Improving Uv Radiation Absorption by Copper Oxide NPs/PMMA Nanocomposites for Electrical Switching Applications
Nanocomposites based on the radiation absorbing polymer (PNCs) are of interest for a variety of applications including circuit breakers, UV-shielding windows, contact lenses, and glasses among others. Such PNCs can be made by incorporating suitable radiation absorbing nanoparticles into a polymeric matrix by in situ polymerization. In this study, spherical nanoparticles (5–6 nm) of oleic acid (OA) surface modified cupric oxide (CuO) are synthesized and used to improve the ultra-violet (UV) radiation absorption property of a polymer matrix, i.e., polymethylmethacrylate (PMMA). The synthesis of spherical CuO nanoparticles, surface modification using OA, dispersion of CuO nanoparticles with different concentrations in PMMA, and UV radiation absorption property of the resultant PNC are investigated. Two different PNCs are produced using OA modified CuO nanoparticles with different concentrations. As synthesized CuO nanoparticles and OA modified CuO nanoparticles are examined by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR) techniques. The UV absorption edges are evaluated from the UV-Vis absorption spectra by using UV-Visible absorption spectroscopy. The results show that the UV radiation absorption of the PNC with higher concentration of CuO nanoparticles is improved compared with PMMA and the absorption edge moved towards longer wavelengths i.e., from 271 to 281 nm. These PNCs are successful in arc interruption process by absorbing a broad range of radiation emitted from high-energy copper arcs produced in the circuit breakers.
Keywords
polymer-based nanocomposites cupric oxide UV-absorption nanoparticles circuit breakerNotes
Acknowledgements
The authors are thankful to Prof. Rajeev Thottappillil, Head of the Department of the electromagnetic engineering at KTH for the financial support during these studies.
The authors would like to thank Mr. Mohsen Y. Tafti for assistance with XRD.
References
- 1.E. Jonsson et al., “Comparative study of arc-quenching capabilities of different ablation materials,” IEEE Trans. Power Deli, 28, 2065–2070 (2013).CrossRefGoogle Scholar
- 2.P. Hettwer, “Arc-interruption and gas-evolution characteristics of common polymeric materials,” IEEE Trans. Power App. Sys., 101, 689–1696 (1982).Google Scholar
- 3.C. Ruchti and L. Niemeyer, “Ablation controlled arcs,” IEEE Trans. Plasma Sci., 4, 423–434 (1986).CrossRefGoogle Scholar
- 4.Q. Ma et al., “Simulation study of the influence of wall ablation on arc behavior in a low-voltage circuit breaker,” IEEE Trans. Plasma Sci., 37, 261–269 (2009).CrossRefGoogle Scholar
- 5.E. Jonsson et al., “Arc quenching performance due to ablation; comparison between four common polymers,” in: 26th Int. Conf. Electr. Contacts, 26, 4–44 2012.Google Scholar
- 6.E. Doméjean et al., “Arc–wall interaction modelling in a low-voltage circuit breaker,” J. Phys. D: Appl. Phys., 30, 2132–2142 (1997).CrossRefGoogle Scholar
- 7.S. Li et al., “Nanocomposites of polymer and inorganic nanoparticles for optical and magnetic applications,” Nano Rev., 1, 1–19 2010.CrossRefGoogle Scholar
- 8.J. Jeng, J. Liu, and J. Jean, “Dispersion of oleate-modified CuO nanoparticles in a nonpolar solvent,” J. Am. Ceram. Soc., 90, No. 11, 3676–3679 (2007).CrossRefGoogle Scholar
- 9.M. Sahooli, S. Sabbaghi, R. Saboori, “Synthesis and characterization of monosized CuO nanoparticles,” Mater. Letters, 81, 169–172 (2012).CrossRefGoogle Scholar
- 10.A. Rahman et al., “Synthesis of copper oxide nanoparticles by using phormidium cyanobacterium,” Indo. J. Chem., 9, 355–360 (2009).Google Scholar