Transport in Porous Media

, Volume 100, Issue 1, pp 69–82 | Cite as

Fracture Propagation Driven by Fluid Outflow from a Low-Permeability Aquifer

  • Gennady Yu. Gor
  • Howard A. Stone
  • Jean H. Prévost


Deep saline aquifers are promising geological reservoirs for \(\mathrm {CO}_2\) sequestration if they do not leak. The absence of leakage is provided by the caprock integrity. However, \(\mathrm {CO}_2\) injection operations may change the geomechanical stresses and cause fracturing of the caprock. We present a model for the propagation of a fracture in the caprock driven by the outflow of fluid from a low-permeability aquifer. We show that to describe the fracture propagation, it is necessary to solve the pressure diffusion problem in the aquifer. We solve the problem numerically for the two-dimensional domain and show that, after a relatively short time, the solution is close to that of one-dimensional problem, which can be solved analytically. We use the relations derived in the hydraulic fracture literature to relate the width of the fracture to its length and the flux into it, which allows us to obtain an analytical expression for the fracture length as a function of time. Using these results we predict the propagation of a hypothetical fracture at the In Salah \(\mathrm {CO}_2\) injection site to be as fast as a typical hydraulic fracture. We also show that the hydrostatic and geostatic effects cause the increase of the driving force for the fracture propagation and, therefore, our solution serves as an estimate from below. Numerical estimates show that if a fracture appears, it is likely that it will become a pathway for \(\mathrm {CO}_2\) leakage.


\(\mathrm {CO}_2\) sequestration Fracture propagation Porous media 



Funding for this research has been provided by the Carbon Mitigation Initiative ( sponsored by BP. We thank George Scherer for fruitful discussions and Allyson Sgro for useful comments on the manuscript. We also thank the anonymous reviewers for the constructive comments that led to significant improvements in the manuscript.


  1. Barenblatt, G.I.: The mathematical theory of equilibrium cracks in brittle fracture. Adv. Appl. Mech. 7, 55–129 (1962)Google Scholar
  2. Cappa, F., Rutqvist, J.: Modeling of coupled deformation and permeability evolution during fault reactivation induced by deep underground injection of \(\text{ CO }_2\). Int. J. Greenh. Gas Control 5(2), 336–346 (2011)CrossRefGoogle Scholar
  3. Carslaw, H.S., Jaeger, J.C.: Conduction of Heat in Solids, 2nd edn. Oxford Science Publications, Oxford (1986)Google Scholar
  4. Coussy, O.: Poromechanics, 2nd edn. Wiley, New York (2004)Google Scholar
  5. Detournay, E.: Propagation regimes of fluid-driven fractures in impermeable rocks. Int. J. Geomech. 4(1), 35–45 (2004)CrossRefGoogle Scholar
  6. Geertsma, J., de Klerk, F.: A rapid method of predicting width and extent of hydraulically induced fractures. J. Petroleum Technol. 21(12), 1571–1581 (1969)Google Scholar
  7. Goodarzi, S., Settari, A., Keith, D.: Geomechanical modeling for \(\text{ CO }_2\) storage in nisku aquifer in wabamun lake area in Canada. Int. J. Greenh. Gas Control 10, 113–122 (2012)CrossRefGoogle Scholar
  8. Gor, G.Y., Elliot, T.R., Prévost, J.H.: Effects of thermal stresses on caprock integrity during \(\text{ CO }_2\) storage. Int. J. Greenh. Gas Control 12, 300–309 (2013)CrossRefGoogle Scholar
  9. Humez, P., Audigane, P., Lions, J., Chiaberge, C., Bellenfant, G.: Modeling of \(\text{ CO }_2\) leakage up through an abandoned well from deep saline aquifer to shallow fresh groundwaters. Transp. Porous Media 90(1), 153–181 (2011)CrossRefGoogle Scholar
  10. Iding, M., Ringrose, P.: Evaluating the impact of fractures on the performance of the In Salah \(\text{ CO }_2\) storage site. Int. J. Greenh. Gas Control 4(2), 242–248 (2010)CrossRefGoogle Scholar
  11. Khristianovich, S.A., Zheltov, Y.P.: Formation of vertical fractures by means of highly viscous liquid. In: Proceedings of the Fourth World Petroleum Congress, Rome Section II 579–86 (1955)Google Scholar
  12. Luo, Z., Bryant, S.L.: Influence of thermo-elastic stress on \(\text{ CO }_2\) injection induced fractures during storage. In: SPE International Conference on \(\text{ CO }_2\) capture, storage, and utilization, 10–12 November 2010. New Orleans, Louisiana, USA 2010Google Scholar
  13. Luo, Z., Bryant, S.L.: Influence of thermoelastic stress on fracturing a horizontal injector during geological \(\text{ CO }_2\) storage. In: Canadian Unconventional Resources Conference, 15–17 November 2011. Alberta, Canada (2011)Google Scholar
  14. Michael, K., Allinson, G., Golab, A., Sharma, S., Shulakova, V.: \(\text{ CO }_2\) storage in saline aquifers II - experience from existing storage operations. Energy Procedia 1 (1), 1973–1980. In: Proceedings of the 9th International Conference on Greenhouse Gas Control Technologies (GHGT-9), 16–20 November 2008. USA, Washington DC (2009)Google Scholar
  15. Morris, J.P., Hao, Y., Foxall, W., McNab, W.: A study of injection-induced mechanical deformation at the In Salah \(\text{ CO }_2\) storage project. Int. J. Greenh. Gas Control 5(2), 270–280 (2011)CrossRefGoogle Scholar
  16. Nilson, R.H.: Similarity solutions for wedge-shaped hydraulic fractures driven into a permeable medium by a constant inlet pressure. Int. J. Numer. Analy. Methods Geomech. 12(5), 477–495 (1988)CrossRefGoogle Scholar
  17. Prévost, J.H.: DYNAFLOW: A Nonlinear Transient Finite Element Analysis Program. Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ. (1981). Last update 2013. Accessed June 2013
  18. Preisig, M., Prévost, J.H.: Coupled multi-phase thermo-poromechanical effects. case study: \(\text{ CO }_2\) injection at In Salah, Algeria. Int. J. Greenh. Gas Control 5(4), 1055–1064 (2011)CrossRefGoogle Scholar
  19. Rutqvist, J., Vasco, D.W., Myer, L.: Coupled reservoir-geomechanical analysis of \(\text{ CO }_2\) injection and ground deformations at In Salah, Algeria. Int. J. Greenh. Gas Control 4(2), 225–230 (2010)Google Scholar
  20. Smith, J., Durucan, S., Korre, A., Shi, J.-Q.: Carbon dioxide storage risk assessment: Analysis of caprock fracture network connectivity. Int. J. Greenh. Gas Control 5(2), 226–240 (2011)CrossRefGoogle Scholar
  21. Snow, D.T.: Anisotropic permeability of fractured media. Water Resour. Res. 5(6), 1273–1289 (1969)CrossRefGoogle Scholar
  22. Zhang, J., Scherer, G.W.: A novel method for measuring permeability of shale. Int. J. Rock Mechanics Min. Sci. 53, 179–191 (2012)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2013

Authors and Affiliations

  • Gennady Yu. Gor
    • 1
  • Howard A. Stone
    • 2
  • Jean H. Prévost
    • 1
  1. 1.Department of Civil and Environmental EngineeringPrinceton UniversityPrincetonUSA
  2. 2.Department of Mechanical and Aerospace EngineeringPrinceton UniversityPrincetonUSA

Personalised recommendations