Advertisement

Environmental Science and Pollution Research

, Volume 26, Issue 4, pp 3803–3813 | Cite as

Preparation of ion exchange resin using soluble starch and acrylamide by graft polymerization and hydrolysis

  • Ming Zhang
  • Guihong LanEmail author
  • Haiyan Qiu
  • Tailiang Zhang
  • Wenjing Li
  • Xiuqiong Hu
Research Article
  • 35 Downloads

Abstract

Based on soluble starch and acrylamide by performing graft polymerization in aqueous solution and hydrolysis step, a low-cost ion exchange resin has been synthesized to remove the heavy metal ions of Cr3+ and Ni2+. The hydrolysis progresses by adding NaOH to convert -CONH2 to -COONa, and the adsorption experiments confirmed that the functional group to adsorb heavy metals is -COO, rather than -CONH2. During the determination of heavy metal adsorption, the Na+ concentration diffused by SR-16 into the solution was also analysed to investigate the ion exchange process. The composition and morphology of SR-16 was characterized by FT-IR, SEM, elemental analyser and EDS, and the results showed that SR-16 has an excellent adsorption capacity to the removal of heavy metal pollution; the adsorption mechanism of SR-16 could be explained by ion exchange progress with -COONa attached on the network structure.

Keywords

Soluble starch Acrylamide Hydrolysis Ion exchange resin Adsorption 

Notes

Acknowledgements

The authors would like to thank the very useful suggestion from the editors and reviewers.

Funding information

The study is financially supported by demonstration project of Sichuan Provincial Science and Technology Department (18ZDYF0051).

References

  1. Aghili S, Vaezihir A, Hosseinzadeh M (2018) Distribution and modeling of heavy metal pollution in the sediment and water mediums of Pakhir River, at the downstream of Sungun mine tailing dump. Iran. Environ Earth Sci 77:128CrossRefGoogle Scholar
  2. An HK, Park BY, Kim DS (2001) Crab shell for the removal of heavy metals from aqueous solution. Water Res 35:3551–3556CrossRefGoogle Scholar
  3. Arslan S, Yücel C, Çallı SS, Celik M (2017) Assessment of heavy metal pollution in the groundwater of the northern Develi Closed Basin, Kayseri, Turkey. Bull Environ Contam Toxicol 99:244–252CrossRefGoogle Scholar
  4. Athawale VD, Lele V (2015) Recent trends in hydrogels based on starch-graft-acrylic acid: a review. Starch-Stärke 53:7–13CrossRefGoogle Scholar
  5. Bawaallah KA, Saliu JK, Otitoloju AA (2018) Integrated assessment of the heavy metal pollution status and potential ecological risk in the Lagos lagoon, south west, Nigeria. Human Ecol Risk Assess 24:377–397CrossRefGoogle Scholar
  6. Beker ÜG, Güner FS, Dizman M, Erciyes AT (2015) Heavy metal removal by ion exchanger based on hydroxyethyl cellulose. J Appl Polym Sci 74:3501–3506CrossRefGoogle Scholar
  7. Cao CY, Qu J, Yan WS, Zhu JF, Wu ZY, Song WG (2012) Low-cost synthesis of flowerlike-α-Fe2O3 nanostructures for heavy metal ion removal: adsorption property and mechanism. Langmuir 28:4573–4579CrossRefGoogle Scholar
  8. Cegłowski M, Schroeder G (2015) Preparation of porous resin with Schiff base chelating groups for removal of heavy metal ions from aqueous solutions. Chem Eng J 263:402–411Google Scholar
  9. Chang GC, Lee K (2002) Preparation of starch-g-polystyrene copolymer by emulsion polymerization. Carbobydr Polym 48:125–130CrossRefGoogle Scholar
  10. El-Bahy SM, El-Bahy ZM (2016) Synthesis and characterization of a new iminodiacetate chelating resin for removal of toxic heavy metal ions from aqueous solution by batch and fixed bed column methods. Korean J Chem Eng 33:2492–2501CrossRefGoogle Scholar
  11. Fei J, Min X, Wang Z, Pang Z, Liang Y, Ke Y (2017) Health and ecological risk assessment of heavy metals pollution in an antimony mining region: a case study from South China. Environ Sci Pollut Res 24:27573–27586CrossRefGoogle Scholar
  12. Fu F, Wang Q (2011) Removal of heavy metal ions from wastewaters: a review. J Environ Manag 92:407–418CrossRefGoogle Scholar
  13. Ge Y, Li Z, Yan K, Song QP, Wang KQ (2014) Heavy metal ions retention by bi-functionalized lignin: synthesis, applications, and adsorption mechanisms. J Ind Eng Chem 20:4429–4436CrossRefGoogle Scholar
  14. Hua R, Li ZK (2014) Sulfhydryl functionalized hydrogel with magnetism: synthesis, characterization, and adsorption behavior study for heavy metal removal. Chem Eng J 249:189–200CrossRefGoogle Scholar
  15. Ji GJ, Bao WW, Gao GM, An BC, Zou HF, Gan SC (2010) Removal of Cu (II) from aqueous solution using a novel crosslinked alumina-chitosan hybrid adsorbent. Chin J Chem Eng 20:641–648CrossRefGoogle Scholar
  16. Khalid MI, Farag S, Fattach SAE (2010) Hydrolysis of poly (acrylamide)-starch graft copolymer. J Appl Polym Sci 48:270–275Google Scholar
  17. Kong WJ, Li Q, Liu J, Li XD, Zhao LW, Su Y, Yue QY, Gao BY (2016) Adsorption behavior and mechanism of heavy metal ions by chicken feather protein-based semi-interpenetrating polymer networks super absorbent resin. RSC Adv 6:83234–83243CrossRefGoogle Scholar
  18. Li JM, Zhang LM (2007) Characteristics of novel starch-based hydrogels prepared by UV photopolymerization of acryloylated starch and a zwitterionic monomer. Starch-Stärke 59:418–422CrossRefGoogle Scholar
  19. Mao X, Wang L, Gu S, Duan Y, Zhu Y, Wang C, Lichtfouse E (2018) Synthesis of a three-dimensional network sodium alginate–poly (acrylic acid)/attapulgite hydrogel with good mechanic property and reusability for efficient adsorption of Cu2+ and Pb2+. Environ Chem Lett 16:653–658CrossRefGoogle Scholar
  20. Mostafa KM (1995) Graft polymerization of acrylic acid onto starch using potassium permanganate acid (redox system). J Appl Polym Sci 56:263–269Google Scholar
  21. Najafi M, Yousefi Y, Rafati AA (2012) Synthesis, characterization and adsorption studies of several heavy metal ions on amino-functionalized silica nano hollow sphere and silica gel. Sep Purif Technol 85:193–205CrossRefGoogle Scholar
  22. Ni N, Zhang D, Dumont M (2018) Synthesis and characterization of zein-based superabsorbent hydrogels and their potential as heavy metal ion chelators. Polym Bull 75:31–45CrossRefGoogle Scholar
  23. Peng L, Xu Y, Zhou F, Sun B, Tie B, Lei M, Shao J, Gu J (2016) Enhanced removal of cd (II) by poly (acrylamide-co-sodium acrylate) water-retaining agent incorporated nano hydrous manganese oxide. Mater Des 96:195–202CrossRefGoogle Scholar
  24. Psomiadou E, Arvanitoyannis I, Biliaderis CG, Ogawa H, Kawasaki N (1997) Biodegradable films made from low density polyethylene (LDPE), wheat starch and soluble starch for food packaging applications, part 2. Carbohydr Polym 33:227–242CrossRefGoogle Scholar
  25. Rivas BL, Pooley SA, Muñoz C, Leiton L (2010) Heavy metal ions removal through poly (acrylamide-co-methacrylic acid) resin. Polym Bull 64:41–52CrossRefGoogle Scholar
  26. Rudnicki P, Hubicki Z, Kołodyńska D (2014) Evaluation of heavy metal ions removal from acidic waste water streams. Chem Eng J 252:362–373CrossRefGoogle Scholar
  27. Sawut A, Yimit M, Sun W, Nurulla I (2014) Photopolymerisation and characterization of maleylatedcellulose-g-poly (acrylic acid) superabsorbent polymer. Carbohydr Polym 101:231–239CrossRefGoogle Scholar
  28. Tally M, Atassi Y (2016) Synthesis and characterization of pH-sensitive superabsorbent hydrogels based on sodium alginate-g-poly (acrylic acid-co-acrylamide) obtained via an anionic surfactant micelle templating under microwave irradiation. Polym Bull 73:3183–3208CrossRefGoogle Scholar
  29. Vaca MM, Lopez CR, Gehr R, Jimenez CB, Alvarez PJ (2010) Heavy metal removal with Mexican clinoptilolite: multi-component ionic exchange. Water Res 35:373–378CrossRefGoogle Scholar
  30. Wei X, Li C, Wang C, Lin S, Wu J, Guo M (2018) Rapid and destructive adsorption of paraoxon-ethyl toxin via a self-detoxifying hybrid electrospun nanofibrous membrane. Chem Eng J 351:31–39CrossRefGoogle Scholar
  31. Wu F, Tseng R, Juang R (2009) Initial behavior of intraparticle diffusion model used in the description of adsorption kinetics. Chem Eng J 153:1–8CrossRefGoogle Scholar
  32. Wu R, Tian L, Wang W, Man XL (2015) Bifunctional cellulose derivatives for the removal of heavy-metal ions and phenols: synthesis and adsorption studies. J Appl Polym Sci 132(41830):1–9Google Scholar
  33. Wu SP, Dai XZ, Kan JR, Long FDS, Zhu MY (2017) Fabrication of carboxymethyl chitosan–hemicellulose resin for adsorptive removal of heavy metals from wastewater. Chin Chem Lett 28:625–632CrossRefGoogle Scholar
  34. Xu K, Zhang WD, Yue YM, Wang PX (2005) Swelling behaviors of a three-component copolymer (starch graft sodium acrylate and 2-acrylamido-2-methyl-propanosulfonic acid) synthesized by microwave polymerization. J Appl Polym Sci 98:1050–1054Google Scholar
  35. Xu F, Hu B, Li J, Cui R, Liu Z, Jiang Z, Yin X (2018) Reassessment of heavy metal pollution in riverine sediments of Hainan Island, China: sources and risks. Environ Sci Pollut Res 25:1766–1772CrossRefGoogle Scholar
  36. Yan JH, Lan GH, Qiu HY, Chen C, Liu YQ, Du GY, Zhang J (2018) Adsorption of heavy metals and methylene blue from aqueous solution with citric acid modified peach stone. Sep Sci Technol 53:1678–1688CrossRefGoogle Scholar
  37. Zhao XY, Zhu YJ, Zhao J, Lu BQ, Chen F, Qi C, Wu J (2014) Hydroxyapatite nanosheet-assembled microspheres: hemoglobin-templated synthesis and adsorption for heavy metal ions. J Coll Interface Sci 416:11–18CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Ming Zhang
    • 1
  • Guihong Lan
    • 1
    Email author
  • Haiyan Qiu
    • 1
  • Tailiang Zhang
    • 2
  • Wenjing Li
    • 1
  • Xiuqiong Hu
    • 1
  1. 1.College of Chemistry and Chemical EngineeringSouthwest Petroleum UniversityChengduPeople’s Republic of China
  2. 2.Sichuan Kuineng Environmental Protection Technology Co. Ltd.ChengduPeople’s Republic of China

Personalised recommendations