Advertisement

Refractories and Industrial Ceramics

, Volume 59, Issue 5, pp 496–501 | Cite as

Selection of Ceramic Tools in the Production Preparation Stage Taking Account of Operating Properties

  • V. V. KuzinEmail author
  • S. N. Grigor’ev
  • S. Yu. Fedorov
Article
  • 2 Downloads

As a result of life tests for different ceramic tools during turning alloy M-NP over a wide range cutting regimes their good operating properties are revealed in fields of using M05-M20. Established features are systematized and introduced into an information recovery system making it possible to select ceramic tools in the stage of production preparation taking account of operating properties.

Keywords

ceramic tools (CT) reliability wear criteria sudden ceramic tool failure cutting regime 

Notes

Work was carried out with financial support of the Russian Ministry of Education and Science within the scope of fulfilling state assignment in the sphere of scientific activity, project No. 9.1372.2017/4.6.

References

  1. 1.
    N. Gordeeva, “T-FLEX technology – from SAPR TP of a complex system for technological preparation of production,” SAPR Grafika, No. 3, 2 – 5 (2018).Google Scholar
  2. 2.
    GOST 14.004–83. Technological preparation of production. Terms and determination of main concepts. Intro. 07.01.193, Stadartinform (2006).Google Scholar
  3. 3.
    N. A. Bocharnikova, “Comprehensive automation of AO Uralkriomash by means of a PLM-system,” Avtomat. Prom., No. 9, 7 – 10 (2016).Google Scholar
  4. 4.
    A. P. Shulepov, A. V. Meshcherikov, and E. A. Bocharnikova, “Creation of an information recovery system for selecting an optimum cutting tool in the production of aero engine components,” Vestn. Samar. Gos. Aero. Univ., No. 5(47), Part 4, 51 – 54 (2014).Google Scholar
  5. 5.
    A. G. Bratukhina (editor) Russian Encyclopaedia CALS. Aerospace Engineering [in Russian], OAO NITs ASK, Moscow (2008).Google Scholar
  6. 6.
    J. Vigneau, P. Bordel, and R. Geslot, “Reliability of ceramic cutting tools,” CIRP Annals, 37, 101 – 104 (1988).CrossRefGoogle Scholar
  7. 7.
    V. V. Kuzin, “Effective use of high density ceramic for manufacture of cutting and working tools,” Refract. Indust. Ceram., 51(6), 421 – 426 (2010).CrossRefGoogle Scholar
  8. 8.
    Wenbin Ji, Yikun Yuan, Bin Zou, et al., “Friction and wear behavior of cemented carbide tool materials sliding against Al2O3 and Si3N4 ceramics under dry condition,” Ceram. Int., 44, 17486 – 17491 (2018).CrossRefGoogle Scholar
  9. 9.
    A. A. Vereschaka, A. D. Batako, A. A. Krapostin, et al., “Improvement in reliability of ceramic cutting tool using a damping system and nano-structured multi-layered composite coatings,” Procedia CIRP, 63, 563 – 568 (2017).CrossRefGoogle Scholar
  10. 10.
    V. V. Kuzin, S. I. Dos’ko, V. F. Popov, et al., “Tooling for high-speed cutting,” Russ. Eng. Res., 25(9), 20 – 25 (2005).Google Scholar
  11. 11.
    Xiaobin Cui, Feng Jiao, Pingmei Ming, et al., “Reliability analysis of ceramic cutting tools in continuous and interrupted hard turning,” Ceram. Int., 43, 10109 – 10122 (2017).CrossRefGoogle Scholar
  12. 12.
    A. Senthil Kumar, A. Raja Durai, and T. Sornakumar, “The effect of tool wear on tool life of alumina-based ceramic cutting tools while machining hardened martensitic stainless steel,” J. Mater. Process. Technol., 173, 151 – 156 (2006).CrossRefGoogle Scholar
  13. 13.
    V. V. Kuzin, “Increasing the operational stability of nitride-ceramic cutters by optimizing their grinding conditions,” Russ. Eng. Res., 23(12), 32 – 36 (2003).Google Scholar
  14. 14.
    Youqiang Xing, Jianxin Deng, Kedong Zhang, et al., “Effect of femtosecond laser pretreatment on wear resistance of Al2O3/TiC ceramic tools in dry cutting,” Int. J. Refract. Met. Hard Mater., 43, 291 – 301 (2014).CrossRefGoogle Scholar
  15. 15.
    Ali Çelik, Ismail Lazoglu, Alpagut Kara, et al., “Wear on SiAlON ceramic tools in drilling of aerospace grade CFRP composites, “ Wear, 338/339, 11 – 21 (2015).CrossRefGoogle Scholar
  16. 16.
    M. A. Volosova and V. V. Kuzin, “Regular features of wear of cutting plates from oxide and nitride ceramics,” Met. Sci. Heat Treat., 54(1/2), 41 – 46 (2012).CrossRefGoogle Scholar
  17. 17.
    Zengbin Yin, Chuanzhen Huang, Juntang Yuan, et al., “Cutting performance and life prediction of an Al2O3/TiC micro–nano-composite ceramic tool when machining austenitic stainless steel,” Ceram. Int., 4, Part B, 7059 – 7065 (2015).CrossRefGoogle Scholar
  18. 18.
    V. V. Kuzin, “Study of high-speed cutting with ceramic tools,” Russ. Eng. Res., No. 3, 40 – 46 (2004).Google Scholar
  19. 19.
    Fàbio F. Lima, Wisley F. Sales, and Eder S. Costa, “Wear of ceramic tools when machining Inconel 751 using argon and oxygen as lubri-cooling atmospheres,” Ceram. Int., 43, Part A, 677 – 685 (2017).CrossRefGoogle Scholar
  20. 20.
    Xiaobin Cui, Dong Wang, and Jingxia Guo, “Influences of tool rake angle and cutting speed on ceramic tool failure in continuous and intermittent turning of hardened steel,” Ceram. Int., 42, 12390 – 12400 (2016).CrossRefGoogle Scholar
  21. 21.
    V. V. Kuzin, S. N. Grigoriev, and M. Yu. Fedorov, “Role of the thermal factor in the wear mechanism of ceramic tools. Part 2. Microlevel,” J. Friction and Wear, 36(1), 40 – 44 (2015).CrossRefGoogle Scholar
  22. 22.
    Jun Zhao, Xunliang Yuan, and Yonghui Zhou, “Cutting performance and failure mechanisms of an Al2O3/WC/TiC micro-nano-composite ceramic tool,” Int. J. Refract. Met. Hard Mater., 28, 330 – 337 (2010).CrossRefGoogle Scholar
  23. 23.
    Li Xikun, Liu Jing, Qiu Like, et al., “Composition, characteristics and development of advanced ceramic cutting tools,” J. Rare Earths, 25, 287 – 294 (2007).CrossRefGoogle Scholar
  24. 24.
    V. V. Kuzin, S. N. Grigor’ev, M. Yu. Fedorov, and S. Yu. Fedorov, “Performance of channel cutters with ceramic plates in machining quenched steel,” Russ. Eng. Res., 33(1), 24 – 28 (2013).CrossRefGoogle Scholar
  25. 25.
    Bernd Bitterlich, Sebastian Bitsch, and Kilian Friederich, “SiAlON based ceramic cutting tools,” J. Eur. Ceram. Soc., 28, 989 – 994 (2008).CrossRefGoogle Scholar
  26. 26.
    Youqiang Xing, Jianxin Deng, Shipeng Li, et al., “Cutting performance and wear characteristics of Al2O3/TiC ceramic cutting tools with WS2/Zr soft-coatings and nano-textures in dry cutting,” Wear, 318, 12 – 26 (2014).CrossRefGoogle Scholar
  27. 27.
    V. V. Kuzin, S. N. Grigor’ev, and S. Yu. Fedorov, “Evaluation of the reliability of ceramic tools with a limited number of life tests based on established wear criteria,” Novye Ogneupory, No. 6, 66 – 70 (2018).Google Scholar
  28. 28.
    I. V. Kudryavtsev (editor), Engineering Materials, Choice and Application, Handbook in 5 Vol., Special Steels and Alloys, [in Russian], Mashinostroenie, Moscow (1968).Google Scholar
  29. 29.
    V. A. Pchelintsev, “Cutting molybdenum,” Vestn. Mashin., No. 5, 73 – 74 (1975).Google Scholar
  30. 30.
    V. V. Kuzin, “Highly productive cutting of molybdenum alloys,” Vestn. Mashin., No. 8, 39 – 44 (2004).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • V. V. Kuzin
    • 1
    Email author
  • S. N. Grigor’ev
    • 1
  • S. Yu. Fedorov
    • 1
  1. 1.FGBOU VO Moscow State Technological University StankinMoscowRussia

Personalised recommendations