Acta Geotechnica

, Volume 13, Issue 2, pp 243–265 | Cite as

Modeling competing hydraulic fracture propagation with the extended finite element method

  • Fushen Liu
  • Peter A. Gordon
  • Dakshina M. Valiveti
Research Paper

Abstract

We present an extended finite element framework to numerically study competing hydraulic fracture propagation. The framework is capable of modeling fully coupled hydraulic fracturing processes including fracture propagation, elastoplastic bulk deformation and fluid flow inside both fractures and the wellbore. In particular, the framework incorporates the classical orifice equation to capture fluid pressure loss across perforation clusters linking the wellbore with fractures. Dynamic fluid partitioning among fractures during propagation is solved together with other coupled factors, such as wellbore pressure loss (\(\Delta p_w\)), perforation pressure loss (\(\Delta p\)), interaction stress (\(\sigma _\mathrm{int}\)) and fracture propagation. By numerical examples, we study the effects of perforation pressure loss and wellbore pressure loss on competing fracture propagation under plane-strain conditions. Two dimensionless parameters \(\Gamma = \sigma _\mathrm{int}/\Delta p\) and \(\Lambda = \Delta p_w/\Delta p\) are used to describe the transition from uniform fracture propagation to preferential fracture propagation. The numerical examples demonstrate the dimensionless parameter \(\Gamma \) also works in the elastoplastic media.

Keywords

Bulk plasticity Cohesive fracture model Competing hydraulic fractures Extended finite element method Perforation pressure loss Wellbore coupling 

Notes

Acknowledgements

The authors gratefully acknowledge the consultancy of Professor Armando Duarte, University of Illinois, Urbana-Champaign, for 3D fracture modeling with X/GFEM during the development of this work.

References

  1. 1.
    Abbas S, Gordeliy E, Peirce A (2016) Modeling multiple curved fractures connected through a wellbore using a fluid-coupled XFEM algorithm. In: 50th US rock mechanics/geomechanics symposium held in Houston, ARMA16-32, 26–29 June 2016, 9 ppGoogle Scholar
  2. 2.
    Adachi J, Siebrits E, Peirce A, Desroches J (2007) Computer simulation of hydraulic fractures. Int J Rock Mech Mining Sci 44:739–757CrossRefGoogle Scholar
  3. 3.
    Bao J, Liu H, Zhang G, Jin J, Cheng W, Liu J (2017) Fracture propagation laws in staged hydraulic fracturing and their effects on fracture conductivities. Pet Explor Dev 44(2):281–288CrossRefGoogle Scholar
  4. 4.
    Barenblatt GI (1962) The mathematical theory of equilibrium cracks in brittle fracture. Adv Appl Mech 7:55–129MathSciNetCrossRefGoogle Scholar
  5. 5.
    Belytschko T, Mos N, Usui S, Parimi C (2001) Arbitrary discontinuities in finite elements. Int J Numer Meth Eng 50:993–1013CrossRefMATHGoogle Scholar
  6. 6.
    Bunger AP, Jeffrey RG, Zhang X (2013) Constraints on simultaneous growth of hydraulic fractures from multiple perforation clusters in horizontal wells. SPE Hydraulic Fracturing Technology Conference, The Woodlands. SPE 163860Google Scholar
  7. 7.
    Bunger AP, Peirce AP (2014) Numerical simulation of simultaneous growth of multiple interacting hydraulic fractures from horizontal wells. Shale Energy Engineering, pp 201–210 (Shale energy engineering conference 2014, Pittsburgh, Pennsylvania, United States, July 21–23, 2014)Google Scholar
  8. 8.
    Chang X, Shi X, Cheng Y, Han X (2015) The fully coupled fluid flow and geo-mechanics model for simulating simultaneous multiple hydraulic fractures propagation in horizontal wells. In: The 49th US rock mechanics/geomechanics symposium, San Francisco (ARMA 15-607)Google Scholar
  9. 9.
    Coon ET, Shaw BE, Spiegelman M (2011) A Nitsche-extended finite element method for earthquake rupture on complex fault systems. Comput Methods Appl Mech Eng 200:2859–2870MathSciNetCrossRefMATHGoogle Scholar
  10. 10.
    Crump JB, Conway M (1988) Effects of perforation-entry friction on bottom hole treating analysis. J Petrol Technol 40(8):1041–1049CrossRefGoogle Scholar
  11. 11.
    Detournay E (2016) Mechanics of hydraulic fractures. Annu Rev Fluid Mech 48:311–339MathSciNetCrossRefMATHGoogle Scholar
  12. 12.
    Dolbow J, Moës N, Belytschko T (2001) An extended finite element method for modeling crack growth with frictional contact. Comput Methods Appl Mech Eng 190:6825–6846MathSciNetCrossRefMATHGoogle Scholar
  13. 13.
    Duarte CAM, Oden JT (1996) An HP adaptive method using clouds. Comput Methods Appl Mech Eng 139:237–262CrossRefMATHGoogle Scholar
  14. 14.
    Dugdale DS (1960) Yielding of steel sheets containing slits. J Mech Phys Solids 8:100–104CrossRefGoogle Scholar
  15. 15.
    El-Rabaa AM, Shah SN, Lord DL (1997) New perforation pressure loss correlations for limited entry fracturing treatments. SPE 38373, SPE Rocky Mountain Regional Meeting, Casper, WyomingGoogle Scholar
  16. 16.
    Fries TP, Belytschko T (2010) The extended/generalized finite element method: an overview of the method and its applications. Int J Numer Meth Eng 84:253–304MathSciNetMATHGoogle Scholar
  17. 17.
    Garagash DI (2006) Propagation of a plane-strain hydraulic fracture with a fluid lag: early-time solution. Int J Solids Struct 43:5811–5835CrossRefMATHGoogle Scholar
  18. 18.
    Garagash DI (2006) Plane-strain propagation of a fluid-driven fracture during injection and shut-in: asymptotics of large toughness. Eng Fract Mech 73(4):456–481CrossRefGoogle Scholar
  19. 19.
    Garagash DI, Detournay E (2005) Plane-strain propagation of a fluid-driven fracture: small toughness solution. ASME J Appl Mech 72:916–928CrossRefMATHGoogle Scholar
  20. 20.
    Gordeliy E, Detournay E (2011) A fixed grid algorithm for simulating the propagation of a shallow hydraulic fracture with a fluid lag. Int J Numer Anal Meth Geomech 35:602–629CrossRefMATHGoogle Scholar
  21. 21.
    Gordeliy E, Peirce A (2013) Coupling schemes for modeling hydraulic fracture propagation using the XFEM. Comput Methods Appl Mech Eng 253:305–322MathSciNetCrossRefMATHGoogle Scholar
  22. 22.
    Gupta P, Duarte CA (2014) Simulation of non-planar three-dimensional hydraulic fracture propagation. Int J Numer Anal Meth Geomech 38:1397–1430CrossRefGoogle Scholar
  23. 23.
    Gupta P, Duarte CA (2016) Coupled formulation and algorithms for the simulation of non-planar three-dimensional hydraulic fractures using the generalized finite element method. Int J Numer Anal Meth Geomech 40:1402–1437CrossRefGoogle Scholar
  24. 24.
    Gupta P, Duarte CA, Dhankhar A (2017) Accuracy and robustness of SIF extraction methods for the generalized/extended finite element method. Eng Fract Mech 179:120–153CrossRefGoogle Scholar
  25. 25.
    Haghighat E, Pietruszczak S (2015) On modeling of discrete propagation of localized damage in cohesive-frictional materials. Int J Numer Anal Meth Geomech 39:1774–1790CrossRefGoogle Scholar
  26. 26.
    Hillerborg A, Modeer M, Petersson PE (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cem Concr Res 6:773–781CrossRefGoogle Scholar
  27. 27.
    Hunsweck MJ, Shen Y, Lew AJ (2013) A finite element approach to the simulation of hydraulic fractures with lag. Int J Numer Anal Meth Geomech 37:993–1015CrossRefGoogle Scholar
  28. 28.
    Kumar D, Ghassemi A (2016) A three-dimensional analysis of simultaneous and sequential fracturing of horizontal wells. J Petrol Sci Eng 146:1006–1025CrossRefGoogle Scholar
  29. 29.
    Lecampion B (2009) An extended finite element method for hydraulic fracture problems. Commun Numer Methods Eng 25:121–133MathSciNetCrossRefMATHGoogle Scholar
  30. 30.
    Lecampion B, Desroches J (2015) Simultaneous initiation and growth of multiple radial hydraulic fractures from a horizontal wellbore. J Mech Phys Solids 82:235–258MathSciNetCrossRefGoogle Scholar
  31. 31.
    Liu F, Borja RI (2008) A contact algorithm for frictional crack propagation with the extended finite element method. Int J Numer Meth Eng 76:1489–1512MathSciNetCrossRefMATHGoogle Scholar
  32. 32.
    Liu F, Borja RI (2009) An extended finite element framework for slow-rate frictional faulting with bulk plasticity and variable friction. Int J Numer Anal Meth Geomech 33:1535–1560CrossRefMATHGoogle Scholar
  33. 33.
    Liu F, Borja RI (2010) Finite deformation formulation for embedded frictional crack with the extended finite element method. Int J Numer Meth Eng 82:773–804MathSciNetMATHGoogle Scholar
  34. 34.
    Liu F, Borja RI (2010) Stabilized low-order finite elements for frictional contact with the extended finite element method. Comput Methods Appl Mech Eng 199:2456–2471MathSciNetCrossRefMATHGoogle Scholar
  35. 35.
    Liu F, Borja RI (2013) Extended finite element framework for fault rupture dynamics including bulk plasticity. Int J Numer Anal Meth Geomech 37:3087–3111CrossRefGoogle Scholar
  36. 36.
    Liu F, Gordon PA, Meier HA, Valiveti DM (2017) A stabilized extended finite element framework for hydraulic fracturing simulations. Int J Numer Anal Meth Geomech 41(5):654–681CrossRefGoogle Scholar
  37. 37.
    Liu F, Valiveti DM, Gordon PA (2015) Modeling fluid-driven fractures using the generalized finite element method. In: The 49th U.S. symposium on rock mechanics/geomechanics symposium at San Francisco 2015; ARMA-2015-120, 9 ppGoogle Scholar
  38. 38.
    Miller CK, Waters GA, Rylander EI (2011) Evaluation of production log data from horizontal wells drilled in organic shales. SPE-144326-MS, North American unconventional gas conference and exhibition, 14–16 June, 2011, The Woodlands, 23 ppGoogle Scholar
  39. 39.
    Mohammadnejad T, Andrade JE (2016) Numerical modeling of hydraulic fracture propagation, closure and reopening using XFEM with application to in-situ stress estimation. Int J Numer Anal Meth Geomech 40:2033–2060CrossRefGoogle Scholar
  40. 40.
    Moës N, Dolbow J, Belytschko T (1999) A finite element method for crack growth without remeshing. Int J Numer Meth Eng 46:131–150CrossRefMATHGoogle Scholar
  41. 41.
    Needleman A (1987) A continuum model for void nucleation by inclusion debonding. J Appl Mech 54:525–531CrossRefMATHGoogle Scholar
  42. 42.
    Olson JE, ADahi T (2009) Modeling simultaneous growth of multiple hydraulic fractures and their interaction with natural fractures. SPE 119739Google Scholar
  43. 43.
    Papanastasiou P (1997) The influence of plasticity in hydraulic fracturing. Int J Fract 84(1):61–79MathSciNetCrossRefGoogle Scholar
  44. 44.
    Papanastasiou P (1999) An efficient algorithm for propagating fluid-driven fractures. Comput Mech 24:258–267CrossRefMATHGoogle Scholar
  45. 45.
    Papanastasiou P (1999) The effective fracture toughness in hydraulic fracturing. Int J Fract 96(2):127–147CrossRefGoogle Scholar
  46. 46.
    Pierrès E, Baietto MC, Gravouil A (2010) A two-scale extended finite element method for modeling 3D crack growth with interfacial contact. Comput Methods Appl Mech Eng 199:1165–1177CrossRefMATHGoogle Scholar
  47. 47.
    Ren Q, Dong Y, Yu T (2009) Numerical modeling of concrete hydraulic fracturing with extended finite element method. Sci China Ser E Technol Sci 52:559–565CrossRefMATHGoogle Scholar
  48. 48.
    Roussel NP, Sharma MM (2011) Optimizing fracture spacing and sequencing in horizontal-well fracturing. SPE Prod Oper 26(2):173–184 (SPE-127986-PA)CrossRefGoogle Scholar
  49. 49.
    Shi F, Wang X, Liu C, Liu H, Wu H (2017) An XFEM-based method with reduction technique for modeling hydraulic fracture propagation in formations containing frictional natural fractures. Eng Fract Mech 173:64–90CrossRefGoogle Scholar
  50. 50.
    Sobhaniaragh B, Mansur WJ, Peters FC (2016) Three-dimensional investigation of multiple stage hydraulic fracturing in unconventional reservoirs. J Petrol Sci Eng 146:1063–1078CrossRefGoogle Scholar
  51. 51.
    de Souza Neto EA, Peric D, Owen DRJ (2008) Computational methods for plasticity theory and applications. Wiley, New YorkCrossRefGoogle Scholar
  52. 52.
    Taghichian A, Zaman M, Devegowda D (2014) Stress shadow size and aperture of hydraulic fractures in unconventional shales. J Petrol Sci Eng 124:209–221CrossRefGoogle Scholar
  53. 53.
    Valiveti DM, Meier HA, Liu F, Gordon PA (2015) Numerical simulation of 3D hydraulic fractures in poro-elastic rocks. In: Proceedings of 13th congress of rock mechanics, Montreal. International Society for Rock Mechanics (ISRM), 10 ppGoogle Scholar
  54. 54.
    Wang H (2015) Numerical modeling of non-planar hydraulic fracture propagation in brittle and ductile rocks using XFEM with cohesive zone method. J Petrol Sci Eng 135:127–140CrossRefGoogle Scholar
  55. 55.
    Wang H (2016) Numerical investigation of fracture spacing and sequencing effects on multiple hydraulic fracture interference and coalescence in brittle and ductile reservoir rocks. Eng Fract Mech 157:107–124CrossRefGoogle Scholar
  56. 56.
    Wang H (2016) Poro-elasto-plastic modeling of complex hydraulic fracture propagation: simultaneous multi-fracturing and producing well interference. Acta Mech 227:507–525MathSciNetCrossRefMATHGoogle Scholar
  57. 57.
    Warpinski NR, Branagan PT (1989) Altered-stress fracturing. J Petrol Technol 41(9):990–997 (SPE 17533)CrossRefGoogle Scholar
  58. 58.
    Weijers L, Wright CA, Sugiyama H, Sato K, Zhigang L (2000) Simultaneous propagation of multiple hydraulic fractures evidence, impact and modeling implications (SPE 64772). In: International oil and gas conference and exhibition in China, held in Beijing, 7–10 November 2000Google Scholar
  59. 59.
    Wells GN, Sluys LJ (2001) A new method for modelling cohesive cracks using finite elements. Int J Numer Meth Eng 50:2667–2682CrossRefMATHGoogle Scholar
  60. 60.
    Wheaton B, Miskimins J, Wood D, Lowe T, Barree R (2014) Integration of distributed temperature and distributed acoustic survey results with hydraulic fracture modeling: a case study in the Woodford Shale, SPE-2014-1922140-MS, unconventional resources technology conference, 25–27 August, 2014. Denver 14 ppGoogle Scholar
  61. 61.
    Wu K, Olson JE (2015) Simultaneous multifracture treatments: fully coupled fluid flow and fracture mechanics for horizontal wells. SPE J 20(2):337–346 (SPE 167626)CrossRefGoogle Scholar
  62. 62.
    Wu K, Olson JE (2016) Mechanisms of simultaneous hydraulic fracture propagation from multiple perforation clusters in horizontal wells. SPE J 21(3):1000–1008 (SPE 178925)CrossRefGoogle Scholar
  63. 63.
    Wu K, Olson JE, Balhoff MT, Yu W (2016) Numerical analysis for promoting uniform development of simultaneous multiple-fracture propagation in horizontal wells. SPE Production & Operations, SPE-174869-PAGoogle Scholar
  64. 64.
    Zeeb C, Konietzky H (2015) Simulating the hydraulic stimulation of multiple fractures in an anisotropic stress field applying the discrete element method. European geosciences union general assembly 2015. EGU, Division Energy, Resources & Environment, ERE. Energy Proc 76:264–272Google Scholar
  65. 65.
    Zhao J, Chen X, Li Y, Fu B (2016) Simulation of simultaneous propagation of multiple hydraulic fractures in horizontal wells. J Petrol Sci Eng 147:788–800CrossRefGoogle Scholar
  66. 66.
    Zi G, Belytschko T (2003) New crack-tip elements for XFEM and applications to cohesive cracks. Int J Numer Meth Eng 57:2221–2240CrossRefMATHGoogle Scholar
  67. 67.
    Zielonka MG, Searles KH, Ning J, Buechler SR (2014) Development and validation of fully-coupled hydraulic fracturing simulation capabilities. In: SIMULIA Community Conference, 31 ppGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany 2017

Authors and Affiliations

  1. 1.Corporate Strategic ResearchExxonMobil Research and Engineering CompanyAnnandaleUSA
  2. 2.ExxonMobil Upstream Research CompanySpringUSA

Personalised recommendations