Advertisement

Mechanics of Composite Materials

, Volume 54, Issue 3, pp 349–350 | Cite as

Strength Characteristics of the Filaments and a Basalt Fiber Roving at Different Clamping Lengths and Deformation Rates

  • S. M. Shebanov
  • I. K. Novikov
  • A. A. Koudryavtsev
  • K. Z. Gumargalieva
  • O. B. Ananyin
  • I. A. Gerasimov
  • A. V. Pavlikov
Article
  • 24 Downloads

The strength properties of filaments and a basalt fiber roving of industrial production were investigated at different clamping lengths and deformation rates. The deformation rate for filaments was varied from 1 to 20 mm/min, but the clamping lengths selected were 10, 20, 30, and 50 mm. No clamping-length-dependence of strength parameters of the roving in the range of 350-600 mm was detected. The results found for basalt fiber filaments were compared with published data for Kevlar29 aramid, T300 carbon, and Advantex glass fiber filaments.

Keywords

strength basalt fiber filament roving 

Notes

Acknowledgement

The authors are gratefull to the assistant director of NPO “Stekloplastik” B. K. Gromkow for the support and attention to this work.

References

  1. 1.
    Basalt fiber: from earth an ancient material for innovative and modern application [site] URL: <http://www.enea.it/it/pubblicazioni/EAI/anno-2011/indice-world-view-3-2011/basalt-fiber-from-earth-an-ancient-material-for-innovativeand-modern-application> (date of the reference 05.04.2018)
  2. 2.
    Yu. G. Korabel’nikov, V. P. Tamuzh, O. F. Siluyanov, V. M. Bondarenko, and M. T. Azarova, “Scale effect of strength of fibers and properties of unidirectional composites based on them,” Mech. Compos. Mater., 20, No. 2, 195-200 (1984).Google Scholar
  3. 3.
    F. An et al. “Preparation and characterization of carbon nanotube-hybridized carbon fiber to reinforce epoxy composite,” Mater. Des., 33, 197-202 (2012).CrossRefGoogle Scholar
  4. 4.
    H. D. Wagner, S. L. Phoenix, and P. Schwartz, “A study of statistical variability in the strength of single aramid filaments,” J. Compos. Mater. 18, No. 4, 312-338 (1984).CrossRefGoogle Scholar
  5. 5.
    L. Yang and J. L. Thomason, “Effect of silane coupling agent on mechanical performance of glass fiber,” J. Mater. Sci., 48, No. 5, 1947-1954 (2013).CrossRefGoogle Scholar
  6. 6.
    A. A. Dalinkevich et al, “Modern basalt fibrous materials and basalt fiber-based polymeric composites,” J. Natural Fibers, 6, No. 3, 248-271 (2009).CrossRefGoogle Scholar
  7. 7.
    A.A., Dalinkevich etc. “Modern basalt fibers and polymeric composite materials on their basis (review),” Structures from Composite Materials, No. 3, 37-54 (2010).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • S. M. Shebanov
    • 1
  • I. K. Novikov
    • 2
  • A. A. Koudryavtsev
    • 3
  • K. Z. Gumargalieva
    • 4
  • O. B. Ananyin
    • 2
  • I. A. Gerasimov
    • 2
  • A. V. Pavlikov
    • 5
  1. 1.ZAO LEKIS (Laboratory of Experimental Research)MoscowRussia
  2. 2.National Research Nuclear University “MIFI”MoscowRussia
  3. 3.ООО “ТЕSKAN”St. PetersburgRussia
  4. 4.N. N. Semyonov Institute of Chemical Physics of the Russian Academy of SciencesMoscowRussia
  5. 5.M. Lomonosov Moscow State UniversityMoscowRussia

Personalised recommendations