Column with CNT/magnesium oxide composite for lead(II) removal from water
- 3k Downloads
In this study, manganese dioxide-coated multiwall carbon nanotube (MnO2/CNT) nanocomposite has been successfully synthesized.
The as-produced nanocomposite was characterized by different characteristic tools, such as X-ray diffraction, SEM, and FTIR. The MnO2/CNT nanocomposite was utilized as a fixed bed in a column system for removal of lead(II) from water. The experimental conditions were investigated and optimized. The pH range between 3 and 7 was studied; the optimum removal was found when the pH was equal to 6 and 7. The thickness of MnO2/CNT nanocomposite compact layer was also changed to find the optimum parameter for higher removal.
It was observed that the slower the flow rates of the feed solution the higher the removal because of larger contact time.
KeywordsCarbon nanotubes MnO2/CNT nanocomposite Lead removal Column system
The authors acknowledge the support of King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia, for this work.
- Gupta VK, Imran A (2004) Removal of lead and chromium from wastewater using bagasse fly ash—a sugar industry waste. J Colloid Interface Sci 27:21–28Google Scholar
- Laumakis MT, Martin PJ, Pamucku S, Owens K (1995) Proceeding of the International Conference on Hazard Waste Management. ASCE, New York, pp 528–535Google Scholar
- Li J, Chen S, Sheng G, Hu J, Tan X, Wang X (2011) Effect of surfactants on Pb(II) adsorption from aqueous solutions using oxidized multiwall carbon nanotubes. Chem Eng J166:551–558Google Scholar
- Luo YY, Hong A (1997) Oxidation and dissolution of lead in chlorinated drinking water. Adv Environ Eng 1:84–97Google Scholar
- Reed BE, Arunachalam S, Thomas B (1994) Removal of lead and cadmium from aqueous streams using granular activated carbon columns. Environ Prog 13:60–64Google Scholar
- Singh PK, Premanjali R, Pandey P, Sinha S (2011) Modeling and optimization of trihalomethanes formation potential of surface water (a drinking water source) using Box–Behnken design. Environ Sci Pollut Res. doi: 10.1007/s11356-011-0544-y