Advertisement

Nonlinear Dynamics

, Volume 93, Issue 4, pp 2487–2515 | Cite as

Nonlinear dynamic analysis of parabolic leaf springs using ANCF geometry and data acquisition

  • Tengfei Wang
  • Brian Tinsley
  • Mohil D. Patel
  • Ahmed A. Shabana
Original Paper
  • 150 Downloads

Abstract

The parabolic leaf spring is widely used in modern vehicle suspension systems because it has many desirable features, such as weak interleaf friction and light weight. In this paper, the parabolic leaf spring is analyzed using automatic geometric data acquisition and the finite element (FE) absolute nodal coordinate formulation (ANCF). In order to account for manufacturing considerations in developing the virtual models, the relaxed uniform cubic B-spline is used to represent the leaf spring profile curves and geometry. Three-dimensional scanning techniques based on structured light and multiple images are explored in this study to automatically extract the leaf spring complex geometric data. A new procedure is proposed to develop the ANCF/FE mesh from the physical object. Both double-leaf uniform-thickness and double-leaf parabolic spring models are developed and analyzed using different ANCF elements. Using ANCF geometry, piecewise linearly tapered parabolic leaf spring models are constructed, accounting for the leaf pre-stress. The interleaf contact is enforced using a penalty approach and a smoothed Coulomb friction model. It is shown that the fully parameterized low-order beam and plate elements suffer from locking problems, while the thin plate element can lead to less accurate results. The use of the new strain split method (SSM) as a locking alleviation technique is also examined in this investigation. It is shown that while the current SSM implementation can be effective in solving the locking problem in the case of symmetric bending-dominant loading, it may not produce accurate results in the case of torsional loading. The comparative study performed demonstrates that the higher-order ANCF beam element is more suitable for developing the leaf spring models compared to other ANCF elements considered in this investigation. The numerical results obtained show that the friction effect in parabolic leaf springs is much weaker than that in the leaf spring with uniform-thickness.

Keywords

Parabolic leaf spring Relaxed uniform cubic B-spline Three-dimensional scanning Absolute nodal coordinate formulation Vehicle dynamics Strain split method 

Notes

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

References

  1. 1.
    Nunney, M.J.: Light and Heavy Vehicle Technology, 4th edn. Butterworth-Heinemann, Oxford (2007)Google Scholar
  2. 2.
    Suveg, I., Vosselman, G.: Reconstruction of 3D building models from aerial images and maps. ISPRS J. Photogramm. Remote Sens. 58, 202–224 (2004)CrossRefGoogle Scholar
  3. 3.
    Li, Q., Yao, M., Yao, X., Xu, B.: A real-time 3D scanning system for pavement distortion inspection. Meas. Sci. Technol. 21, 015702-1-8 (2009)Google Scholar
  4. 4.
    Yao, A.W.L.: Applications of 3D scanning and reverse engineering techniques for quality control of quick response products. Int. J. Adv. Manuf. Technol. 26, 1284–1288 (2005)CrossRefGoogle Scholar
  5. 5.
    Varady, T., Martin, R.R., Cox, J.: Reverse engineering of geometric models—an introduction. Comput. Aided Des. 29, 255–268 (1997)CrossRefGoogle Scholar
  6. 6.
    Fancher, P.S., Ervin, R.D., MacAdam, C.C., Winkler, C.B.: Measurement and representation of the mechanical properties of truck leaf springs (No. 800905). SAE Technical Paper (1980)Google Scholar
  7. 7.
    Yum, Y.J.: Frictional behavior of automotive leaf spring. In: Science and Technology, 2000. KORUS 2000. Proceedings. The 4th Korea-Russia International Symposium, vol. 3, pp. 5–10 (2000)Google Scholar
  8. 8.
    Timoshenko, S.: Strength of Materials: Elementary Theory and Problems, 3rd edn. Van Nostrand-Reinhold, Princeton (1958)zbMATHGoogle Scholar
  9. 9.
    Society of Automotive Engineers: Spring Design Manual, Warrendale, PA, SAE Paper No. J1123 (1990)Google Scholar
  10. 10.
    Guo, K.: Development of leaf spring kinematical model and its applications in improvement of truck braking and steering analysis (No. 912566). SAE Technical Paper (1991)Google Scholar
  11. 11.
    Zahavi, E.: Analysis of a contact problem in leaf springs. Mech. Res. Commun. 19, 21–27 (1992)CrossRefzbMATHGoogle Scholar
  12. 12.
    Shokrieh, M.M., Rezaei, D.: Analysis and optimization of a composite leaf spring. Compos. Struct. 60, 317–325 (2003)CrossRefGoogle Scholar
  13. 13.
    Duan, L., Song, C., Yang, S., Fan, S., Lu, B.: High-precision modeling and simulation of the taper leaf spring of tandem suspension of commercial vehicles. J. Mech. Sci. Technol. 30, 3061–3067 (2016)CrossRefGoogle Scholar
  14. 14.
    Yadav, N., Dewangan, R., Patnaik, M.: Minimization of stress in a parabolic leaf spring by local algorithm for constant & priorities. Int. J. Eng. Res. Appl. 2, 1897–1899 (2012)Google Scholar
  15. 15.
    Patnaik, M., Yadav, N., Dewangan, R.: Study of a parabolic leaf spring by finite element method & design of experiments. Int. J. Mod. Eng. Res. 2, 1920–1922 (2012)Google Scholar
  16. 16.
    Kumar, K., Aggarwal, M.: Finite element analysis and optimization of a mono parabolic leaf spring using CAE software. Eng. Solid Mech. 3, 85–92 (2015)CrossRefGoogle Scholar
  17. 17.
    Kumar, K., Aggarwal, M.L.: Computer-aided FEA simulation of EN45A parabolic leaf spring. Int. J. Ind. Eng. Comput. 4, 297–304 (2013)Google Scholar
  18. 18.
    Omar, M.A., Shabana, A.A., Mikkola, A., Loh, W.Y., Basch, R.: Multibody system modeling of leaf springs. J. Vib. Control 10, 1601–1638 (2004)CrossRefzbMATHGoogle Scholar
  19. 19.
    Sugiyama, H., Shabana, A.A., Omar, M.A., Loh, W.Y.: Development of nonlinear elastic leaf spring model for multibody vehicle systems. Comput. Methods Appl. Mech. Eng. 195, 6925–6941 (2006)CrossRefzbMATHGoogle Scholar
  20. 20.
    Shabana, A.A.: Dynamics of Multibody Systems, 4th edn. Cambridge University Press, Cambridge (2013)CrossRefzbMATHGoogle Scholar
  21. 21.
    Yu, Z., Liu, Y., Tinsley, B., Shabana, A.A.: Integration of geometry and analysis for vehicle system applications: continuum-based leaf spring and tire assembly. J. Comput. Nonlinear Dyn. 11, 031011-1-11 (2016)Google Scholar
  22. 22.
    Patel, M., Shabana, A.A.: Locking alleviation in fully-parameterized ANCF beam elements: the strain split method. Technical Report # MBS2017-2-UIC, University of Illinois at Chicago (2017)Google Scholar
  23. 23.
    Yakoub, R.Y., Shabana, A.A.: Three dimensional absolute nodal coordinate formulation for beam elements: implementation and applications. Trans. Am. Soc. Mech. Eng. J. Mech. Des. 123, 614–621 (2001)Google Scholar
  24. 24.
    Shen, Z., Li, P., Liu, C., Hu, G.: A finite element beam model including cross-section distortion in the absolute nodal coordinate formulation. Nonlinear Dyn. 77, 1019–1033 (2014)CrossRefGoogle Scholar
  25. 25.
    Orzechowski, G., Shabana, A.A.: Analysis of warping deformation modes using higher order ANCF beam element. J. Sound Vib. 363, 428–445 (2016)CrossRefGoogle Scholar
  26. 26.
    Mikkola, A.M., Shabana, A.A.: A non-incremental finite element procedure for the analysis of large deformation of plates and shells in mechanical system applications. Multibody Syst. Dyn. 9, 283–309 (2003)MathSciNetCrossRefzbMATHGoogle Scholar
  27. 27.
    Dufva, K., Shabana, A.A.: Analysis of thin plate structures using the absolute nodal coordinate formulation. Proc. Inst. Mech. Eng. Part K J. Multi-body Dyn. 219, 345–355 (2005)Google Scholar
  28. 28.
    Fu, Y., Wan, Y., Wan, M., Wang, W.: Three-dimensional profile measurement of the blade based on surface structured light. Opt. Int. J. Light Electron Opt. 124, 3225–3229 (2013)CrossRefGoogle Scholar
  29. 29.
    Rusu, R.: Semantic 3D object maps for everyday manipulation in human living environments. Ph.D. Dissertation, Institut für Informatik, Technische Universität München, Germany (2009)Google Scholar
  30. 30.
    Barone, S., Paoli, A., Razionale, A.V.: Three-dimensional point cloud alignment detecting fiducial markers by structured light stereo imaging. Mach. Vis. Appl. 23, 217–229 (2012)CrossRefGoogle Scholar
  31. 31.
    Park, S., Baek, J., Moon, J.: Hand-held 3D scanning based on coarse and fine registration of multiple range images. Mach. Vis. Appl. 22, 563–579 (2011)CrossRefGoogle Scholar
  32. 32.
    Quan, L.: Image-Based Modeling. Springer, New York (2010)CrossRefzbMATHGoogle Scholar
  33. 33.
    Salomon, D.: Computer Graphics and Geometric Modeling. Springer, London (2012)zbMATHGoogle Scholar
  34. 34.
    Sopanen, J.T., Mikkola, A.M.: Description of elastic forces in absolute nodal coordinate formulation. Nonlinear Dyn. 34, 53–74 (2003)CrossRefzbMATHGoogle Scholar
  35. 35.
    Shabana, A.A.: Computational Continuum Mechanics, 3rd edn. Wiley, Chichester (2018)CrossRefzbMATHGoogle Scholar
  36. 36.
    Shabana, A.A.: ANCF reference node for multibody system analysis. Proc. Inst. Mech. Eng. Part K J. Multi-body Dyn. 229, 109–112 (2015)Google Scholar
  37. 37.
    Wang, Q., Tian, Q., Hu, H.: Dynamic simulation of frictional contacts of thin beams during large overall motions via absolute nodal coordinate formulation. Nonlinear Dyn. 77, 1411–1425 (2014)MathSciNetCrossRefGoogle Scholar
  38. 38.
    Patel, M., Orzechowski, G., Tian, Q., Shabana, A.A.: A new multibody system approach for tire modeling using ANCF finite elements. Proc. Inst. Mech. Eng. Part K J. Multi-body Dyn. 230, 69–84 (2016)Google Scholar
  39. 39.
    Nachbagauer, K., Gruber, P., Gerstmayr, J.: A 3D shear deformable finite element based on the absolute nodal coordinate formulation. In: Multibody Dynamics, pp. 77–96. Springer, Dordrecht (2013)Google Scholar
  40. 40.
    Gerstmayr, J., Shabana, A.A.: Analysis of thin beams and cables using the absolute nodal co-ordinate formulation. Nonlinear Dyn. 45, 109–130 (2006)CrossRefzbMATHGoogle Scholar
  41. 41.
    Matikainen, M.K., Valkeapää, A.I., Mikkola, A.M., Schwab, A.L.: A study of moderately thick quadrilateral plate elements based on the absolute nodal coordinate formulation. Multibody Syst. Dyn. 31, 309–338 (2014)MathSciNetCrossRefGoogle Scholar
  42. 42.
    New York City Department of Transportation, Street Design Manual (2015). http://www.nyc.gov/html/dot/downloads/pdf/nycdot-streetdesignmanual-interior-lores.pdf. Accessed 28 July 2017
  43. 43.
  44. 44.
    Mastinu, G., Manfred, P.: Road and Off-Road Vehicle System Dynamics Handbook. CRC Press, Boca Raton (2014)Google Scholar
  45. 45.
    Kat, C.J.: Validated leaf spring suspension models. Dissertation, University of Pretoria (2012)Google Scholar
  46. 46.
    Skrinjar, L., Slavič, J., Boltežar, M.: Absolute nodalcoordinate formulation in a pre-stressed large-displacementsdynamical system. Stroj. Vestn. J Mech. Eng. 63, 417–425 (2017)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media B.V., part of Springer Nature 2018

Authors and Affiliations

  • Tengfei Wang
    • 1
  • Brian Tinsley
    • 2
  • Mohil D. Patel
    • 2
  • Ahmed A. Shabana
    • 2
  1. 1.School of Mechatronics and EngineeringHarbin Institute of TechnologyHarbinChina
  2. 2.Department of Mechanical and Industrial EngineeringUniversity of Illinois at ChicagoChicagoUSA

Personalised recommendations