Advertisement

Refractories and Industrial Ceramics

, Volume 59, Issue 5, pp 552–554 | Cite as

Heat-Insulating Properties of High-Alumina Materials Filament-Reinforced with Glass Fiber of the Al2O3–SiO2 and Al2O3–SiO2–ZrO2 Systems

  • R. V. ZubashchenkoEmail author
Article

Refractory heat-insulating materials produced in Russia are characterized. The thermal stability of high-alumina heat-insulating materials filament-reinforced based on mullite-silica glass fiber is investigated. Thermal stability data of products with crystallized and non-crystallized matrixes is presented.

Keywords

mullite-silica glass fiber heat-insulating materials refractories thermal conductivity 

References

  1. 1.
    J. Allenstein, et al., Refractory Materials. Structure, Properties and Testing [translated into Russian from German], handbook, eds. G. Rouchka and Kh. Vutnau, Internet Inzhiniring, Moscow (2010) 392 p.Google Scholar
  2. 2.
    K. K. Strelov, Theoretical Basis of the Technology of Refractory Materials [in Russian], Metallurgiya, Moscow (1985) 480 p.Google Scholar
  3. 3.
    K. K. Strelov, I. D. Kascheev, and P. S. Mamykin, Technology of Refractories [in Russian], Metallurgiya, Moscow (1988) 528 p. 4. GOST 23619–79 “Refractory heat-insulating mullite-silica glass fiber-reinforced materials and products” [in Russian], technical requirement documentGoogle Scholar
  4. 4.
    GOST 5040–2015 “Refractory thermal insulation products” [in Russian], technical requirements document.Google Scholar
  5. 5.
    N. A. Vyatkina and O. V. Nadymova, “Development of the technology of lightweight refractory products of various apparent densities” [in Russian], in: Abstracts of the Int. Conf. of Refractory Workers and Metallurgists (Moscow, 15 – 16 April 2004), Novye Ogneupory, No. 4, 31 (2004).Google Scholar
  6. 6.
    Pat. RF 2643375, R. V. Zubashchenko and V. I. Kuzin, Heat-Insulating Refractory Product [in Russian], No. 2016152675, decl. 29 December 2016; publ. 01 February 2018.Google Scholar
  7. 7.
    W. D. Kingery, Introduction to Ceramics [in Russian], Stroyizdat, Moscow (1964) 534 p.Google Scholar
  8. 8.
    R. V. Zubashchenko, “Lining of a compact tunnel kiln with high-alumina products based on aluminosilicate fiber,” Novye Ogneupory, No. 2, p. 35 (2017).Google Scholar
  9. 9.
    R. V. Zubashchenko, “Experience of using refractory heat-insulating products based on aluminosilicate fiber in the lining of thermal units of the ceramic industry,” Steklo i Keramika, No. 6, 21 – 23 (2017).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.“PKF NK” JSCStary OskolRussia

Personalised recommendations