Comparison of NO conversion over Cu/M (M = TiO2, Al2O3, ZSM-5, carbon nanotubes, activated carbon) catalysts assisted by plasma
- 135 Downloads
NO conversion using dielectric barrier discharge (DBD) plasma with different catalysts was investigated. Cu/TiO2, Cu/Al2O3, Cu/ZSM-5, Cu/CNTs and Cu/AC catalysts were prepared by incipient wetness impregnation with 4 wt% Cu loaded. BET, SEM, XRD, XPS, H2-TPR, NH3-TPD were used to measure and evaluate various catalysts. Compared with the plasma only process, the combination of plasma with different catalysts significant improved the NO conversion rate. The highest NO conversion rate of 76% could be achieved with Cu/ZSM-5 catalyst at the energy density of 184 J/L. The results indicate that Cu species over the support ZSM-5 can produce high concentrations of CuO, largest specific surface area, largest amounts of acidity and lowest reduction temperature (209 °C), these factors conducive to plasma-catalyst reaction. Besides, Cu/TiO2 and Cu/Al2O3 catalysts exhibited excellent NO conversion at the low energy density because of the low thermal stability. After plasma-catalyst reaction, the reducibility of CuO and Cu2O over supports decreased and the peak position of acid sites shifted to lower temperature.
KeywordsDielectric barrier discharge NO conversion Catalyst Plasma SCR
This work was supported by National Natural Science Foundation of China (51706069).