Advertisement

Professor Grigorii Samsonov: Genuine Materials Scientist

  • G. S. Upadhyaya
Article

In the framework of the scholarship exchange agreement between India and the USSR, I was sent in 1966 for postgraduate studies to the Kyiv Polytechnic Institute, Department of High-Temperature Materials and Powder Metallurgy, under the guidance of Professor Grigorii Samsonov. During my three-year postgraduate study, I completed my PhD thesis focusing on the alloys of refractory carbides. When I met Grigorii Samsonov, I found him a tough but, at the same time, very attentive supervisor. He encouraged his students to look for new ideas rather than use traditional approaches to the solution of emerging problems.

In the last year of my stay in Kyiv, Professor Samsonov suggested writing a monograph on refractory carbides since he knew about my work with the respective literature in Russian and English. I immediately agreed to his suggestion with the condition that he would be a coauthor, and we readily reached consensus. Later on, when I presented my first draft, Grigorii Samsonov proposed...

References

  1. 1.
    S. P. Jarvis, H. Yamada, S. I. Yamamoto, et al., “Direct mechanical measurement of interatomic potentials,” Nature, 384, No. 6606, 247–249 (1996).CrossRefGoogle Scholar
  2. 2.
    G. V. Samsonov and Ya. S. Umansky, Hard Compounds of Refractory Metals [in Russian], Metallurgizdat, Moscow (1957), p. 388.Google Scholar
  3. 3.
    G. V. Samsonov, I. F. Pryadko, and L. F. Pryadko, Configurational Model of Matter [in Russian], Naukova Dumka, Kyiv (1971), p. 270.Google Scholar
  4. 4.
    G. V. Samsonov, G. S. Upadhyaya, and V. S. Neshpor, Physical Materials Science of Carbides [in Russian], Naukova Dumka, Kyiv (1974), p. 455.Google Scholar
  5. 5.
    A. Cottrell, Chemical Bonding in Transition Metal Carbides, Institute of Materials, London (1995), p. 97.Google Scholar
  6. 6.
    G. S. Upadhyaya, “Stacking faults in crystals and model of stable electronic configurations,” Izv. Vuz. Fiz., No. 9, 38–45 (1969).Google Scholar
  7. 7.
    G. V. Samsonov, G. S. Upadhyaya, and G. K. Kozina, “Wetting of titanium and niobium carbides and their alloys with liquid copper,” Fiz. Khim. Mekh. Mater., 6, No. 4, 106–107 (1970).Google Scholar
  8. 8.
    G. S. Upadhyaya and G. V. Samsonov, “Some relationships of constitutional diagrams of III–VI transition metals,” J. Less Common Met., 17, 161–167 (1969).CrossRefGoogle Scholar
  9. 9.
    D. Uskokovic, G. V. Samsonov, and M. M. Ristic, Activated Sintering, University of Belgrade, Belgrade (1974).Google Scholar
  10. 10.
    A. L. Borisova and O. V. Evtushenko, “Diffusional processes in the welding of some refractory carbides to metals,” Powder Metall. Met. Ceram., 18, No. 7, 481–487 (1979).CrossRefGoogle Scholar
  11. 11.
    G. V. Samsonov and Yu. G. Tkachenko, “Effect of temperature and porosity on the external friction of carbides in vacuum,” Powder Metall. Met. Ceram., 8, No. 3, 211–213 (1969).CrossRefGoogle Scholar
  12. 12.
    A. M. Lemeshko, V. Ya. Naumenko, and G. S. Upadhyaya, “Electric erosion resistance of refractory carbides in the homogeneity range,” Electron. Obrab. Mater., No. 4, 6–9 (1970).Google Scholar
  13. 13.
    S. K. Bhaumik, G. S. Upadhyaya, and M. L. Vaidya, “Properties and microstructure of carbide and binder modified WC–10 Co cemented carbides,” Mater. Sci. Technol., 7, 723–727 (1991).CrossRefGoogle Scholar
  14. 14.
    S. K. Bhaumik, G. S. Upadhyaya, and M. L. Vaidya, “Microstructure and mechanical properties of WC–TiN–Co and WC–TiN–Mo2C–Co(Ni) cemented carbides,” Ceram. Int., 18, 327–336 (1992).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • G. S. Upadhyaya
    • 1
  1. 1.VaranasiIndia

Personalised recommendations