Thermoelastoplastic deformation of complexly reinforced shells
- 19 Downloads
- 2 Citations
Abstract
The problem on the elastoplastic deformation of reinforced shells of variable thickness under thermal and force loadings is formulated. A qualitative analysis of the problem is carried out and its linearization is indicated. Calculations of isotropic and metal composite cylindrical shells have shown that the load-carrying capacity of shell structures under elastoplastic deformations is several times (sometimes by an order of magnitude) higher than under purely elastic ones; the heating of shells with certain patterns of reinforcement sharply reduces their resistance to elastic deformations, but only slightly affects their resistance to elastoplastic ones; not always does the reinforcement in the directions of principal stresses and strains provide the greatest load-carrying capacity of a shell; there are reinforcement schemes that ensure practically the same resistance of shells at different types of their fastening.
Keywords
composites metal composites reinforcement shells thermoelastic deformation thermoelastoplastic deformation load-carrying capacityPreview
Unable to display preview. Download preview PDF.
References
- 1.S. A. Ambartsumyan, General Theory of Anisotropic Plates [in Russian], Nauka, Moscow (1974).Google Scholar
- 2.A. K. Malmeister, V. P. Tamuzh, and G. A. Teters, Strength of Polymer and Composite Materials [in Russian], Zinatne, Riga (1980).Google Scholar
- 3.Yu. V. Nemirovskii and B. S. Reznikov, Strength of Structural Elements of Composite Materials [in Russian], Nauka, Novosibirsk (1986).Google Scholar
- 4.Ya. M. Grigorenko, Isotropic and Anisotropic Layered Shells of Revolution of Variable Stiffness [in Russian], Naukova Dumka, Kiev (1973).Google Scholar
- 5.M. I. Erkhov, Theory of Perfectly Plastic Bodies and Structures [in Russian], Nauka, Moscow (1978).Google Scholar
- 6.Composite Materials. Handbook [in Russian], Naukova Dumka, Kiev (1985).Google Scholar
- 7.L. A. Agalovyan, Asymptotic Theory of Anisotropic Plates and Shells [in Russian], Nauka, Moscow (1997).Google Scholar
- 8.Yu. V. Nemirovskii and A. P. Yankovskii, “On the limits of applicability of some theories for calculating bent reinforced plates,” Nauch. Vestn. Novosib. Gos. Tekh. Univ., 18, No. 3, 91–113 (2004).Google Scholar
- 9.N. N. Malinin, Applied Theory of Plasticity and Creep [in Russian], Mashinostroenie, Moscow (1968).Google Scholar
- 10.Yu. V. Nemirovskii and A. P. Yankovskii, “Thermoelastoplastic bending of complexly reinforced plates,” Mech. Compos. Mater., 41, No. 6, 477–496 (2005).CrossRefGoogle Scholar
- 11.Yu. V. Nemirovskii and A. P. Yankovskii, “On some features of the equations of shells reinforced with fibers of constant cross section,” Mekh. Kompozits. Mater. Konstr., 3, No. 2, 20–40 (1997).Google Scholar
- 12.E. Kamke, Differentialgleichungen. Losungsmethoden und Losungen. Bd. II. Partielle Differentialgleichungen erster Ordnung für eine gesuchte Funktion, Leipzig (1959).Google Scholar
- 13.Yu. Nemirovskii and A. P. Yankovskii, “Thermal conductivity of fibrous shells,” Teplofiz. Aeromekh., 5, No. 2, 215–235 (1998).Google Scholar
- 14.N. N. Kalitkin, Numerical Methods [in Russian], Nauka, Moscow (1978).Google Scholar