Advertisement

Metal Science and Heat Treatment

, Volume 60, Issue 9–10, pp 589–593 | Cite as

Formation of Structure and Properties of Titanium Under Laser Surface Alloying with Nickel and Manganese

  • V. S. MuratovEmail author
  • E. A. Morozova
Article
  • 19 Downloads

The effect of laser surface alloying with nickel and manganese on the structure, phase composition, microhardness, and fretting resistance of the surface of titanium is studied. Treatment modes improving the structure and properties of the surface layers of titanium are determined.

Key words

titanium surface laser alloying nickel manganese 

References

  1. 1.
    N. A. Nochovnaya, P. V. Panin, E. B. Alekseev, and K. A. Bokov, “Recent sparingly alloyed titanium alloys; application and perspectives,” Metalloved. Term. Obrab. Met., No. 9, 8 – 15 (2016).Google Scholar
  2. 2.
    I. Chelnok and M. Karakan, “Effect of Ni – B chemical coating on the structure and tribological properties of pure titanium after plasma nitriding,” Metalloved. Term. Obrab. Met., No. 8, 28 – 32 (2016).Google Scholar
  3. 3.
    Yu. A. Sokolov, L. E. Afanas’eva, I. A. Barabanova, et al., “Microstructure and properties of Ti – 6Al – 4V alloys obtained by the process of layer-after-layer electron beam synthesis,” Metalloved. Term. Obrab. Met., No. 6, 45 – 50 (2015).Google Scholar
  4. 4.
    V. S. Muratov and E. A. Morozova, “Laser alloying of titanium surface with iron,” Zagot. Proizvod. Mashinostr., No. 8, 33 – 37 (2016).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Samara State Technical UniversitySamaraRussia

Personalised recommendations