Tribology Letters

, 24:51 | Cite as

Modeling and simulation of wear in a pin on disc tribometer

Article

A very efficient, incremental implementation of Archard’s wear model on the global scale for pin wear and disc wear in a pin-on-disc tribometer is presented. The results from the model are in good agreement with experimental results. The identified wear model is implemented in a finite element based tool (Wear-Processor) for 3D wear simulations and the results compare favorably with that from the global wear modeling scheme.

Keywords

contact mechanics stress analysis ceramics wear mechanisms simulation modeling 

References

  1. 1.
    Gabriel K.J., Behi F., Mahadevan R., Mehregany M. (1990) Sensors and Actuators A21–A23: 184Google Scholar
  2. 2.
    Bhushan B. (1998) Tribology Issues and Opportunities in MEMS. Kluwer Academic Publishers, Dordrecht, NetherlandsGoogle Scholar
  3. 3.
    Williams J.A. (2001) Wear 251:965CrossRefGoogle Scholar
  4. 4.
    Maboudian R., Ashurst W.R., Carraro C. (2002) Tribol. Lett. 12:95CrossRefGoogle Scholar
  5. 5.
    D.M. Tanner, N.F. Smith, L.W. Irwin, W.P. Eaton, K.S. Helgesen, J.J. Clement, W.M. Miller, J.A. Walraven, K.A. Peterson, P. Tangyunyong, M.T. Dugger and S.L. Miller, Sandia Report – SAND2000-0091 (Sandia National Laboratory, USA, 2000)Google Scholar
  6. 6.
    D. Löhe and J. H. Haußelt, (Vol. Eds.) in: Micro-Engineering of Metals and Ceramics, Part I and Part II, H. Baltes, O. Brand, G. K. Fedder, C. Nierold, J. G. Korvink and O. Tabata, eds. Advanced micro and nanosystems (Wiley-VCH Verlag GmbH, Weinheim, Germany, 2005). Google Scholar
  7. 7.
    Huber N., Aktaa J. (2003) Microsystem Technologies 9:465CrossRefGoogle Scholar
  8. 8.
    Archard J.F. (1953) J. Appl. Phys. 24:981CrossRefGoogle Scholar
  9. 9.
    Strömberg N. (1999) Comput. Methods Appl. Mech. Engrg. 177:441CrossRefGoogle Scholar
  10. 10.
    Agelet de Saracibar C., Chiumenti M. (1999) Comput. Methods Appl. Mech. Engg. 177:401CrossRefGoogle Scholar
  11. 11.
    Molinari J.F., Ortiz M., Radovitzky R., Repetto E.A. (2001) Engg. Comput. 18:592CrossRefGoogle Scholar
  12. 12.
    P. Podra, FE Wear Simulation of Sliding Contacts Ph. D. Thesis (Royal Institute of Technology (KTH), Stockholm, Sweden, 1997)Google Scholar
  13. 13.
    Podra P., Andersson P. (1999) Tribol. Int. 32:71CrossRefGoogle Scholar
  14. 14.
    Öquist M. (2001) Wear 249:6CrossRefGoogle Scholar
  15. 15.
    Ko D.-C., Kim D.-H., Kim B.-M. (2002) Wear 252:859CrossRefGoogle Scholar
  16. 16.
    McColl I.R. Ding J., Leen S.B. (2004) Wear 256:1114CrossRefGoogle Scholar
  17. 17.
    Ding J., Leen S.B., McColl I.R. (2004) Int. J. Fatigue 26: 521CrossRefGoogle Scholar
  18. 18.
    Gonzalez C., Martin A., Garrido M.A., Gomez M.T., Rico A., Rodriguez J. (2005) Wear 259:609CrossRefGoogle Scholar
  19. 19.
    Kónya L., Váradi K., Friedrich K. (2005) Mechanical Engineering 49:25Google Scholar
  20. 20.
    ABAQUS User Manual V 6.5 (Hibbit, Karlsson, & Sorensen, Inc., Providence, RI, USA, 2004)Google Scholar
  21. 21.
    Sui H., Pohl H., Schomburg U., Upper G., Heine S. (1999) Wear 224:175CrossRefGoogle Scholar
  22. 22.
    Hoffmann H., Hwang C., Ersoy K. (2005) Annals of the CIRP 54:217CrossRefGoogle Scholar
  23. 23.
    Hegadekatte V., Huber N., Kraft O. (2005) Modelling Simul. Mater. Sci. Eng. 13:57CrossRefGoogle Scholar
  24. 24.
    V. Hegadekatte, N. Huber and O. Kraft, Proc. 1st Vienna Intl. Conf. on Micro- and Nano-Technology (Vienna, Austria, March 9–11, (2005) 181)Google Scholar
  25. 25.
    V. Hegadekatte, N. Huber and O. Kraft, in: Micro-Engineering of Metals and Ceramics, Part I and Part II, D. Löhe and J.H. Haußelt, eds. (Wiley-VCH Verlag GmbH, Weinheim, Germany, 2005) 605Google Scholar
  26. 26.
    Kim N.H., Won D., Burris D., Holtkamp B., Gessel G.R., Swanson P., Sawyer W.G. (2005) Wear 258:1787CrossRefGoogle Scholar
  27. 27.
    Podra P., Andersson S. (1997) Wear 207:79CrossRefGoogle Scholar
  28. 28.
    Jiang J., Arnell R.D. (1998) Wear 217:190CrossRefGoogle Scholar
  29. 29.
    Dickrell D.J., Sawyer W.G. (2004) Tribol. Trans. 47:257CrossRefGoogle Scholar
  30. 30.
    Sawyer W.G. (2004) Tribol. Lett. 17:139CrossRefGoogle Scholar
  31. 31.
    Liu Z., Hua M., Reuben R.L. (1999) Tribol. Lett. 4:183CrossRefGoogle Scholar
  32. 32.
    Johnson K.L. (1985) Contact Mechanics. Cambridge University Press, Cambridge, UKGoogle Scholar
  33. 33.
    H. Hertz, J. Reine und Angewandte Mathematik 92 (1882) 156Google Scholar
  34. 34.
    Oliver W.C., Pharr G.M. (1992) J. Mat. Res. 7:1564Google Scholar
  35. 35.
    J. Herz, J. Schneider and K.-H. Zum Gahr, Proceedings of the GFT Tribologie-Fachtagung, 27 to 29 September, Göttingen, Germany, 2004Google Scholar
  36. 36.
    Sarkar A.D. (1980) Friction and Wear. Academic Press Inc. Ltd., London, UKGoogle Scholar
  37. 37.
    Khedkar J., Negulescu I., Meletis E.I. (2002) Wear 252:361CrossRefGoogle Scholar
  38. 38.
    Kauzlarich J.J., Williams J.A. (2001) Proc. Instn. Mech. Engrs. 215:387CrossRefGoogle Scholar
  39. 39.
    Tyulyukovskiy E., Huber N., Kraft O. (2005) Mat.-wiss. u. Werkstofftech. 36:157CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2006

Authors and Affiliations

  1. 1.Institut für Zuverlässigkeit von Bauteilen und SystemenUniversität Karlsruhe (TH)KarlsruheGermany
  2. 2.Institut für Materialforschung IIForschungszentrum Karlsruhe GmbHEggenstein-LeopoldshafenGermany

Personalised recommendations