The structural-phase state of a 30KhGSA steel cladded with a high-hardness heat-resistant R18-type steel alloyed with aluminum and nitrogen is studied by the x-ray diffraction method in the state after plasma cladding in a nitrogen atmosphere and high-temperature tempering. It has been established that the base phases in the cladded layer are α-Fe solid solution and carbonitrides based on iron, tungsten, chromium, molybdenum, and aluminum (Fe6W6NС and AlN). High-temperature processing (tempering) of the cladded layer leads to an increase in the crystal lattice parameter (from 2.866 to 2.890 Å) and sizes of coherent scattering region (from 25 to 100 nm) and a decrease in the internal elastic stresses (from 1000 to 600 MPa).
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Price includes VAT for USA
Subscribe to journal
Immediate online access to all issues from 2019. Subscription will auto renew annually.
This is the net price. Taxes to be calculated in checkout.
Yu. A. Geller, Tool Steels [in Russian], Metallurgiya, Moscow (1975).
B. E. Paton, ed., Technology of Electric Fusion Welding of Metals and Alloys [in Russian], Mashinostroenie, Moscow (1974).
O. A. Peregudov, K. V. Morozov, V. E. Gromov, et al., Physics of Strength and Plasticity of Materials [in Russian], Publishing House of Siberian State Industrial University, Novokuznetsk (2015).
N. N. Koval’ and V. E. Gromov, eds., Modern Trends in Modification of the Material Structure and Properties [in Russian], Publishing House of Scientific and Technology Literature, Tomsk (2015).
N. N. Malushin and D. V. Valuev, Provision of the Quality of Parts of Metallurgical Equipment at All Stages of Their Life Cycle by Plasma Cladding with Heat-Resistant Steels [in Russian], Publishing House of Tomsk Polytechnic University, Tomsk (2013).
N. I. Medvedev, L. E. Kar’kina, and A. L. Ivanovskii, Fiz. Met. Metalloved., 101, No. 5, 479–484 (2006).
V. A. Barinov and V. T. Surikov, Fiz. Met. Metalloved., 105, No. 3, 262–270 (2008).
A. Zh. Tuleushev, Yu. Zh. Tuleushev, and V. N. Volodin, Fiz. Met. Metalloved., 97, No. 4, 49–57 (2004).
V. N. Perevezentsev and A. S. Pupynin, Vestn. Udmurt. Univ. Ser. Fiz. Khim., No. 1, 200–212 (2008).
D. A. Romanov, S. V. Moskovskii, K. V. Sosnin, et al., Mater. Res. Express, 6, 055042 (2019).
N. N. Malushin, R. A. Gizatulin, A. P. Kovalev, et al., Zagot. Proizv. Mashinostr., No. 12, 30–40 (2017).
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 10, pp. 106–111, October, 2019
About this article
Cite this article
Malushin, N.N., Romanov, D.A., Kovalev, A.P. et al. Structural-phase State of a High-hardness Heatresistant Alloy Formed by Plasma Cladding in a Nitrogen Atmosphere and High-Temperature Tempering. Russ Phys J (2020). https://doi.org/10.1007/s11182-020-01917-8
- plasma cladding
- x-ray diffraction method
- thermal cycle of plasma cladding
- phase composition