In the present work, porous electrode materials lanthanum strontium manganate (LSM)-gadolinium-doped cerium oxide (CGO) and electrochemical cells LSM-CGO + CGO were fabricated via the processes of slurry preparation, tape casting and lamination, and sintering. Graphite, wheat starch, and polyamide powders were used as pore formers, respectively, in order to investigate their effects on shrinkage, flow rate, porosity, and average pore size of the sintered samples. The observation from scanning electronic microscope (SEM) revealed different microstructures caused by different pore formers. Porous, flat, and crack-free electrochemical cells were successfully achieved using the present ceramic processing route. The produced cells could potentially be used for flue gas purification.
Electrodes Electrolyses Materials preparations
This is a preview of subscription content, log in to check access
This work is supported by the Strategic Research Council of Denmark with Risø's project number of 1635123-00.
Bredikhin S, Matsuda K, Maeda K, Awano M (2002) Novel low voltage electrochemical cell for NO decomposition. Solid State Ion 149:327–333CrossRefGoogle Scholar
Bredikhin S, Maeda K, Awano M (2002) Low current density electrochemical cell for NO decomposition. Solid State Ion 152–153:727–733CrossRefGoogle Scholar
Tabata K, Fukuda H, Kohiki S, Mizuno N, Misono M (1988) Uptake of NO gas by YBa2Cu3Oy. Chemistry Letters 17:799–802CrossRefGoogle Scholar
Christensen H, Rak ZS (2002) A novel diesel particulate converter. Catal Today 75:451–457CrossRefGoogle Scholar
Kammer K (2005) Electrochemical DeNOx in solid electrolyte cells—an overview. Appl Catal B58:33–39CrossRefGoogle Scholar
He Z, Ma J (2003) Constitutive modeling of the densification of micron-grain-sized alumina ceramics. Philos Mag 83:1889–1916CrossRefGoogle Scholar
Vasconcelos PV, Labrincha JA, Ferreira JMF (2000) Permeability of diatomite layers processed by different colloidal techniques. J Eur Ceram Soc 20:201–207CrossRefGoogle Scholar
Vasconcelos PV, Labrincha JA, Ferreira JMF (1998) Porosity development of diatomite layers processed by tape casting. Ceram Int 24:447–454CrossRefGoogle Scholar
Bredikhin S, Maeda K, Awano M (2001) NO decomposition by an electrochemical cell with mixed oxide working electrode. Solid State Ion 144:1–9CrossRefGoogle Scholar
Wang S, Awano M, Maeda K (2003) Synthesis and characterization of dense NiO-(CGO) cathode interlayer for electrocatalytic reduction of NO. J Electrochem Soc 150:D209–D214CrossRefGoogle Scholar