Advertisement

Strength of Materials

, Volume 51, Issue 1, pp 1–10 | Cite as

Numerical Simulation of the Inlet/Outlet Pressure Ratio Effect on the Heat Transfer Coefficient in an Air Turbine Cascade

  • Z. He
  • J. H. Lin
  • X. Y. SunEmail author
  • X. Gu
SCIENTIFIC AND TECHNICAL SECTION
  • 14 Downloads

Based on the state-of-the art methods of gas turbine cascade heat transfer assessment, a theoretical model of the two-dimensional air turbine cascade is proposed, wherein gas flows past the turbine blade profile. The velocity, temperature, and pressure fields, as well as the heat transfer distribution along the pressure and suction surfaces, the leading and trailing edges of the turbine blade were computed via FLUENT software at different pressure ratios. This permitted of studying the heat transfer evolution at different pressure ratios in the same position and at the same pressure ratio in different positions.

Keywords

pressure ratio heat transfer turbine cascade 

Notes

Acknowledgments

This work was supported by the National Natural Science Foundation of China (No. 11602066) and the National Science Foundation of Heilongjiang Province of China (QC2015058 and 42400621-1-15047).

References

  1. 1.
    Aeroengine Components, Aerodynamics, and Thermodynamics, Aviation Industry Press (2016).Google Scholar
  2. 2.
    P. G. Hill and C. R. Peterson, Mechanics and Thermodynamics of Propulsion, Addison-Wesley (1965), pp. 5–32.Google Scholar
  3. 3.
    P. Kalghatgi and S. Acharya, “Improved film cooling effectiveness with a round film cooling hole embedded in a contoured crater,” J. Turbomach., 137, No. 10, 101006, Paper No: TURBO-14-1279 (2015), doi:  https://doi.org/10.1115/1.4030395.
  4. 4.
    R. S. Bunker, “Film cooling effectiveness due to discrete holes within a transverse surface slot,” in: ASME Turbo Expo 2002: Power for Land, Sea, and Air (June 3–6, 2002, Amsterdam, The Netherlands), Vol. 3, Paper No. GT2002-30178, pp. 129–138 (2002), doi:  https://doi.org/10.1115/GT2002-30178.
  5. 5.
    G. Li, C. Wu, W. Zhang, et al., “Effect of cross-flow direction of coolant on film cooling effectiveness with one inlet and double outlet hole injection,” Propuls. Power Res., 1, No. 1, 71–77 (2012).CrossRefGoogle Scholar
  6. 6.
    D. A. Nealy, M. S. Mihelc, L. D. Hylton, and H. J. Gladden, “Measurements of heat transfer distribution over the surfaces of highly loaded turbine nozzle guide vanes,” J. Eng. Gas Turbines Power, 106, No. 1, 149–158 (1984).CrossRefGoogle Scholar
  7. 7.
    J. Xu, J. Yao, J. Ja, et al., “Experimental investigation on the near-field character of film cooling with 30 deg injection from a row of holes on a convex surface,” J. Eng. Thermophys., 5, 182–186 (1984).Google Scholar
  8. 8.
    Y. Liu, J. Huang, B. Yang, et al., “Duality of the interfacial thermal conductance in graphene-based nanocomposites,” Carbon, 75, 169–177 (2014).CrossRefGoogle Scholar
  9. 9.
    F. Cao, Y. Liu, J. Xu, et al., “Probing nanoscale thermal transport in surfactant solutions,” Sci. Rep., 5, 16040 (2015), doi:  https://doi.org/10.1038/srep16040.CrossRefGoogle Scholar
  10. 10.
    F. R. Menter, “Two-equation eddy-viscosity turbulence models for engineering applications,” AIAA J., 32, No. 8, 1598–1605 (1994).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.College of Aerospace and Civil EngineeringHarbin Engineering UniversityHarbinChina

Personalised recommendations