Advertisement

Metal Science and Heat Treatment

, Volume 60, Issue 7–8, pp 413–420 | Cite as

Effect of “Incomplete” Austenitization Under Isothermal Quenching on the Structure and Properties of High-Strength Cast Iron Alloyed with Nickel and Copper

  • K. V. Makarenko
  • E. A. Zentsova
CAST IRONS
  • 16 Downloads

The effect of the mode of isothermal quenching on the special features of formation of bainitic structures in high-strength cast irons with globular graphite is studied. The regular features of the influence of isothermal quenching on the mechanical properties of the alloyed irons are determined. It is shown that the process of formation of bainite in the irons is affected considerably by the austenitization temperature. Control of this temperature makes it possible to control the mechanical properties of the metal.

Key words

cast iron copper nickel structure bainite ferrite isothermal quenching mechanical properties Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 3 – 10, July, 2018. 

References

  1. 1.
    G. I. Silman and K. V. Makarenko, “Graphitized cast irons,” Metalloved. Term. Obrab. Met., No. 2, 3 – 10 (2014).Google Scholar
  2. 2.
    S. N. Lekakh, “A new attitude to cast iron with globular graphite,” Liteinoe Proizvod., No. 10, 2 – 6 (2014).Google Scholar
  3. 3.
    N. N. Aleksandrov, N. I. Bekh, M. V. Zubkov, et al., “Inexhaustible possibilities of high-strength cast iron with globular graphite. Pt. 1,” Liteinoe Proizvod., No. 11, 7 – 11 (2013).Google Scholar
  4. 4.
    V. B. Bublikov, “High-strength and special cast irons,” Liteinoe Proizvod., No. 9, 6 – 7 (2012).Google Scholar
  5. 5.
    A. A. Anikin, S. B. Venig, D. I. Gribov, and A. G. Zhukov, “Globular graphite: structure, composition,” Metalloved. Term. Obrab. Met., No. 3, 3 – 7 (2014).Google Scholar
  6. 6.
    G. I. Silman, K. V. Makarenko, V. V. Kamynin, and E. A. Zentsova, “Bainitic high-strength cast iron with globular graphite,” Metalloved. Term. Obrab. Met., No. 4, 3 – 8 (2013).Google Scholar
  7. 7.
    A. A. Zhukov, “Some aspects of the theory and practice of bainitic hardening of cast irons,” Metalloved. Term. Obrab. Met., No. 12, 26 – 29 (1995).Google Scholar
  8. 8.
    A. A. Zhukov, “About the austenite-stabilizing action of silicon in heat-treated cast irons and steels,” Liteinoe Proizvod., No. 11, 28 – 29 (2001).Google Scholar
  9. 9.
    A. I. Belyakov, “Bainitic cast iron with globular graphite—material of the 21st century,” Zagot. Proizvod. Mashinostr., No. 1, 36 – 41 (2010).Google Scholar
  10. 10.
    V. L. Naydek, V. P. Gavrilyuk, and I. G. Neizhko, Bainitic High-Strength Cast Iron [in Russian], FTIMS, Kiev (2008), 140 p.Google Scholar
  11. 11.
    R. H. Juneja, A. K. Chakrabati, A. Basak, and A. Bhattacharya, “Austempering ductile iron alloyed with copper and manganese,” Foundry Manag. Technol., No. 2, 64 – 67 (1989).Google Scholar
  12. 12.
    G. I. Silman, “Phase diagram of alloys of the Fe – C – Mn system and some structural effects in this system. Pt. 1. Interphase distribution of manganese,” Metalloved. Term. Obrab. Met., No. 2, 11 – 15 (2005).Google Scholar
  13. 13.
    I. E. Lev, L. A. Solntsev, and N. S. Mitskevich, “Intracrystalline segregation in magnesium cast iron alloyed with copper,” Liteinoe Proizvod., No. 1, 4 (1981).Google Scholar
  14. 14.
    N. V. Chernyshova, G. I. Ezhov,M. V. Kukhtin, and G. G. Boiko, “Effect of copper on the microsegregation of silicon in highstrength cast irons,” Izv. Vysh. Uchebn. Zaved., Chern. Metallurg., No. 7, 113 – 115 (1986).Google Scholar
  15. 15.
    V. V. Kaubrak and V. S. Churkin, “Special features of the action of copper on structure formation in cast iron,” Liteinoe Proizvod., No. 7, 9 – 11 (1993).Google Scholar
  16. 16.
    G. I. Silman, The Thermodynamics and Thermokinetics of Structure Formation in Cast Irons and Steels [in Russian], Mashinostroenie, Moscow (2007), 302 p.Google Scholar
  17. 17.
    A. D. Sherman and A. A. Zhukov (eds.), Cast Iron [in Russian], Metallurgiya, Moscow (1991), 576 p.Google Scholar
  18. 18.
    K. V. Makarenko and E. A. Zentsova, “A method of heat treatment of cast iron with globular graphite, Patent 2504597 RF, MPK C22C37_04; C21D5/14, Appl. No. 2012124578/02,” Byull. Izobr. Polezn. Modeli, No. 2 (2014), reg. 14.06.2012.Google Scholar
  19. 19.
    E. V. Zakharchenko, Yu. N. Levchenko, V. G. Gorenko, and P. A. Varenik, Castings from Iron with Globular and Vermicular Graphite [in Russian], Naukova Dumka, Kiev (1986), 248 p.Google Scholar
  20. 20.
    G. I. Silman, Iron–Carbon, Iron–Carbon–Silicon and Iron–Carbon–Aluminum Systems [in Russian], TNT, Stary Oskol (2012), 336 p.Google Scholar
  21. 21.
    G. I. Silman, “Compilative Fe – Ni phase diagram with author’s correction,” Metalloved. Term. Obrab. Met., No. 3, 3 – 10 (2012).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Bryansk State Technical UniversityBryanskRussia

Personalised recommendations