Double Layers of Truncated Semi Rectangular Monopole Design with Trimmed Half Ground Plane
- 9 Downloads
In this research, a new extreme compact half rectangular monopole antenna with modified ground plane is proposed. The antenna is composed of a semi rectangular radiator with modified partial ground plane. The ground plane contains I shapes slots providing ultra-wide operating frequency from 2.6 till 14 GHz based on − 10 dB standard. In addition, the proposed monopole is characterized by its extensively reduced structure. The patch is printed on a substrate material of Rogers Duriod RT5880, which has relative permittivity of \(\epsilon r = 2.2,\) with a total size of 10 × 14 × 0.9 mm3. The antenna has been studied, and optimized with respect to impedance matching, bandwidth, size, radiation characteristics, and fabrication cost. Both simulation results and experimental measurement are shown with good agreement. The proposed design results show that the monopole is suitable for ultra-wide band systems.
KeywordsCompact Monopole Patch UWB
Acknowledgments to the deanship of scientific research at the University of Hail, KSA for supporting and funding this project (BA-1512).
- 2.Schantz, H. (2005). The art and science of ultra wideband antennas. Norwood, MA: Artech House.Google Scholar
- 3.Chen, W.-K. (1993). Linear networks and systems (book style) (pp. 123–135). Belmont, CA: Wadsworth.Google Scholar
- 14.Federal Communication Commission. (2002). First report and order, revision of part15 of the commission’s rules regarding ultra-wideband transmission system, FCC 02 48.Google Scholar
- 15.Breed, G. (2008). An introduction to defected ground structures in microstrip circuits. High Frequency Electronics, 7, 50–54.Google Scholar
- 18.Azim, R., Mobashsher, A. T., & Islam, M. T. (2013). Ultra-wideband slot antenna with notched band for world interoperability for microwave access. International Journal of Communication Science and Engineering, 7(7), 802–805.Google Scholar