Springer Nature is making SARS-CoV-2 and COVID-19 research free. View research | View latest news | Sign up for updates

# LEM-DEM coupling for slope stability analysis

• 73 Accesses

## Abstract

Slope stability analysis is a keen area of interest to researchers of geotechnical engineering and geological hazards. To date, the most popular approach applied in slope engineering design is the limit equilibrium method (LEM). However, for this method, some assumptions are required when obtaining the sliding force and the resistance force on the slide face. The discrete element method (DEM) presents an advantage in the calculation of the interaction forces between adjacent blocks without assumptions. This paper introduces a new slope stability analysis based on coupling of both approaches, herein referred to as LEM-DEM. The main LEM-DEM procedure is to transform the slice model of a slope in LEM into the DEM model and obtain the sliding force and the resistance force to calculate the factor of stability (Fos). The sensitivity analysis of the parameters in DEM, such as normal and shear stiffness, was conducted to illustrate that LEM-DEM suggests higher contact stiffness. A comparison between the Fos values in DEM and LEM-DEM was also conducted to indicate the rationality and advantages of LEM-DEM, especially for a gentle slope with a changing shear force direction in the slice model where the interslice forces in LEM are unreasonable. Furthermore, this study carried out a 3D landslide stability analysis extension, along with the results, for the proposed method.

This is a preview of subscription content, log in to check access.

## References

1. 1

Liu S Y, Shao L T, Li H J. Slope stability analysis using the limit equilibrium method and two finite element methods. Comput Geotechnics, 2015, 63: 291–298

2. 2

Cundall P A, Strack O D L. A discrete numerical model for granular assemblies. Géotechnique, 1979, 29: 47–65

3. 3

Andersen S, Andersen L. Modelling of landslides with the materialpoint method. Comput Geosci, 2010, 14: 137–147

4. 4

Nonoyama H, Moriguchi S, Sawada K, et al. Slope stability analysis using smoothed particle hydrodynamics (SPH) method. Soils Found, 2015, 55: 458–470

5. 5

Zienkiewicz O C, Humpheson C, Lewis R W. Associated and nonassociated visco-plasticity and plasticity in soil mechanics. Géotechnique, 1900, 25: 671–689

6. 6

Cheng Y M, Lansivaara T, Wei W B. Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods. Comput Geotech, 2007, 34: 137–150

7. 7

Griffiths D V, Lane P A. Slope stability analysis by finite elements. Géotechnique, 1999, 49: 387–403

8. 8

Zheng H, Liu D F, Li C G. Slope stability analysis based on elastoplastic finite element method. Int J Numer Meth Engng, 2005, 64: 1871–1888

9. 9

Cui Y, Nouri A, Chan D, et al. A new approach to DEM simulation of sand production. J Pet Sci Eng, 2016, 147: 56–67

10. 10

Cui Y, Chan D, Nouri A. Coupling of solid deformation and pore pressure for undrained deformation-a discrete element method approach. Int J Numer Anal Methods Geomech, 2017, 41: 1943–1961

11. 11

Scholtès L, Donzé F V. A DEM analysis of step-path failure in jointed rock slopes. Comptes Rendus Mécanique, 2015, 343: 155–165

12. 12

Katz O, Morgan J K, Aharonov E, et al. Controls on the size and geometry of landslides: Insights from discrete element numerical simulations. Geomorphology, 2014, 220: 104–113

13. 13

Radhakanta K, Debashish C. Discrete element approach for mine dump stability analysis. Min Sci Tech, 2010, 20: 809–813

14. 14

Francioni M, Salvini R, Stead D, et al. A case study integrating remote sensing and distinct element analysis to quarry slope stability assessment in the Monte Altissimo area, Italy. EngGeol, 2014, 183: 290–302

15. 15

Hoomans B P B, Kuipers J A M, van Swaaij W P M. Granular dynamics simulation of segregation phenomena in bubbling gas-fluidised beds. Powder Tech, 2000, 109: 41–48

16. 16

Alemdag S, Kaya A, Karadag M, et al. Utilization of the limit equilibrium and finite element methods for the stability analysis of the slope debris: An example of the Kalebasi District (NE Turkey). J African Earth Sci, 2015, 106: 134–146

17. 17

Stianson J R, Chan D, Fredlund D G. Role of admissibility criteria in limit equilibrium slope stability methods based on finite element stresses. Comput Geotechnics, 2015, 66: 113–125

18. 18

Albataineh N. Slope stability analysis using 2D and 3D methods. Dissertation for Dcotoral Degree. Akron: The University of Akron, 2006

19. 19

Huang C C, Tsai C C. New method for 3D and asymmetrical slope stability analysis. J Geotechnical GeoEnviron Eng, 2000, 126: 917–927

20. 20

Xing Z. Three-dimensional stability analysis of concave slopes in plan view. J Geotechnical Eng, 1988, 114: 658–671

21. 21

Israelsson J I. Short descriptions of UDEC and 3DEC. Develop Geotech Eng, 1996, 79: 523–528

22. 22

Hart R, Cundall P A, Lemos J. Formulation of a three-dimensional distinct element model—Part II. Mechanical calculations for motion and interaction of a system composed of many polyhedral blocks. Int J Rock Mech Min Sci GeoMech Abstracts, 1988, 25: 117–125

23. 23

Schroeder W J, Avila L S, Hoffman W. Visualizing with VTK: A tutorial. IEEE Comput Grap Appl, 2000, 20: 20–27

24. 24

Xu W, Hu R, Yue Z, et al. Genesis and stability of the Zhoujiawan landslide, three gorges, China. Bull Eng Geol Environ, 2009, 68: 47–54

25. 25

Zangerl C, Evans K F, Eberhardt E, et al. Normal stiffness of fractures in granitic rock: A compilation of laboratory and in-situ experiments. Int J Rock Mech Min Sci, 2008, 45: 1500–1507

26. 26

Duncan J M. State of the art: Limit equilibrium and finite-element analysis of slopes. J Geotechnical Eng, 1996, 122: 577–596

27. 27

Akhtar K. Three dimensional slope stability analyses for natural and manmade slopes. Dissert Theses-Gradworks, 2011, 30: 212–218