Nonlinear Dynamics

, Volume 72, Issue 1–2, pp 455–475 | Cite as

On application of Newton’s law to mechanical systems with motion constraints

Original Paper
First Online:
Received:
Accepted:

Abstract

This work is devoted to deriving and investigating conditions for the correct application of Newton’s law to mechanical systems subjected to motion constraints. It utilizes some fundamental concepts of differential geometry and treats both holonomic and nonholonomic constraints. This approach is convenient since it permits one to view the motion of any dynamical system as a path of a point on a manifold. In particular, the main focus is on the establishment of appropriate conditions, so that the form of Newton’s law of motion remains invariant when imposing an additional set of motion constraints on a mechanical system. Based on this requirement, two conditions are derived, specifying the metric and the form of the connection on the new manifold, which results after enforcing the additional constraints. The latter is weaker than a similar condition obtained by imposing a metric compatibility condition holding on Riemannian manifolds and employed frequently in the literature. This is shown to have several practical implications. First, it provides a valuable freedom for selecting the connection on the manifold describing large rigid body rotation, so that the group properties of this manifold are preserved. Moreover, it is used to state clearly the conditions for expressing Newton’s law on the tangent space and not on the dual space of a manifold, which is the natural geometrical space for this. Finally, the Euler–Lagrange operator is examined and issues related to equations of motion for anholonomic and vakonomic systems are investigated and clarified further.

Keywords

Holonomic and nonholonomic constraints Dynamics and differential geometry Tangent and dual spaces Metric compatibility condition Multibody dynamics 
This is a preview of subscription content, log in to check access.

References

  1. 1.
    Arnold, V.I.: Mathematical Methods of Classical Mechanics, 2nd edn. Springer, Berlin (1989) CrossRefGoogle Scholar
  2. 2.
    Bauchau, O.A.: Flexible Multibody Dynamics. Springer, London (2011) MATHCrossRefGoogle Scholar
  3. 3.
    Bayo, E., Ledesma, R.: Augmented Lagrangian and mass-orthogonal projection methods for constrained multibody dynamics. Nonlinear Dyn. 9, 113–130 (1996) MathSciNetCrossRefGoogle Scholar
  4. 4.
    Bertram, W.: Differential geometry, Lie groups and symmetric spaces over general base fields and rings. Mem. Am. Math. Soc. 192, 1–202 (2008) MathSciNetGoogle Scholar
  5. 5.
    Bloch, A.M.: Nonholonomic Mechanics and Control. Springer, New York (2003) MATHCrossRefGoogle Scholar
  6. 6.
    Bowen, R.M., Wang, C.-C.: Introduction to Vectors and Tensors, 2nd edn. Dover, New York (2008) MATHGoogle Scholar
  7. 7.
    Brüls, O., Cardona, A., Arnold, M.: Lie group generalized-α time integration of constrained flexible multibody systems. Mech. Mach. Theory 48, 121–137 (2012) CrossRefGoogle Scholar
  8. 8.
    Crouch, P., Grossman, R.: Numerical integration of ordinary differential equations on manifolds. J. Nonlinear Sci. 3, 1–33 (1993) MathSciNetMATHCrossRefGoogle Scholar
  9. 9.
    Essen, H.: On the geometry of nonholonomic dynamics. J. Appl. Mech. 61, 689–694 (1994) MathSciNetMATHCrossRefGoogle Scholar
  10. 10.
    Frankel, T.: The Geometry of Physics: An Introduction. Cambridge University Press, New York (1997) MATHGoogle Scholar
  11. 11.
    Geradin, M., Cardona, A.: Flexible Multibody Dynamics. Wiley, New York (2001) Google Scholar
  12. 12.
    Goudas, I., Stavrakis, I., Natsiavas, S.: Dynamics of slider-crank mechanisms with flexible supports and non-ideal forcing. Nonlinear Dyn. 35, 205–227 (2004) MATHCrossRefGoogle Scholar
  13. 13.
    Guo, Y.-X., Wang, Y., Chee, G.Y., Mei, F.-X.: Nonholonomic versus vakonomic dynamics on a Riemann–Cartan manifold. J. Math. Phys. 46, 0692902 (2005) MathSciNetGoogle Scholar
  14. 14.
    Greenwood, D.T.: Principles of Dynamics. Prentice-Hall, Englewood Cliffs (1988) Google Scholar
  15. 15.
    Kane, T.R., Levinson, D.A.: Dynamics: Theory and Applications. McGraw-Hill, New York (1985) Google Scholar
  16. 16.
    Kurdila, A.J., Junkins, J.L., Hsu, S.: Lyapunov stable penalty methods for imposing holonomic constraints in multibody system dynamics. Nonlinear Dyn. 4, 51–82 (1993) Google Scholar
  17. 17.
    Lanczos, C.: The Variational Principles of Mechanics. University of Toronto Press, Toronto (1952) Google Scholar
  18. 18.
    Marsden, J.E., Ratiu, T.S.: Introduction to Mechanics and Symmetry, 2nd edn. Springer, New York (1999) MATHCrossRefGoogle Scholar
  19. 19.
    Muller, A.: Motion equations in redundant coordinates with application to inverse dynamics of constrained mechanical systems. Nonlinear Dyn. 67, 2527–2541 (2012) CrossRefGoogle Scholar
  20. 20.
    Munthe-Kaas, H.: Runge–Kutta methods on Lie groups. BIT Numer. Math. 38, 92–111 (1998) MathSciNetMATHCrossRefGoogle Scholar
  21. 21.
    Murray, R.M., Li, Z., Sastry, S.S.: A Mathematical Introduction to Robot Manipulation. CRC Press, Boca Raton (1994) Google Scholar
  22. 22.
    Negrut, D., Haug, E.J., German, H.C.: An implicit Runge–Kutta method for the integration of differential–algebraic equations of multibody dynamics. Multibody Syst. Dyn. 9, 121–142 (2003) MathSciNetMATHCrossRefGoogle Scholar
  23. 23.
    Nayfeh, A.H., Balachandran, B.: Applied Nonlinear Dynamics. Wiley-Interscience, New York (1995) MATHCrossRefGoogle Scholar
  24. 24.
    Nikravesh, P.E.: Computer-Aided Analysis of Mechanical Systems. Prentice-Hall, Englewood Cliffs (1988) Google Scholar
  25. 25.
    Papastavridis, J.G.: Tensor Calculus and Analytical Dynamics. CRC Press, Boca Raton (1999) Google Scholar
  26. 26.
    Paraskevopoulos, E., Natsiavas, S.: A new look into the kinematics and dynamics of finite rigid body rotations using Lie group theory. Int. J. Solids Struct. 50, 57–72 (2013) CrossRefGoogle Scholar
  27. 27.
    Sattinger, D.H., Weaver, O.L.: Lie Groups and Algebras with Applications to Physics, Geometry and Mechanics. Springer, New York (1986) MATHCrossRefGoogle Scholar
  28. 28.
    Shabana, A.A.: Dynamics of Multibody Systems, 3rd edn. Cambridge University Press, New York (2005) MATHCrossRefGoogle Scholar
  29. 29.
    Shabanov, S.V.: Constrained systems and analytical mechanics in spaces with torsion. J. Phys. A, Math. Gen. 31, 5177–5190 (1998) MathSciNetMATHCrossRefGoogle Scholar
  30. 30.
    Udwadia, F.E., Kalaba, R.E., Phohomsiri, P.: Mechanical systems with nonideal constraints: explicit equations without the use of generalized inverses. J. Appl. Mech. 71, 615–621 (2004) MathSciNetMATHCrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2013

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringAristotle UniversityThessalonikiGreece

Personalised recommendations