Advertisement

Refractories and Industrial Ceramics

, Volume 60, Issue 2, pp 134–138 | Cite as

Optimized Processes for Flame Guncreting and Effective Guncrete Mortars for Hot Repairs to Non-Ferrous Metallurgy Equipment

  • A. V. GulyaevaEmail author
Article
  • 3 Downloads

We have studied flame guncreting and the guncrete mortars used in ferrous metallurgy, as well as the use of flame guncreting to make repairs to linings without shutting down equipment, thereby improving the lining resistance of equipment used in non-ferrous metallurgy. A special guncreting mortar targeted to the specific operating conditions for these equipment linings was developed. It was found that a low-melting-point component or thermite mixture used for self-propagating high-temperature synthesis (SHS) can be added to the guncrete mortar to reduce the temperature. A guncrete machine was designed to handle this guncrete mortar. Testing of the new guncrete machines and guncrete mortars at non-ferrous metallurgy facilities showed a factor of 1.8 – 2.5 increase in the wear resistance of the linings.

Keywords

Heat resistance hot patching flame guncreting periclasochromite quartzite self-propagating high-temperature synthesis (SHS) 

References

  1. 1.
    V. V. Slovikovskii and V. M. Gomoyunov, USSR Inventor’s Certificate 1694548, Guncrete Mortar, No. 4153462; application date 13 November 1986; published 01 September 1991, Byull. No. 30 (1991).Google Scholar
  2. 2.
    V. V. Slovikovskii, V. M. Gomoyunov, and Yu. I. Rozhin, “Flame guncreting for restoring and protecting the linings of copper-nickel production equipment,” Refractories 30, No. 11 – 12, 685 – 688 (1989) [Ogneupory, No. 11, 25 – 28 (1989).]CrossRefGoogle Scholar
  3. 3.
    E. A. Levashov, A. S. Rogachev, V. I. Yukhvid, and I. P. Borovinskaya, Physics, Chemistry, and Engineering Basics of Self-Propagating High-Temperature Synthesis, Binom, Moscow (1999).Google Scholar
  4. 4.
    V. S. Vladimirov, M. A. Ilyukhin, I. A. Karpukhin, et al., “Process approaches for improving the efficiency of high-temperature equipment in metallurgy,” Po Vsey Strane, No. 3, 5 – 8 (2003).Google Scholar
  5. 5.
    N. N. Chistopolova, V. K. Lyalin, M. S. Gladyshcheva, A. V. Igoshev, and V. V. Slovikovskii, Russian Federation Patent 2001035, Refractory mortar for fabrication of refractories, No. 4948394; application 24 June 1991, published 15 October 1993, Byull. No. 29 (1993).Google Scholar
  6. 6.
    V. V. Slovikovskii, “Effective guncrete mortars for flame guncreting non-ferrous metallurgical equipment,” Tsvetn. Met. (Moscow), No. 11, 44 – 46 (2005).Google Scholar
  7. 7.
    V. Slovikovskii and A. Gulyaeva, “Efficient use of SHS materials on high-temperature equipment in nonferrous metallurgy,” Refract. Ind. Ceram., 53(1), 1 – 3 (2012).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Ural Federal UniversityEkaterinburgRussia

Personalised recommendations