Advertisement

Refractories and Industrial Ceramics

, Volume 54, Issue 5, pp 425–429 | Cite as

Modeling Detached Flows at the Inlet to Round Suction Flues With Annular Screens

  • O. A. Averkova
  • I. N. Logachev
  • K. I. Logachev
  • I. V. Khodakov
Ecology

The problem of detached flow at the inlet to a round suction flue, where an annular screen is situated within the range of action of the flue, is solved within the framework of the theory of jets of an ideal incompressible liquid. Through numerical realization of the newly constructed mathematical model, it becomes possible to construct streamlines and velocity fields and determine the compression of a jet of detached current as well as the optimal distance of the screen at which minimal thickness of the jet is observed and at which the resistance coefficient at the entrance of the suction medium into the flue is maximal. The results may be used to reduce harmful inflow of air into ventilation systems.

Keywords

detached streams ideal incompressible liquid method of discrete vortices coefficient of local resistance 

Notes

The present study was performed with the support of grants from the President of the Russian Federation NSh-588.2012.8, Russian Foundation for Basic Research No. 12-08-9750-p tsentr a, and plan of strategic development of the Shukhov State Technological University of Belgorod.

References

  1. 1.
    O. A. Averkova, V. Yu. Zorya, K. I. Logachev, et al., Numerical modeling of air streams at the inlet to slot leakages of ventilation shelters, Novye Ogneupory, No. 5, 31–36 (2010); Refractories and Industrial Ceramics, 51(3), 177 – 182 (2010).Google Scholar
  2. 2.
    O. A. Averkova, I. N. Logachev, and K. I. Logachev, Modeling separation of flow at the inlet to the slot leakages of ventilation shelters, Novye Ogneupory, No. 10, 56 – 60 (2012).Google Scholar
  3. 3.
    I. N. Logachev, K. I. Logachev, and O. A. Averkova, Methods and means of reducing the power consumption of ventilation systems in transfer of friable materials, Novye Ogneupory, No. 6, 66 – 70 (2013).Google Scholar
  4. 4.
    I. N. Logachev, K. I. Logachev, V. Yu. Zorya, et al., Modeling separated flows near a suction slot, Vychislitel. Metody i Programmirovanie, 11(1), 43 – 52 (2010).Google Scholar
  5. 5.
    I. N. Logachev, K. I. Logachev, and O. A. Averkova, Mathematical modeling of separated flows at the inlet to a screened planar channel, Vychislitel. Metody i Programmirovanie, 11(1), 68 – 77 (2010).Google Scholar
  6. 6.
    I. N. Logachev, K. I. Logachev, and O. A. Averkova, Mathematical modeling of jet air stream at the inlet to a planar channel with baffle plate and impermeable screen, Vychislitel. Metody i Programmirovanie, 11(2), 160 – 167 (2010).Google Scholar
  7. 7.
    O. A. Averkova, I. N. Logachev, and K. I. Logachev, Modeling potential currents with unknown boundaries on the basis of stationary discrete vortices, Vychislitel. Metody i Programmirovanie, 12(2), 213 – 219 (2011).Google Scholar
  8. 8.
    O. A. Averkova, I. N. Logachev, and K. I. Logachev, Modeling separation of flow at the inlet to suction flues in regions with slots, Vychislitel. Metody i Programmirovanie, 13(2), 298 – 306 (2012).Google Scholar
  9. 9.
    I. K. Lifanov, Method of Singular Integral Equations and Numerical Experiments [in Russian], Yanus, Moscow (1995), 560 pp.Google Scholar
  10. 10.
    I. E. Idel’chik, Hydraulic resistance at the entrance of a flow into a channel and passage through an opening, Promyshlennaya Aerodinamika: cb. BNT, NKAP, No. 2, 27 – 57 (1944).Google Scholar

Copyright information

© Springer Science+Business Media New York 2014

Authors and Affiliations

  • O. A. Averkova
    • 1
  • I. N. Logachev
    • 1
  • K. I. Logachev
    • 1
  • I. V. Khodakov
    • 1
  1. 1.FGBOU VPO Shukhov State Technological UniversityBelgorodRussia

Personalised recommendations