Refractories and Industrial Ceramics

, Volume 54, Issue 5, pp 388–391 | Cite as

Study of Effect of Zirconia-Graphite Material Composition on its Properties

  • A. V. Yagovtsev
  • N. V. Obabkov
  • I. D. Kashcheev

Contemporary oxide-graphite materials are analyzed. Density, ultimate strength in bending, and porosity of zirconia-graphite materials are studied using experimental planning. The effect of various components on properties of the materials obtained is evaluated.


zirconia-graphite material refractory for continuous steel casting density ultimate strength in bending porosity 


  1. 1.
    Yu. A. Polonskii and G. É. Solovushkova, “Use of quartz ceramic in ferrous metallurgy,” Chern. Met.: Byul, No. 15, 33 – 45 (1983).Google Scholar
  2. 2.
    A. A. Kortel’, L. M. Aksel’rod, V. K. Vasil’ev, et al., “Corundum-graphite submerged nozzles for a slab CBCM,” Ogneupory, No. 6, 37 – 40 (1990).Google Scholar
  3. 3.
    G. É. Solovushkova, M. A. Burova, I. F. Masover, et al., “State of work and prospects of developing refractories for basic ferrous metallurgy processes. Submerged nozzles of tundishes and pipes for metal stream protection,” Ogneupory, No. 5, 60 – 62 (1990).Google Scholar
  4. 4.
    Sugie Masuo, Yoshinobu Tanada, Yukifumi Sakai, et al., “Submerged nozzle for continuous casting of steel,” Taikabutsu Overseas, 1(2), 78 – 85 (1981).Google Scholar
  5. 5.
    G. Routschka, Taschenbuch Feuerfeste Werkstoffe: Aufbau, Eigenschaften, Prüfung, Vulkan-Verlag, Essen (2007).Google Scholar
  6. 6.
    L. M. Aksel’rod, G. I. Antonov, E. E. Grishenkov, et al., Refractories for Industrial Enterprises and Boilers. Refractory Services, (I. D. Kascheev and E. E. Grishenkov, editors) [in Russian], Intermet Inzhiniring, Moscow (2002).Google Scholar
  7. 7.
    I. G. Ochagova, “Development of alumina-graphite long nozzle for repeated use,” Novosti Chern. Met. za Rubezhom, No. 4, 79 – 82 (2007).Google Scholar
  8. 8.
    H. Li, B. Yang, J. Yang, and G. Liu, “Improvement on corrosion resistance of zirconia-graphite Material for powder line of SEN, China’s Refractories, 12(4), 3 – 6 (2003).Google Scholar
  9. 9.
    I. G. Ochagova, “Properties of refractory with high ZrO2 content for slag belt of submerged nozzles,” Novosti Chern. Met. za Rubezhom, No. 4, 83 – 86 (2007).Google Scholar
  10. 10.
    A. Sen, B. Prasad, Ya. K. Saku, et al., “Effect of nano-oxides and antioxidants on corrosion and erosion wear of submerged nozzles,” Ogneupory Tekhn. Keram., No. 4/5, 49 – 53 (2011).Google Scholar
  11. 11.
    A. Sen, B. Prasad, J.-K. Saku, et al., “Development of pipes for protecting metal stream of metal in a section of a steel pouring ladle – tundish for providing more prolonged pouring,” Novye Ogneupory, No. 9, 3 – 6 (2012)Google Scholar
  12. 12.
    Guo Qi Liu, Hong Xia Li, Fan Qian, et al, “Properties of ZrO2–C materials with anti-oxidants,” J. Advanced Materials Research, 156/157, 996 – 999.Google Scholar
  13. 13.
    Yu. P. Adler, E. V. Markova, and Yu. V. Granovskii, Experimental Planning for Finding Optimum Conditions [in Russian], Nauka, Moscow (1976).Google Scholar

Copyright information

© Springer Science+Business Media New York 2014

Authors and Affiliations

  • A. V. Yagovtsev
    • 1
  • N. V. Obabkov
    • 2
  • I. D. Kashcheev
    • 2
  1. 1.Pervoural’sk Dinas PlantPervoural’skRussia
  2. 2.GAOU VPOUral Federal UniversityEkaterinburgRussia

Personalised recommendations