRefGoogle Scholar
  40. 40.
    Nobili F, Dsoke S, Minicucci M, Croce F, Marassi R (2006) Correlation of AC-impedance and in situ X-ray spectra of LiCoO2. J Phys Chem B 110:11310–11313CrossRefGoogle Scholar
  41. 41.
    Meng K, Wang Z, Guo H, Li X, Wang D (2016) Improving the cycling performance of LiNi0.8Co0.1Mn0.1O2 by surface coating with Li 2 TiO 3. Electrochim. Acta 211:822–831CrossRefGoogle Scholar
  42. 42.
    Fu J, Mu D, Wu B, Bi J, Liu X, Peng Y, Li Y, Wu F (2017) Enhanced electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode at high cutoff voltage by modifying electrode/electrolyte interface with lithium metasilicate. Electrochim. Acta 246:27–34CrossRefGoogle Scholar
  43. 43.
    Li W, Xiao A, Lucht BL, Smart MC, Ratnakumar BV (2008) Surface analysis of electrodes from cells containing electrolytes with stabilizing additives exposed to high temperature. J Electrochem Soc 155:A648–A657CrossRefGoogle Scholar
  44. 44.
    Olivares RU, Oda T, Oya Y, Tanaka S, Tsuchiya K (2005) Behavior of Li2TiO3 under varied surface condition. Fusion Eng Des 75-79:765–768CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • Guofeng Jia
    • 1
    • 2
    • 3
  • Suqin Liu
    • 1
    • 4
    Email author
  • Guowei Yang
    • 2
    • 3
    • 5
  • Faqiang Li
    • 2
    • 3
  • Kang Wu
    • 2
    • 3
    • 5
  • Zhen He
    • 1
    • 4
  • Xuehui Shangguan
    • 2
    • 3
    • 5
  1. 1.College of Chemistry and Chemical Engineering, Hunan Provincial Key Laboratory of Chemical Power Sources, and Hunan Provincial Key Laboratory of Efficient and Clean Utilization of Manganese ResourcesCentral South UniversityChangshaPeople’s Republic of China
  2. 2.Key Laboratory of Comprehensive and Highly Efficient Utilization of Salt Lake Resources, Qinghai Institute of Salt LakesChinese Academy of SciencesXiningPeople’s Republic of China
  3. 3.Key Laboratory of Salt Lake Resources Chemistry of Qinghai provinceXiningPeople’s Republic of China
  4. 4.Hunan Provincial Key Laboratory of Efficient and Clean Utilization of Manganese ResourcesChangshaPeople’s Republic of China
  5. 5.University of Chinese Academy of SciencesBeijingPeople’s Republic of China

Personalised recommendations