An improved ground motion intensity measure for super high-rise buildings
- 311 Downloads
Ground motion intensity measure (IM) is an important part in performance-based seismic design. A reasonable and efficient IM can make the prediction of the structural seismic responses more accurate. Therefore, a more reasonable IM for super high-rise buildings is proposed in this paper. This IM takes into account the significant characteristic that higher-order vibration modes play important roles in the seismic response of super high-rise buildings, as well as the advantages of some existing IMs. The key parameter of the proposed IM is calibrated using a series of time-history analyses. The collapse simulations of two super high-rise buildings are used to discuss the suitability of the proposed IM and some other existing IMs. The results indicate that the proposed IM yields a smaller coefficient of variation for the critical collapse status than other existing IMs and performs well in reflecting the contribution of higher-order vibration modes to the structural response. Hence, the proposed IM is more applicable to seismic design for super high-rise buildings than other IMs.
Keywordsground motion intensity measure super high-rise building time-history analysis collapse analysis
Unable to display preview. Download preview PDF.
- 1.Hamburger R, Rojahn C, Moehle J, et al. The ATC-58project: Development of next-generation performance-based earthquake engineering design criteria for buildings. In: 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1–6, 2004. 1819Google Scholar
- 4.Cordova P P, Deierlein G G, Mehanny S S F, et al. Development of a two-parameter seismic intensity measure and probabilistic assessment procedure. In: The Second U.S.-Japan Workshop on Performance-based Earthquake Engineering Methodology for Reinforced Concrete Building Structures, Sapporo, Japan, 2001. 187–206Google Scholar
- 10.Jiang H J, He L S, Lu X L, et al. Analysis of seismic performance and shaking table tests of the Shanghai Tower (in Chinese). J Building Struct, 2011, 32: 55–63Google Scholar
- 11.Yang X Q, Fu X Y, Huang Y J. Dynamic elasto-plastic analysis of the Shenzhen Ping’an Financial Center Tower (in Chinese). J Building Structs, 2011, 32: 40–49Google Scholar
- 14.Lu X, Lu X Z, Ye L P, et al. Collapse analysis of super high-rise building and discussion on the ground motion intensity measures. In: 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September 24–28, 2012. 0164Google Scholar
- 15.FEMA. Quantification of building seismic performance factors, FEMA P695. Applied Technology Council, Redwood City, C.A., 2009Google Scholar
- 17.Ding J M, Wu H L, Zhao X. Seismic performance analysis and evaluation of Shanghai Tower under Maximum Considered Earthquake (in Chinese). J Civil Architect Environ Eng, 2010, 32: 231–233Google Scholar
- 19.Miranda E, Aslani H. Probabilistic response assessment for building-specific loss estimation. PEER 2003/03, Pacific Earthquake Engineering Research Center, University of California at Berkeley, Berkeley, CA, 2003Google Scholar
- 21.Lu X Z, Zhang W K, Lu X, et al. Elasto-plastic mechanical behavior of detailed finite element model and simplified model of mega columns (in Chinese). J Shenyang Jianzhu University (Natural of Science), 2011, 27: 409–417Google Scholar
- 24.Lu X, Lu X Z, Ye L P. Discussion on the ground motion intensity measures for super high-rise buildings (in Chinese). China Civil Eng J, 2012, 45: 292–296Google Scholar