Advertisement

The effect of pore size and porosity of Ti6Al4V scaffolds on MC3T3-E1 cells and tissue in rabbits

  • HuiQin Luan
  • LiTing Wang
  • WeiYan Ren
  • ZhaoWei Chu
  • YunFei Huang
  • ChengLin Lu
  • YuBo FanEmail author
Article
  • 5 Downloads

Abstract

Electron beam melting (EBM) allows the fabrication of specific porous titanium implants, whereas their in vitro and in vivo biological performance should be further investigated. In this study, we examined the porous Ti6Al4V scaffolds (low, 334.1 μm pore size with 55.4% porosity; middle, 383.2 μm pore size with 65.2% porosity; and high, 401.6 μm pore size with 78.1% porosity) fabricated through EBM. The structural characterization and mechanical properties of porous Ti6Al4V scaffolds were measured through micro-computed tomography (micro-CT), scanning electron microscopy, and a material testing system. MC3T3-E1 cells were used to assess the proliferation and differentiation of the cells on different scaffolds at day 7 and day 14 based on the expression levels of genes, including alkaline phosphatase, bone morphogenetic protein-2, osteopontin and runtrelated transcription factor-2. Rabbits with distal femoral defects were utilized to evaluate bone ingrowth in the porous titanium. All of the samples were subjected to micro-CT and histological analysis after 12 weeks. Results showed that compressive Young’s modulus of 0.3–1.1 GPa was similar to the trabecular bone. The three types of porous Ti6Al4V scaffolds were inclined to promote cell proliferation, whereas cell differentiation and bone ingrowth into the porous scaffolds were biased to the porous titanium with relatively large pores and porosity (middle and high). This study implied that the present porous implant design, which had the combined advantages of different pore sizes and porosity, might be meaningful and promising for trabecular bone defect restoration.

Keywords

pore size porosity porous titanium alloy scaffolds osteogenesis bone defect 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Clavell R S, de Llano J J M, Carda C, et al. In vitro assessment of the biological response of Ti6Al4V implants coated with hydroxyapatite microdomains. J Biomed Mater Res, 2016, 104: 2723–2729CrossRefGoogle Scholar
  2. 2.
    Li X, Gao P, Wan P, et al. Novel Bio-functional magnesium coating on porous Ti6Al4V orthopaedic implants: In vitro and in vivo study. Sci Rep, 2017, 7: 40755CrossRefGoogle Scholar
  3. 3.
    Murphy C M, Haugh M G, O’Brien F J. The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering. Biomaterials, 2010, 31: 461–466CrossRefGoogle Scholar
  4. 4.
    Minagar S, Wang J, Berndt C C, et al. Cell response of anodized nanotubes on titanium and titanium alloys. J Biomed Mater Res, 2013, 101A: 2726–2739CrossRefGoogle Scholar
  5. 5.
    Drago C, Howell K. Concepts for designing and fabricating metal implant frameworks for hybrid implant prostheses. J Prosthodontics, 2012, 21: 413–424CrossRefGoogle Scholar
  6. 6.
    Sachlos E, Czernuszka J T. Making tissue engineering scaffolds work. Review on the application of solid freeform fabrication technology to the production of tissue engineering scaffolds. Eur Cell Mater, 2003, 5: 29–40Google Scholar
  7. 7.
    Alvarez K, Nakajima H. Metallic scaffolds for bone regeneration. Materials, 2009, 2: 790–832CrossRefGoogle Scholar
  8. 8.
    Ponader S, von Wilmowsky C, Widenmayer M, et al. In vivo performance of selective electron beam-melted Ti-6Al-4V structures. J Biomed Mater Res, 2010, 92A: 56–62CrossRefGoogle Scholar
  9. 9.
    Zhao L, Wei Y, Li J, et al. Initial osteoblast functions on Ti-5Zr-3Sn-5Mo-15Nb titanium alloy surfaces modified by microarc oxidation. J Biomed Mater Res, 2010, 92: 432–440Google Scholar
  10. 10.
    Li X, Feng Y F, Wang C T, et al. Evaluation of biological properties of electron beam melted Ti6Al4V implant with biomimetic coating in vitro and in vivo. PLoS ONE, 2012, 7: e52049Google Scholar
  11. 11.
    Van Bael S, Kerckhofs G, Moesen M, et al. Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures. Mater Sci Eng-A, 2011, 528: 7423–7431CrossRefGoogle Scholar
  12. 12.
    Van Bael S, Chai Y C, Truscello S, et al. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. Acta Biomater, 2012, 8: 2824–2834CrossRefGoogle Scholar
  13. 13.
    Vaithilingam J, Prina E, Goodridge R D, et al. Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications. Mater Sci Eng-C, 2016, 67: 294–303CrossRefGoogle Scholar
  14. 14.
    Van Hooreweder B, Apers Y, Lietaert K, et al. Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting. Acta Biomater, 2017, 47: 193–202CrossRefGoogle Scholar
  15. 15.
    Nune K C, Li S, Misra R D K. Advancements in three-dimensional titanium alloy mesh scaffolds fabricated by electron beam melting for biomedical devices: Mechanical and biological aspects. Sci China Mater, 2018, 61: 455–474CrossRefGoogle Scholar
  16. 16.
    Teixeira L N, Crippa G E, Lefebvre L P, et al. The influence of pore size on osteoblast phenotype expression in cultures grown on porous titanium. Int J Oral Maxillofacial Surgery, 2012, 41: 1097–1101CrossRefGoogle Scholar
  17. 17.
    Heinl P, Müller L, Körner C, et al. Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomater, 2008, 4: 1536–1544CrossRefGoogle Scholar
  18. 18.
    Markhoff J, Wieding J, Weissmann V, et al. Influence of different three-dimensional open porous titanium scaffold designs on human osteoblasts behavior in static and dynamic cell investigations. Materials, 2015, 8: 5490–5507CrossRefGoogle Scholar
  19. 19.
    Dabrowski B, Swieszkowski W, Godlinski D, et al. Highly porous titanium scaffolds for orthopaedic applications. J Biomed Mater Res, 2010, 95B: 53–61Google Scholar
  20. 20.
    Mahmoud S, Eldeib A, Samy S. The design of 3D scaffold for tissue engineering using automated scaffold design algorithm. Australas Phys Eng Sci Med, 2015, 38: 223–228CrossRefGoogle Scholar
  21. 21.
    Chen J, Paetzell E, Zhou J, et al. Osteoblast-like cell ingrowth, adhesion and proliferation on porous Ti-6Al-4V with particulate and fiber scaffolds. Mater Sci Eng-C, 2010, 30: 647–656CrossRefGoogle Scholar
  22. 22.
    Karageorgiou V, Kaplan D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials, 2005, 26: 5474–5491CrossRefGoogle Scholar
  23. 23.
    Xue W, Krishna B V, Bandyopadhyay A, et al. Processing and biocompatibility evaluation of laser processed porous titanium. Acta Biomater, 2007, 3: 1007–1018CrossRefGoogle Scholar
  24. 24.
    Thomsen P, Malmström J, Emanuelsson L, et al. Electron beammelted, free-form-fabricated titanium alloy implants: Material surface characterization and early bone response in rabbits. J Biomed Mater Res, 2008, 90B: 35–44CrossRefGoogle Scholar
  25. 25.
    American Society for Testing and Materials Testing International. Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants. ASTM F1854-15, 2015Google Scholar
  26. 26.
    Goldstein S A. The mechanical properties of trabecular bone: Dependence on anatomic location and function. J BioMech, 1987, 20: 1055–1061CrossRefGoogle Scholar
  27. 27.
    Li S, Li X, Hou W, et al. Fabrication of open-cellular (porous) titanium alloy implants: Osseointegration, vascularization and preliminary human trials. Sci China Mater, 2018, 61: 525–536CrossRefGoogle Scholar
  28. 28.
    Parthasarathy J, Starly B, Raman S, et al. Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). J Mech Behav BioMed Mater, 2010, 3: 249–259CrossRefGoogle Scholar
  29. 29.
    Wang J, Li Y C, Wang F, et al. Relationship between mineral density and elastic modulus of human cancellous bone. J Medical Biomech, 2014, 29: 465–470MathSciNetGoogle Scholar
  30. 30.
    Knychala J, Bouropoulos N, Catt C J, et al. Pore geometry regulates early stage human bone marrow cell tissue formation and organisation. Ann Biomed Eng, 2013, 41: 917–930CrossRefGoogle Scholar
  31. 31.
    Rumpler M, Woesz A, Dunlop J W C, et al. The effect of geometry on three-dimensional tissue growth. J R Soc Interface, 2008, 5: 1173–1180CrossRefGoogle Scholar
  32. 32.
    Xiang R, Luo G, Yang Z, et al. Large area growth of aligned CNT arrays on spheres: Cost performance and product control. Mater Lett, 2009, 63: 84–87CrossRefGoogle Scholar
  33. 33.
    Cukierman E, Pankov R, Stevens D R, et al. Taking cell-matrix adhesions to the third dimension. Science, 2001, 294: 1708–1712CrossRefGoogle Scholar
  34. 34.
    Lim J Y, Donahue H J. Cell sensing and response to micro-and nanostructured surfaces produced by chemical and topographic patterning. Tissue Eng, 2007, 13: 1879–1891CrossRefGoogle Scholar
  35. 35.
    Chang B, Song W, Han T, et al. Influence of pore size of porous titanium fabricated by vacuum diffusion bonding of titanium meshes on cell penetration and bone ingrowth. Acta Biomater, 2016, 33: 311–321CrossRefGoogle Scholar
  36. 36.
    Torres-Sanchez C, Al Mushref F R A, Norrito M, et al. The effect of pore size and porosity on mechanical properties and biological response of porous titanium scaffolds. Mater Sci Eng-C, 2017, 77: 219–228CrossRefGoogle Scholar

Copyright information

© Science China Press and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • HuiQin Luan
    • 1
    • 2
  • LiTing Wang
    • 1
    • 2
  • WeiYan Ren
    • 1
    • 2
  • ZhaoWei Chu
    • 1
    • 2
  • YunFei Huang
    • 3
  • ChengLin Lu
    • 4
  • YuBo Fan
    • 1
    • 2
    • 3
    Email author
  1. 1.Key Laboratory of Intelligent Control and Rehabilitation Technology of the Ministry of Civil AffairsNational Research Center for Rehabilitation Technical AidsBeijingChina
  2. 2.Beijing Key Laboratory of Rehabilitation Technical Aids for Old-Age DisabilityBeijingChina
  3. 3.Key Laboratory for Biomechanics and Mechanobiology of Ministry of Education, School of Biological Science and Medical EngineeringBeihang UniversityBeijingChina
  4. 4.Shandong Weigao Orthopedic Device Company LimitedWeihaiChina

Personalised recommendations