Advertisement

Powder Metallurgy and Metal Ceramics

, Volume 57, Issue 3–4, pp 229–234 | Cite as

Interaction of (Ti, Cr)B2-Based Composites with a Nickel Alloy

  • O. N. Grigoriev
  • V. P. KonovalEmail author
  • A. D. Panasyuk
  • V. F. Chorunov
Article
  • 23 Downloads

The paper examines how the Ni–Zr–Cr alloy wets (Ti, Cr)B2, AlN, (Ti, Cr)B2–AlN, and AlN–(TiB2–TiSi2) refractory materials. The wetting of (Ti, Cr)B2 leads to near-zero contact angles. The introduction of AlN additions deteriorates wetting of the refractory materials by the nickel alloy, and the Ni–Zr–Cr alloy does not wet pure aluminum nitride. There is insignificant diffusion of Zr to (Ti, Cr)B2 in contact of the alloy with the refractory materials. There is no interaction in the AlN–(Ni–Zr–Cr) system. The composite materials are promising for use in contact with high-temperature corrosive alloys.

Keywords

nickel alloys wetting contact interaction titanium–chromium diboride aluminum nitride 

References

  1. 1.
    G. V. Samsonov, L. Ya. Markovsky, A. F. Zhygach, and M. G. Valyashko, Boron and Its Compounds and Alloys [in Russian], Izd. AN USSR, Kyiv (1960), p. 590.Google Scholar
  2. 2.
    V. P. Konoval, V. Zh. Shemet, B. Grushko, et al., “Structure and properties of titanium–chromium diboride composites,” Powder Metall. Met. Ceram., 51, Nos. 7–8, 429–436 (2012).CrossRefGoogle Scholar
  3. 3.
    T. S. R. Ch. Murthy, J. K. Sonber, C. Subramanian, et al., “Densification, characterization and oxidation studies of (TiCr)B2 + 20% MoSi2,” Int. J. Refract. Met. Hard Mater., 37, 12–28 (2013).CrossRefGoogle Scholar
  4. 4.
    A. P. Umansky, V. P. Konoval, A. D. Panasyuk, and E. P. Dvornik, “Contact interaction of double titanium and chromium diboride with Fe–Cr alloys,” Powder Metall. Met. Ceram., 46, Nos. 1–2, 90–94 (2007).CrossRefGoogle Scholar
  5. 5.
    A. P. Umansky, E. P. Pugachevska, and V. P. Konoval, “Studying the contact interaction of titanium–chromium diboride with Ni–Cr alloys,” Adgez. Raspl. Paika Mater., No. 41, 44–52 (2008).Google Scholar
  6. 6.
    A. P. Umansky, A. D. Panasyuk, and V. P. Konoval, “Interaction of titanium–chromium diboride with Fe–Ni alloys,” Adgez. Raspl. Paika Mater., No. 39, 28–39 (2006).Google Scholar
  7. 7.
    V. D. Oreshkin, A. D. Panasyuk, and M. S. Borovikova, “Studying binary titanium and chromium diboride with ferroalloys,” in: Wear-Resistant Cladding Materials Based on Refractory Compounds: Collected Papers [in Russian], Naukova Dumka, Kyiv (1977), pp. 33–39.Google Scholar
  8. 8.
    M. S. Storozhenko, “Effect of molybdenum additions on the structurization of Fe–Mo alloys and contact interaction in the TiB2–(Fe–Mo) systems,” Powder Metall. Met. Ceram., 55, Nos. 9–10, 617–624 (2016).Google Scholar
  9. 9.
    A. E. Terentiev, V. P. Krasovsky, M. S. Storozhenko, et al., “Studying the wetting of zirconium, titanium and chromium borides and titanium carbide with a nickel-based self-fluxing alloy,” Adgez. Raspl. Paika Mater., No. 45, 79–86 (2012).Google Scholar
  10. 10.
    G. V. Samsonov, A. D. Panasyuk, and G. K. Kozina, “Effect of silicon, molybdenum, chromium, and tin additions on the adhesion in the (Ti, Cr)B2–cupronickel systems,” in: High-Temperature Borides and Silicides: Collected Papers [in Russian], Naukova Dumka, Kyiv (1978), pp. 123–126.Google Scholar
  11. 11.
    V. P. Konoval, “Studying the contact interaction of composites based on titanium–chromium diboride with NiAl alloy,” Adgez. Raspl. Paika Mater., No. 45, 55–60 (2012).Google Scholar
  12. 12.
    V. A. Lavrenko, V. P. Konoval, A. D. Panasyuk, and A. P. Umansky, “High-temperature oxidation of AlN–TiCrB2 composites. I. Kinetics and mechanism of air oxidation up to 1600°C,” Powder Metall. Met. Ceram., 54, No. 7–8, 482–489 (2015).CrossRefGoogle Scholar
  13. 13.
    A. D. Panasyuk, V. P. Konoval, V. A. Lavrenko, et al., “High-temperature oxidation of AlN–TiCrB2 composites in air. II. Structure and phase composition of oxide layers formed on AlN–TiCrB2 composites in air up to 1600°C,” Powder Metall. Met. Ceram., 54, No. 9–10, 599–606 (2016).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • O. N. Grigoriev
    • 1
  • V. P. Konoval
    • 1
    Email author
  • A. D. Panasyuk
    • 1
  • V. F. Chorunov
    • 2
  1. 1.Frantsevich Institute for Problems of Materials ScienceNational Academy of Sciences of UkraineKyivUkraine
  2. 2.Paton Electric Welding InstituteNational Academy of Sciences of UkraineKyivUkraine

Personalised recommendations