Carbon footprint and air emissions inventories for US honey production: case studies
- 1.2k Downloads
The primary purpose of this study is to estimate the life cycle greenhouse gas (GHG) emissions (carbon footprint) and criteria pollutant emissions during honey production and processing for US conditions based on several case studies of different scale beekeeping and processing operations. Commercial beekeeping operations yield two coproducts, honey and pollination services. These two products present an interesting coproduct allocation problem since beekeeping operations cannot be clearly subdivided, pollination services do not have a substitutable product or service, and pollination services cannot be characterized by physical properties for value-based allocation. Thus, a secondary purpose is to identify an appropriate allocation method and to discuss how the choice of allocation strategies influences the outcomes.
The commercial honey production supply chain comprises the following two primary steps: raw honey production by beekeepers and honey processing and packaging by processors. A case study approach was used based on detailed operation data provided by several beekeepers and processors from key honey-producing regions in the USA. Process-based life cycle assessment was conducted following the ISO guidelines, and economic allocation was used as a baseline method for coproduct allocation.
Results and discussion
Life cycle modeling of one complete commercial supply chain (raw honey production, transport to a processer, and processing) shows that total life cycle GHG emissions range from 0.67 to 0.92 kg CO2 equivalent/kg of processed honey; however, outcomes show significant variability. Results show commercial honey production emits more GHGs and criteria pollutants than processing. Truck transport of bees is the dominant contributor of both GHG emissions and criteria pollutants within the life cycle of raw honey production. However, honey processing, which depends on natural gas and electricity, contributes a significant fraction of SO x . These results are based on economic allocation among beekeeping coproducts. In addition to economic allocation, subdivision was applied to beekeeping activities. Because hive management (feed and medication) could not be further subdivided, a bounded range was generated for raw honey production, where the lower and upper bounds represent two extremes where all the environmental burdens associated with hive management were allocated to pollination or honey production.
Economic allocation tends to fall near or below the lower bound for the subdivision method. Interestingly, some beekeepers reported that their hive management practices were driven more by demand for pollination services than honey, which seems to be reflected in the coordination of lower-bound subdivision and economic allocation results.
KeywordsBeekeeping Coproduct allocation Food system Hive maintenance Life cycle assessment Transportation
- Cornell University the Master Beekeeper Program (2006) Seasonal bee management calendar. Available from http://www.masterbeekeeper.org/calendar/calendar_one.htm. Accessed July 2010
- Ecoinvent Centre (2007) Ecoinvent Data v2.0. Swiss Center for Life Cycle Assessment, DübendorfGoogle Scholar
- Intergovernmental Panel on Climate Change (2007) IPCC fourth assessment report: climate change 2007—the physical science basis. Cambridge University Press, CambridgeGoogle Scholar
- International Organization for Standardization (2006) ISO 14041. Environmental management – Life cycle assessment – Goal and scope definition and inventory analysis. GenevaGoogle Scholar
- Johnson R (2010) Honey bee colony collapse disorder. Congressional Research Service, WashingtonGoogle Scholar
- Melathopoulos A (2006) Honey as Canada’s sustainable and ethical sweetener. Hivelights 19(2):14–17Google Scholar
- Ministry of Agriculture and Forestry (2001) A review of treatment options for control of varroa mite in New Zealand. HortResearch Client Report No. 2001/249. Ministry of Agriculture and Forestry, Palmerston NorthGoogle Scholar
- Morse RA (2000) The value of honey bees as pollinatiors of U.S. crops in 2000. Bee Culture 128:1–151Google Scholar
- National Renewable Energy Laboratory (2008) U.S. Life-Cycle Inventory Database. Available from http://www.nrel.gov/lci/database/. Accessed June 2010
- PE International (2009) GaBi 4 software-system and databases for life cycle engineering, Leinfelden-Echterdingen, GermanyGoogle Scholar
- PRé Consultants (2008) SimaPro 7.1. Amersfoort, The NetherlandsGoogle Scholar
- Rose BJ, Grabham S (2009) GHG energy calc help. Available from http://www.ghgenergycalc.com.au/freestuff/GHGEnergyCalcHelp.pdf. Accessed August 2010
- Sumner DA, Boriss H (2006) Bee-conomics and the leap in pollination fees. Agricultural and Resource Economics Update 9(3):9–11Google Scholar
- Thomas MG, Schumann DR (1993) Income opportunities in special forest products: self-help suggestions for rural entrepreneurs. United States Department of Agriculture, Washington, DCGoogle Scholar
- USDA (2007) 2007 Census of agriculture—United States data. Other animals and animal products. Washington, DCGoogle Scholar